SATEL – Inteligentne systemy alarmowe
TCPDF
Instructions for Satel models including: ACSP-402, ACSP-402 Fire Alarm Control Panel, Fire Alarm Control Panel, Alarm Control Panel, Control Panel, Panel
8 days ago — monitor operation of automatic and manual call points, control sirens, control devices used to transmit fire alarms and failure signals.
File Info : application/pdf, 3 Pages, 147.02KB
DocumentDocumentACSP-402 The ACSP402 fire alarm control panel is designed to: monitor operation of automatic and manual call points, control sirens, control devices used to transmit fire alarms and failure signals control the operation of fire protection devices or systems, monitor the operation of fire protection devices or systems, monitor the operation of other external devices, control other external devices These features make it possible to detect a fire at its earlies stage and alert the users of the building with acoustic and/or optical signals as well as notify relevant services. This in turn allows one to quickly commence firefighting activities. The control panel can also automatically activate fire protection devices. System structure support for up to 256 zones support for up to 32 groups possibility to create interlinks between zones, subzones and groups support for up to 256 call points (detectors / MCPs) support for addressable detection circuits of the following types: loop (up to 2 circuits) radial line (up to 4 circuits) loop with a side line / side lines support for a printer extensive functions for testing the control panel and system Inputs 4 programmable inputs on the control panel mainboard (NO, NC) monitoring of external devices status, e.g. for reporting fire alarms and failures Outputs 2 control outputs for conventional sirens control output for fire alarm transmission devices control output for fault signal transmission devices 8 programmable relay outputs control of external devices output for controlling automatic fire protection equipment 24 V DC power supply output dedicated power supply output for ACSPETH and ACSPRSI modules signal delay at outputs RS485 communication buses 2 bus ports for connecting APSP402 repeater panel ACSPETH module (for extending the control panel with an Ethernet port) FIRE ALARM SYSTEMS ACSP System / Control panels The actual appearance of the products may differ from the presented images. Product descriptions are provided in the web service for information purposes only. www.satel.pl FIRE ALARM SYSTEMS ACSP System / Control panels ACSPRSI module (for optoisolation of the bus and connection of a printer) Email notification (requires connecting the ACSPETH module) 4 addresses for notification selection of event types for notification periodic diagnostic reports Setting up setting up with keys on the front panel of the control panel free ACSP Soft programme for configuring the control panel (USB port) Event memory nonvolatile memory for up to 9999 fire alarms nonvolatile memory for 8999 events (including fire alarms) Control panel mainboard module LEDs for signalling the status of the control panel and external devices LCD display for: setting up the control panel presenting information about fire alarm presenting information about disablement, test or failure conditions viewing the list of current disablement, test or failure conditions viewing the history of alarms and other events USB port to connect a computer power supply connection battery connection builtin piezo transducer for acoustic signalling realtime clock with battery backup power Power supply switching mode power supply APS318 with short circuit protection automatic switching to backup power supply (battery) in case of failure of the main power supply battery charging circuit with temperaturecompensated charging voltage monitoring of the battery status and disconnection of a flat battery The actual appearance of the products may differ from the presented images. Product descriptions are provided in the web service for information purposes only. www.satel.pl Number of fault transmission circuits Working voltage of the fault transmission Maximum current of the fault transmission circuit Terminating resistor on the fault transmission circuit Number of programmable relay outputs Stand-by supply: internal acid battery Stand-by supply: external acid battery Supply output AUX (only for connection of CSP-ETH module): with AC power supply failure Maximum battery charging current Terminating resistor on the alarm transmission circuit Delay time of alarm transmission to the outside Supply voltage (±15%) Maximum humidity Dimensions Maximum current consumption from the 230V network Transit temperature range Operating duration of the stand-by supply Maximum internal apparent resistance of the battery (with cables and terminals in a circuit) Current draw from the battery when detecting Current draw from the battery when emitting an alarm Current draw from an integrated AC power adapter when detecting Current draw from an integrated AC power adapter when emitting an alarm Sealing of the casing Events storage capacity Alarm counter capacity Operating temperature range Clock battery Output for communication with PC (service output) Terminating resistor on terminals for communication with the remote panel Output for communication with remote panel and CSP-ETH module Supply output +24V Supply output AUX (only for connecting CSP-ETH module): in standard mode Alarm resistor on the control input circuit Terminating resistor on the control input circuit Number of programmable control inputs Electrical parameters of relay outputs Number of alarm transmission circuits Working voltage of the alarm transmission circuit Maximum current of the alarm transmission circuit FIRE ALARM SYSTEMS ACSP System / Control panels 4 1 24 V DC±15% 180 mA 10 k±5% 8 12 V / 17 Ah 12 V / 33 Ah 12 V DC +15%, -20% 1,4 A 3,15 A 1,6 A 1,6 A 3,5 A 2 10 k±5% 100 (2 x 50) 128 32 32 10 200 mA 75 (2 x 37,5) 2 24 VDC 180 mA 10 k±5% 200 mA 2721 g 0...10 min 230 V AC, 50-60 Hz 93±3% 324 x 382 x 108 mm 300 mA -25...+55°C 72 h 1,1±10% 220 mA 320 mA 200 mA 300 mA IP30 8999 9999 -5...+40°C 3 V (CR2032) USB typ B 100 transmisja szeregowa 24 V DC±15% 18 V DC +5%, -15% 1 k±5% 10 k±5% 4 1A / 30 V DC (NO or NC) 1 24 V DC±15% 180 mA The actual appearance of the products may differ from the presented images. Product descriptions are provided in the web service for information purposes only. www.satel.pl