FIBARO Smart Module & Double Smart Module

Introduction

The remotely operated FIBARO Smart Module and Double Smart Module are designed to turn electrical devices or circuits on and off. The Smart Module allows control of one device or circuit, while the Double Smart Module allows control of up to two devices or circuits. Their compact size enables installation within the housings of other devices. Control is achieved via the Z-Wave network or directly through connected buttons.

Specifications

Warnings

DANGER OF ELECTROCUTION!

The device is designed to control other electrical devices and operate in their housings. Faulty connection or use may result in fire or electric shock. All works on the device may be performed only by a qualified and licensed electrician. Observe national regulations. Even when the device is turned off, voltage may be present at its terminals. Any maintenance introducing changes into the configuration of connections must be always performed with disconnected voltage (disable the fuse). Always use the same power source for L and IN terminals.

CAUTION!

• Failure to observe recommendations included in this manual may be dangerous or cause a violation of the law.
• Check the operating/maintenance manual of the device you want to control to make sure the connection is safe and allowed.
• Do not connect devices which are not compliant with the specification or relevant safety standards.
• Do not place the device in metal enclosures or on metal surfaces, as this may considerably reduce the range of operation.
• Do not expose this product to moisture, water or other liquids. Do not use in bathrooms and other high humidity rooms.
• This product is designed for indoor use only. Do not use outside!
• This product is not a toy. Keep away from children and animals!

Basic Activation of the Device

1. Switch off the power supply.
2. Connect the device in accordance with one of the diagrams:
   • A - Example connection of Smart Module
   • B - Example connection of Double Smart Module
   (Diagrams show connections for power, switches S1/S2, and output Q for FGS-214, and Q1/Q2 for FGS-224)
3. Switch on the power supply.
4. Set the main Z-Wave controller into adding mode.
5. Quickly, three times click the B-button (service button).
6. Wait for the device to be added into the system.
7. Successful adding will be confirmed by the controller.

Default Operation

The default operation requires momentary switches. Change the configuration to use other types of switches.

• 1 x click S1 – switch 1st channel
• 1 x click S2 – switch 2nd channel (only FGS-224)

Wiring Diagrams Description

Diagram A: Smart Module (FGS-214)

This diagram illustrates the basic wiring for the FIBARO Smart Module (FGS-214). It shows connections for the power supply (L, N, and 24-30V DC terminals), input switches (S1 and S2), and the output terminal (Q) for controlling the connected electrical device.

Diagram B: Double Smart Module (FGS-224)

This diagram shows the basic wiring for the FIBARO Double Smart Module (FGS-224). It includes connections for the power supply (L, N, and 24-30V DC terminals), input switches (S1 and S2), and two output terminals (Q1 and Q2) for controlling up to two separate electrical devices.

Warranty

FIBAR GROUP S.A. guarantees that the Device is free from material and manufacturing defects for a period of 24 months from the date of purchase by the consumer, or 12 months from the date of purchase by a business customer. The Manufacturer is responsible for malfunctioning due to physical defects. Defects will be removed by repair or replacement within 30 days of delivery to an Authorized Guarantee Service (AGS). Claims require a valid guarantee document and proof of purchase. The warranty does not cover mechanical damage, damage from external causes (e.g., water, fire, natural disasters), software issues, electrical surges, improper installation, misuse, or unauthorized modifications. The Manufacturer is not liable for consequential damages.

Compliance

Simplified EU Declaration of Conformity

Fibar Group S.A. declares that the device complies with Directives 2014/53/EU and 2011/65/EU, 2015/863. The full text is available at: www.manuals.fibaro.com.

WEEE Directive Compliance

Devices labeled with the WEEE symbol should not be disposed of with household waste. They must be handed over to an applicable collection point for the recycling of waste electrical and electronic equipment.