S2 PRO Smart IPTV Receiver User Manual
Introduction
Thank you for choosing our smart IPTV receiver! This manual is designed to help you get the most out of your TV Box and use it efficiently.
Disclaimer
While efforts are made to provide up-to-date and accurate product information, we cannot guarantee the content is completely fault-free. We reserve the right to modify this manual without prior notice. Please visit our website for the latest updates.
Bluetooth Remote Pairing
Step 1: Press and hold the Voice/Microphone button on the remote control. Then, press and hold the [OK] and [Return] buttons together until the indicator light starts flashing. This indicates the remote is in pairing mode.
Step 2: Press the "OK" button again. The pairing process typically takes about 15 seconds.
Tip: If pairing fails, check the remote's distance from the TV box, ensure the battery is functioning correctly, or go to "Bluetooth" in System Settings and select "RC-200" for pairing.
Remote Control Button Definitions
- Navigation: Press to navigate left/right or up/down.
- OK: Press OK to confirm your selection.
- Volume (+/-): Increase or decrease volume.
- Voice Control: Press the button and follow on-screen instructions to pair via Bluetooth.
- Settings: Access system settings.
- Menu: Access the main menu.
- Numeric Buttons: For number input.
- Play/Pause: Control media playback.
- Stop: Stop media playback.
- Rewind: Rewind media.
- Fast Forward: Fast forward media.
- Back: Go back to the previous screen.
- Next: Go to the next item.
- Previous: Go to the previous item.
- Home: Return to the home screen.
- Info: Display information.
- Mute: Mute audio.
- Input: Change input source.
Problem Solving
| Question | Solution |
|---|---|
| No television signal | 1. Check that the HDMI or AV cable is securely connected. 2. Check that you have selected the correct input source on your TV. |
| You can't switch on your Smart TV Box | 1. Check that the power connector is fully connected to the DC socket on your Smart TV Box. 2. Check that the power supply is stable. |
| Cannot connect to the network | 1. Make sure that the network cable is firmly connected and that the Ethernet cable is working properly. 2. Make sure that the Wi-Fi network is activated and that the security key for the encrypted network is correct. 3. Make sure you have selected the correct IP address settings. |
| The remote control doesn't respond | 1. Make sure the batteries are good. 2. Check that the distance between the remote control and your Smart TV Box is no more than 8 metres. |
Connection Diagram
HDMI Connection:
- Connect one side of the HDMI cable to the product interface and the other side to your television.
- Adjust the TV's screen output settings to 720p or 1080p and then switch to the corresponding HDMI component video mode on the TV.
A/V Connection:
If your television doesn't have an HDMI connection, you can connect it using the AV cable. Connect one side of the AV cable to the product's interface and the other side to the television.
Network Connection:
- Wi-Fi: Once Wi-Fi is enabled, select a network name and enter the password.
- Ethernet: If using a network cable, select [DHCP] in the network settings.
Settings
Move to the [SETUP] icon and press the [OK] button to enter the system settings. Configure the display position of your Smart TV Box screen via Settings -> Display -> Display position.
Specifications
- Operating System: Android 12.0
- Processor: Quad-core ARM Cortex™-A53
- GPU: G31 Quad-core
- Memory: 2GB DDR3
- Internal Storage: 32GB EMMC
- Supported Video Decoder: H.265 10-bit up to HP Level 5.1, 4K2K@30fps (up to 250 Mbps)
- Supported Audio Formats: MP3, WMA, AAC, FLAC, etc.
- Supported Image Formats: JPG, JPEG, BMP, GIF, PNG
- Connectors: USB 2.0 x1, USB 3.0 x1, Host and SD/MMC card reader
- Networking: RJ45 100M Ethernet, Supports 802.11 a/b/g/n/ac (2.4GHz + 5.8GHz) Wi-Fi
- Audio/Video Output: Composite video editing, compatible with all TVs. Supports all standard SD/HD/UHD video output formats: 480i/p, 576i/p, 720p, 1080i/p, 6K
- HDMI Output: Supports HDMI 6K@60fps, Supports HD Audio (7.1CH)
Package Content
| No. | Photo | Name | Number |
|---|---|---|---|
| 1 | [Receiver Image] | Receiver | 1 |
| 2 | [Remote Control Image] | BT/IR Remote Control | 1 |
| 3 | [Power Adapter Image] | Power Adapter | 1 |
| 4 | [HDMI Cable Image] | HDMI Cable | 1 |
| 5 | [User's Manual Image] | User's Manual | 1 |
Note: Other elements are optional.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the device and receiver.
- Connect the device into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
FCC Radiation Exposure Statement
The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located for operating in conjunction with any other antenna or transmitter.
Warning
Attention!! Use the original HDMI cable and power source. Non-original cables may cause damage to the device.