Gallagher WiFi Gateway

Installation Instructions

Package Contents

• WiFi Gateway
• 1 x RJ12 cable
• 5V Power Supply
• Instructions

The Gallagher WiFi Gateway is compatible with all iSeries Energizers and provides the ability to manage your iSeries Energizer via the Gallagher Ag Devices app.

Installing your WiFi Gateway

Before installing your WiFi Gateway, ensure you have WiFi network coverage at the installation location of your iSeries Energizer. For remote locations, consider a cellular mobile hotspot as a connectivity solution.

To install your WiFi Gateway:

1. Turn off your Energizer.
2. Connect the RJ12 cable between the WiFi Gateway and the Energizer. If you wish to use the Energizer controller, it can also be connected directly to the WiFi Gateway.
3. Connect the supplied 5V power supply to the 110V/230V supply.

Note: If powering from a 12V battery, please contact a Gallagher representative for assistance.

Diagram: Installation Connections

The installation diagram illustrates the following connections:

• An iSeries Energizer is connected to a Controller (optional).
• An RJ12 cable connects the iSeries Energizer (or Controller) to the WiFi Gateway.
• The WiFi Gateway is connected to a 5V Power Supply.
• The WiFi Gateway also connects wirelessly to a WiFi Router or a Mobile Hotspot.
• A Mobile Device is shown connecting to the WiFi network (via Router or Hotspot) to manage the system.

Device Setup Instructions

Gallagher Ag Devices App

Control and view the performance of your iSeries Energizer. Receive notifications directly to your smartphone.

Connecting your App to your Energizer

Follow these steps to connect your app:

1. Add Energizer: Log in or create an account, then select "Add Energizer".

   (Visual: Screenshot of app showing "Hi Tom!" and an "Add Energizer" button)

2. Connect to WiFi or hotspot: Enter your WiFi or hotspot credentials.

   (Visual: Screenshot of app showing network selection and password input)

3. Blink-up devices: Follow the on-screen instructions to connect the devices.

   (Visual: Screenshot of app showing "Prepare for the Blink-up" screen)

4. A better view of your fence: View fence information, control your Energizer, and receive pre-set voltage notifications.

   (Visual: Screenshot of app showing fence status, voltage, and alerts)

FCC Compliance Information

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at their own expense.

For more information, visit www.gallagher.com.

Gallagher Private Bag 3026, Hamilton, New Zealand

Document Version: 08/20 v5