Blaupunkt 70" 4K Ultra HD Android TV - BP700USG9200 Instruction Manual
General Safety
Read this manual thoroughly before you start using the TV. Store this manual, the completed warranty card, your receipt and the product packaging. The safety precautions instructions reduce the risk of fire, electric shock and injury when correctly complied to. Please follow all instructions and take notice of all warnings.
[Caution: Risk of Electric Shock] [Do Not Open]
The cover (or back) of the unit should not be removed to prevent risk of electric shock. This unit must be serviced by a qualified service personnel only.
[Warning: High Voltage] The lightning flash symbol within the triangle is intended to warn you of a non-insulated dangerous voltage in the product's enclosure that could be of sufficient magnitude to generate a risk of electric shock to persons.
[Information: Important Instructions] The exclamation point within the triangle is intended to warn you to the presence of important operating and maintenance instructions in the documents included with the product.
IMPORTANT INFORMATION
The lightning flash symbol within the triangle is intended to warn you of non-insulated dangerous voltage the product's enclosure that could be of sufficient magnitude to generate a risk of electric shock to persons.
- Using cabinets or stands recommended by the manufacturer of the television.
- Only using furniture that can safely support the Products.
- Ensure the Product is not overhanging the edge of the supporting furniture.
- Do not place the product on high furniture without securing both the furniture and the product to a stable support.
- Do not place the product on cloth or other conductive materials.
- Warn children of the dangers of climbing on furniture to reach the television or its controls and to call for an adult to assist.
IMPORTANT INFORMATION (CONT.)
- Do not expose this appliance to rain or moisture as it may result in fire or an electric shock hazard.
- Do not tamper or change or modify the product in any way.
- Only use accessories outlined and recommended by the manufacturer.
- Please do not expose the product to splashing or water contact.
- Please do not place any object on top of the product including objects filled with liquids such as vases.
- Danger of explosion if battery is incorrectly placed. Replace with same or equivalent type.
Installation
Please follow instructions when installing this product in accordance with the instruction manual. This product must be positioned in a sufficiently stable location; it can be potentially hazardous due to falling and can cause injury, particularly to children if it is positioned incorrectly.
- Before installing this TV set, make sure your outlet voltage corresponds to the voltage stated on the product rating label.
- Do not use a damaged power cord, plug, or loose outlet. Doing so may cause an electric shock.
- Do not plug several devices into the same outlet. Doing so may cause the outlet to overheat and start a fire. Make sure the outlet is readily accessible during operation of the equipment.
- Do not bend, twist, or kink the power cord excessively.
- Do not allow anything to rest on or roll over the power cord and antenna cable. Doing so may cause a fire or an electric shock.
- Do not run the power cord near heat-producing appliances such as radiators, stoves, or irons. The excessive heat could melt the insulation and expose live wires, resulting in fire or electric shock.
- Unplug this TV during lightning storms or when unused for long periods of time. Not doing so may result in fire or electric shock.
- Do not cover the ventilation openings of the product with items such as newspapers, tablecloths, curtains, etc., or insert objects into the slots available on the products. As this could result in the product temperature rising and could cause a fire.
- If you notice any unusual odors or smoke around the unit, immediately disconnect the unit from the outlet and contact the service center. Failure to do so may result in fire or electric shock.
- When not using the unit for long periods of time or when you are moving the unit, please ensure to disconnect the power cord from the wall socket.
General Safety (Cont.)
- Please beware that dust could accumulate over time on the unit and cause it to generate heat and/or deteriorate insulation, which in turn may result in an electrical fire.
- The product is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or young children of any age. They must be supervised by a person responsible for their safety.
- Batteries from the remote control must be removed only by an adult. The adult must ensure to keep them out of reach of infants and children. Seek medical attention immediately if a child has swallowed a battery.
- Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire, or the like.
- To maintain the product, do not use any chemical or cleaning agent or wet cloth. Please only ensure to utilize a dry cloth to wipe it down from marks or dust and only after unplugging the product from the power socket.
- Please ensure to contact the customer support center for any repair or service required for the products.
- Make sure to always carry the TV from the sides; always be sure to have assistance by another person. Do not carry the TV from the middle.
WARNING!
It is STRONGLY RECOMMENDED that you ANCHOR this product. Toppling furniture and TVs can cause serious injury or death. TO HELP AVOID ANY SERIOUS OR FATAL INJURY, WE STRONGLY RECOMMEND THAT THIS PRODUCT BE PERMANENTLY FIXED TO THE WALL OR OTHER SUITABLE SURFACE. FIXING DEVICES ARE NOT INCLUDED SINCE DIFFERENT SURFACE MATERIALS REQUIRE DIFFERENT ATTACHMENTS. PLEASE SEEK PROFESSIONAL ADVICE IF YOU ARE IN DOUBT WHAT FIXING DEVICE TO USE.
If a television is not positioned in a sufficiently stable location, it can be potentially hazardous due to falling. Many injuries, particularly to children, can be avoided by taking simple precautions such as:
- Using cabinets or stands recommended by the manufacturer of the television.
- Only using furniture that can safely support the television.
- Ensuring the television is not overhanging the edge of the supporting furniture.
- Not placing the television on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television to a suitable support.
- Not standing the television on cloth or other materials placed between the television and supporting furniture.
- Educating children about the dangers of climbing on furniture to reach the television or its controls.
General Safety (Cont.)
Please make sure upon positioning this product, the place is:
- Not wet or damp and well-ventilated.
- Away from direct sunlight or heaters.
- Away from splashes or food.
- Protected from excessive dust or grease.
- Do not install this equipment in a confined space such as a bookcase or similar unit.
- Do not install the TV set near heat sources such as radiators, stoves, or other audio visual equipment that produce heat.
- Do not place containers with liquids; if liquid falls inside the products, it may result in short-circuit, fire, or electric shock.
- Do not place small metallic objects on top of the unit. Metal objects falling inside the product may result in short-circuit, fire, or electric shock.
- Do not use or store flammable or combustible materials near the unit. Doing so may result in fire or explosion. Do not place any naked flame sources, such as lit candles, cigarettes, or incense sticks, on top of the TV set.
- The antenna must be installed away from high-voltage power lines.
- Please contact an antenna professional installer to install the antenna to avoid incorrect installation which could result in fire, electric shock, or serious injury.
- Install the unit at a reasonable distance from the wall to ensure sufficient ventilation.
- If a mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
[Double Insulation Symbol] This symbol indicates that the appliance has double insulation between the dangerous mains voltage and the parts accessible to the user. In the event of repairs, use only identical spare parts.
"HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC."
Installation
Install the stand as described below, or if you want to mount it to a wall, please contact a professional installer. Please ensure the TV is not plugged into the wall socket and furthermore, we recommend to get another person to assist in the following task.
Attaching the stand
Step 1
Place a soft cushioned material on top of a flat surface to prevent damaging the screen panel. Then place the TV screen flat on top, with the screen side facing down, as illustrated.
Step 2
Align the stand leg to the installation point, as illustrated.
Step 3
Tighten the screws (supplied) with a screwdriver to affix the stand to the panel, as illustrated.
[Diagram: TV stand attachment showing 4 screws (4x14mm)]
CAUTION!
Do not apply excessive force as this may damage the screw holes.
Wall-Mounting Instructions
Please ensure the TV is not plugged into the wall socket and furthermore, we recommend to get another person to assist in the following task.
- We recommend you use a professional installer as we assume no liability for any eventual damage to the product or injury to yourself if you mount the TV on your own.
[Diagram: Back of TV showing VESA pattern 400(w) x 200(h) mm with dimensions indicated]
NOTE: If you are wall-mounting the TV, this should be done by a qualified installer.
Controls and Connections
[Diagram: TV screen showing home screen interface, with an arrow pointing to the base of the TV. Below is a diagram of the TV base with a circular control. Labels indicate:
- Long Press - Standby
- Short Press - Select
- Channel Up / Up (menu)
- Volume Down / Left (menu)
- Volume Up / Right (menu)
- Channel Down / Down (menu)
(Note: The on-screen interface shown is a generic Android TV home screen.)
SIDE PORTS
[Diagram: Top view of TV side showing ports labeled:]
- 1. USB
- 2. HDMI 1 (ARC)
- 3. HEADPHONE
BOTTOM PORTS
[Diagram: Bottom view of TV showing ports labeled:]
- 4. RJ45 (ETHERNET)
- 5. OPTICAL
- 6. USB
- 7. USB
- 8. HDMI 3
- 9. HDMI 4
- 10. HDMI 2
- 11. AV IN
- 12. ANT (RF)
Port List:
- USB INPUT
- HDMI 1 / ARC
- HEADPHONE PORT
- RJ45 (ETHERNET)
- OPTICAL
- 2X USB INPUT
- HDMI 3
- HDMI 4
- HDMI 2
- MINI AV INPUT
- ANTENNA (RF)
USB connection
Insert a USB storage device into the USB port to record, playback of video/music/photo.
Remote Control
[Diagram: Image of the remote control with numbered buttons. The functions are detailed in the following list.]
Remote Control Functions:
- POWER: Turn the TV on/off.
- INPUT: Open Input menu (DTV, HDMI1, HDMI2, etc).
- NETFLIX: Open Netflix.
- YouTube: Open YouTube.
- Record Button: Start recording DTV Channel (must have USB drive inserted).
- STOP: Stop multimedia playback, Recording and Timeshift mode.
- MUTE: Turn the sound on or off.
- REWIND: Rewind playback in multimedia/timeshift mode.
- FAST FORWARD: Fastforward playback in multimedia/timeshift mode.
- PLAY/PAUSE: Play/Pause playback in multimedia/timeshift mode.
- TEXT: Teletext Mode.
- GUIDE: Display electronic TV guide in DTV mode.
- ASPECT: Adjust Aspect ratio of the TV.
- ARROWS (Navigation): Navigate on-screen menu, OK to confirm selection.
- RETURN: Return to previous menu.
- HOME: Open Android TV home page.
- MENU: Open or close on-screen menu.
- Google Assistant Button: Start a voice search or speak to Google Assistant.
- VOLUME: Increase or decrease TV volume.
- CHANNEL: Next or previous TV channel.
- NUMBERS: Direct access to desired channels.
- INFO: Display channel information.
- Last Viewed Channel Button: Jumps to last viewed channel.
- Color Buttons (Red, Green, Yellow, Blue): Operations according to the prompt within menu or while watching TV.
Using the Remote Control
- Do not mix old and new batteries in the remote.
- Do not use different types of battery.
- If you do not intend to use the unit for a long time, please remove batteries from the remote to avoid accident.
- Keep batteries away from children and pets.
- Never throw batteries into a fire.
- Do not drop or impact the remote control as it voids the warranty immediately.
- The remote control operates at a range of 5 to 6 meters effectively.
- Do not expose the remote control sensor to a bright light.
How to open back of remote control to replace batteries
- Look for the hole at the back side, bottom of the remote. Use this hole to either place your nail (if long enough) or another thin object to pop open the cover.
- Place/Replace the batteries, making sure that the 2x AAA batteries (included) polarities (+/-) match the battery compartment polarities (+/-).
- When closing the back cover, place the top side edge of the back cover in first, then the bottom side (where the opening hole is) when pushed in will click shut.
[Images: Showing how to open the remote battery compartment and insert batteries.]
Initial Setup
For the first initial setup, an on-screen setup wizard will guide you through setting up your TV. Please follow the on-screen guide to set up your TV correctly. Be sure to follow the below prompts to pair your Bluetooth remote control. After the pairing is successful, you can now operate the TV.
[Image: Screenshot of 'Searching for accessories...' screen during Bluetooth pairing. Text explains to press and hold LEFT and MENU buttons for 5 seconds to enable Google Assistant mic on the remote. If pairing is unsuccessful, wait and try again. Press BACK key to exit.]
Use the [Up/Down Arrow Buttons] to select system language, then press OK/SELECT to confirm.
[Image: Screenshot of 'Welcome' screen with language selection options including English, Afrikaans, Azerbaijani, Catalan, Czech, Danish, German.]
Initial Setup (Cont.)
If you just want to use your TV normally, please select "SKIP". To connect your Android Smartphone to your TV, select "Continue".
[Image: Screenshot of 'Quickly set up your TV with your Android phone?' screen.]
Press [Up/Down Arrow Buttons] to select your Wi-Fi network, enter the password, and then confirm to connect.
[Image: Screenshot of 'Select your Wi-Fi network' screen showing available networks like '3686', 'ChinaNet-Wepx', 'iServer-netgear-5G', 'JRX-guest'. Option to connect via Ethernet is also shown.]
By accepting the Google Terms of Service to improve the product experience, select "ACCEPT" to proceed with this condition.
[Image: Google Terms of Service screen with options to Accept, view Terms of Service, Privacy Policy, and Play Terms of Service.]
Initial Setup (Cont.)
Select "YES" if you want your location identified on your ANDROID TV. (Note: Select "YES" if you want Google to inform you on weather more accurately based on location).
[Image: Google Location settings screen with 'Yes' and 'No' options.]
By agreeing and selecting "YES", you agree to automatically send diagnostic information to Google to help improve your Google experience.
[Image: Google 'Help improve Android' screen with 'Yes' and 'No' options.]
Initial Setup (Cont.)
Informational screens will now appear; you can scroll through steps by pressing the "RIGHT" directional button to continue.
[Image: Series of three screens showing 'Your BLAUPUNKT 4K Android TV is powered by...', 'Get apps from Google Play', and 'Cast to your TV'.]
Select the country you are using the device in with the [Up/Down Arrow Buttons].
[Image: Country selection screen showing Austria, Australia, India, New Zealand, Belgium.]
Used to set a password of your TV for security purposes.
NOTE: Make sure to save the password, as you can then refer to it when required.
[Image: Password input screen showing 'Please set password. '0000' is invalid.']
Initial Setup (Cont.)
Select the TimeZone you are using the device in with the [Up/Down Arrow Buttons].
[Image: Time Zone selection screen showing various time zones like NSW/ACT, VIC, QLD, SA, WA, TAS, NT.]
Please be sure in this step, select "HOME" if you are using this TV for use at home. Make sure to confirm once you have selected "HOME".
[Image: Screenshot of 'Select TV mode' screen with 'Home' and 'Retail' options.]
Let this device be detected as a Google Cast device and allow Google Assistant and other services to wake this device up to respond to Cast commands, even when on standby and the screen is off.
[Image: 'Chromecast built-in always available' screen with 'On' and 'Off' options.]
Make sure to select "SCAN" to auto tune your TV to search for local DTV channels.
[Image: 'Channel Scan' screen with 'Scan' and 'Skip Scan' buttons.]
NOTE: Please make sure Antenna (RF) cable is plugged into the ANT IN port located on back of TV. (Refer to page 11 TV ports - #10).
Android TV - Home Screen
Once you have completed initial setup, you will now enter the ANDROID TV home screen.
[Image: Screenshot of the Android TV Home Screen with numbered elements.]
- Search Bar: Search movies, TV, and more.
- Apps Icon: Access all applications.
- NETFLIX, YouTube, Google Play Store, Google Play Movies & TV: Pre-installed applications row. Select "Google Play Store" to search and download additional apps optimized for Android TV.
- Notification Area: Displays all notifications relating to your ANDROID TV.
- INPUTS: Select to adjust your TV Input (e.g., DTV, HDMI 1, HDMI 2).
- NETWORK: Displays network connectivity (Wi-Fi or ETHERNET).
- SETTINGS: Select to access TV settings.
- Time Display: Displays current time.
- Content Rows: Rows below display recommended content from installed apps.
Google Play Store
To have access and to download applications from the Google Play Store, you must sign in with a Gmail account. Once you open Google Play Store, you will be prompted to sign in or create a new account.
[Image: Google Play Store sign-in screen.]
Once you have signed in, you will be brought to the page below. Scroll through the list of applications available for download, OR go to the search button, and search via entering text or speaking to Google Assistant via your remote control.
[Image: Google Play Store interface showing app categories and featured apps like 'Tubi - Free Movies & TV'.]
Google Assistant
You now have access to Google Assistant via the [Apps Icon] (#1 on page 20) or by pressing the [Google Assistant Button] on your remote control to commence.
[Image: Screenshot of the Google Assistant interface showing 'Listening...' status and a search query example.]
Allow for the voice box to appear at the bottom of your TV screen, stating: "Listening", then speak clearly towards the top of your remote control for Google Assistant to hear you. Once Google Assistant understands, what you have requested will be actioned.
[Image: Remote control with a speech bubble showing "What's the weather today?"]
Input Menu
To access the INPUT menu, either select INPUT (#4 on page 20) via the HOME screen or press the SOURCE button on your remote control to have quick access to the INPUT menu. The options that are AVAILABLE will be highlighted; PORTS that are not in use, you will not be able to access.
[Image: Input menu screen showing options like Channels, HDMI 1, HDMI 2, HDMI 3, HDMI 4, Composite.]
Settings
To access the SETTINGS menu, select SETTINGS (#6 on page 20) via the HOME screen.
[Image: Settings menu screen showing Suggestions, Quick Settings, and General Settings categories like Network & internet, Channel, Accounts & sign-in, Apps, Device Preferences, Remotes & Accessories.]
Network & Internet
To access the NETWORK menu, select the WIFI icon (#5 on page 20) via the HOME screen or go into Settings (#6 on page 20) menu and go down and select "Network & Internet".
[Image: Network & Internet settings screen showing Wi-Fi status, available networks, and other options.]
Channel Menu
To access the CHANNEL menu, select the SETTING icon (#6 on page 20) via the HOME screen. Then go down and select "CHANNEL".
Channels
Display the scan sub-menu based on different channel installation modes.
- Antenna: Set the signal type to antenna; when set to antenna, the TV can now receive digital broadcasting signals.
Auto Channel Update
Enable or disable, allows your TV to automatically update if any changes made to scanned DTV channels.
Parental Controls
Audio Channel
Open Source Licenses
Version: 2.28.5 build 18321512
Device Preferences - About
To access the ABOUT menu, select SETTING icon (#6 on page 20) via the HOME screen. Then go down and select "ABOUT".
[Image: About screen showing System update, Device name, Production Name, Restart, Status, Legal information, Model, Version.]
Time
To access the DATE & TIME menu, select SETTING icon (#6 on page 20) via the HOME screen. Then go down and select "DATE & TIME".
[Image: Date & time screen showing Automatic date & time, Set date, Set time, Set time zone, Use 24-hour format options.]
Input Settings Menu
To access INPUT SETTINGS menu:
- Select SETTING icon (#6 on page 20) via the HOME screen.
- Select "Device Preferences".
- Then go down and select "INPUTS".
[Image: Input Settings screen showing Standby Inputs, HDMI 4, HDMI 3, HDMI 2, HDMI 1, Composite. Also shows HDMI control, Device auto power off, TV auto power on options.]
Power Settings Menu
To access POWER SETTINGS menu:
- Select SETTING icon (#6) via the HOME screen.
- Select "Device Preferences".
- Then go down and select "POWER".
Sleep Timer: Options of Off, 10 mins, 20 mins, 30 mins, 40 mins, 50 mins, 60 mins, 90 mins, and 120 mins to auto turn off your TV.
Picture Off: Turn off your display (recommended not to select this option).
No Signal Auto Power Off: Turns your TV off if no signal is detected.
[Image: Power settings screen showing Sleep Timer, Picture off, Switch off timer, No Signal Auto Power Off options.]
Picture Settings Menu
To access PICTURE SETTINGS menu:
- Select SETTING icon (6) via the HOME screen.
- Select "Device Preferences".
- Then go down and select "PICTURE".
Picture Mode: Options to choose from - Standard, Vivid, Sport, Movie, Game, Energy Saving, User.
HDR: The default setting for HDR is ON; this will allow you to enjoy the full effects of HDR (High Dynamic Range).
[Image: Picture settings screen showing various sliders and options like Backlight, Brightness, Contrast, Saturation, HUE, Sharpness, Gamma, Color Temperature, Advanced Video, Color Tuner.]
Sound Settings Menu
To access SOUND SETTINGS menu:
- Select SETTING icon (6) via the HOME screen.
- Select "Device Preferences".
- Then go down and select "SOUND".
Sound Style: Options to choose from - Standard, Vivid, Sports, Movie, Music, News, User.
Speakers: TV Speakers or External Speaker (This will force the TV to output sound through the chosen option).
Digital Output: Auto, Bypass, PCM, Dolby Digital Plus, Dolby Digital. (It is recommended to select AUTO, as this will automatically detect quality of sound being produced by content).
[Image: Sound settings screen showing Sound Style, Balance, Bass, Treble, Sound Surround, Equalizer Detail, Speakers, Digital Output options.]
Home Screen (Settings)
To access HOME SCREEN menu:
- Select SETTING icon (#6 on page 20) via the HOME screen.
- Select "Device Preferences".
- Then go down and select "HOME SCREEN".
[Image: Home screen settings menu showing Channels, Customize channels, Enable video previews, Enable audio previews, Apps, Reorder apps, Reorder games, Open source licenses, Android TV Home, Android TV Core Services.]
Screen Saver
To access SCREEN SAVER menu:
- Select SETTING icon (#6 on page 20) via the HOME screen.
- Select "Device Preferences".
- Then go down and select "SCREENSAVER".
[Image: Screen saver settings menu showing Screen saver options like Backdrop, When to start, Put device to sleep, Start now.]
Google Assistant (Settings)
To access GOOGLE ASSISTANT menu:
- Select SETTING icon (#6 on page 20) via the HOME screen.
- Select "Device Preferences".
- Then go down and select "GOOGLE ASSISTANT".
Accounts will only be accessible if you have connected a Gmail account via the "Google Play Store". A Gmail account is needed in order to download and install applications via the "Google Play Store".
[Image: Google Assistant settings menu showing Accounts, View permissions, Searchable apps, SafeSearch filter, Block offensive words, Open source licenses.]
Parental Control
To access PARENTAL CONTROL menu:
- Select SETTING icon (#6 on page 20) via the HOME screen.
- Select "Device Preferences".
- Then go down and select "CHANNEL".
- Select "Parental Control".
From here you have the option to select and create a new password to lock the channels you want to lock.
Note: Please make sure to store/save password somewhere you can access at a later date. Forgetting password, you may need to factory reset TV to use again.
- Channels Blocked: Block specific channels to restrict use.
- Program Restrictions: You can restrict specific programs on a TV channel to be blocked.
- Inputs Blocked: Block a TV port input to restrict use.
- Change PIN: Change existing PIN selected when first entering this menu.
[Image: Parental Control menu showing Channel, Auto Channel Update, Parental Controls, Audio Channel, Open Source Licenses, Version.]
PVR (Personal Video Recorder)
To access RECORDING menu (PVR):
- While watching Live TV, press "MENU" on remote control.
- "TV Options" will appear. Press "DOWN" arrow on remote control to go to "RECORD" menu (as image shown below).
IMPORTANT - You must have a USB Drive inserted into the USB Port of the TV in order to use any of these "RECORD" functions. (Must be FAT32 format)
- Start Recording: Select "Start Recording" to start recording the channel you are currently viewing on Live TV.
- Record List: Select "Record List" to view all previous recordings.
- Device Info: Select "Device Info" to view information about your storage device.
- Schedule List: Select "Schedule List" to see future programs you have scheduled to record.
- Time Shift Mode: Select "Time Shift Mode" and switch on to enable Pause/rewind/play of Live TV.
[Image: PVR menu showing options like Channels, TV options, Record, Start Recording, Record List, Device Info, Schedule List, Time Shift Mode.]
FAQs
General Problems with TV Set
Symptoms | Items to Check and Actions to Follow |
---|---|
"Ghost" or double image | This may be caused by obstruction to the antenna due to high rise buildings or hills. Using a highly directional antenna may improve the picture. |
No power | Check if the TV's AC power cord is plugged into the outlet. Unplug the TV, wait for 60 seconds. Then reinsert plug into the outlet and turn on the TV again. |
No picture | Check antenna connections at the rear of the TV to see if it is properly connected to the TV. Possible broadcast station trouble. Try another channel. Adjust the contrast and brightness settings. Check the Closed Captions control. Some TEXT modes could block the screen. |
Good picture but no sound | Increase the volume level by pressing the VOL+ button on the remote control or on the TV side control panel. Press the MUTE button on the remote control to ensure mute is off. |
Good sound but poor color | Adjust the contrast, color, and brightness settings. |
Poor picture | Poor picture quality may occur when an activated S-VHS camera or camcorder is connected to your TV and other peripherals at the same time. Switch off one of the peripherals. |
Snowy picture and noise | Check the antenna connection. This may be caused by electrical interference (e.g. hair dryer, nearby neon lights, etc.). Turn off the equipment. |
Horizontal dotted line | [No specific cause or action listed, implies it might be a hardware issue or not covered.] |
Television not responding to remote control | Check whether the batteries are working. Replace if necessary. Clean the remote control sensor lens on the TV. You can still use the buttons on the side of your TV. |
Pixels (dots) that are always dark or always lit | Your TV is precision-manufactured using an extremely high level of technology. However, sometimes pixels may not display correctly. These types of occurrences are inherent to this type of product and do not constitute a defective product. |
Turn Off Subtitles on Live TV?
To turn off subtitles on your Android TV, while watching Live TV:
- Press "MENU" [Menu Icon] on your Remote Control.
- Go right and select ADVANCED SETTINGS.
- Go down and select SUBTITLE.
- Switch all choices of subtitles to OFF.
Once all options for subtitle are switched off, then you can exit and continue watching Live TV!
If the Subtitle persists to appear, you may need a software update or for further assistance please contact our customer support centre at info@ayonz.com
My Remote Control Isn't Pairing with My Android TV?
If your remote control is not pairing or becomes disconnected, please make sure to go on the Smart home of your Android TV:
- Press SETTINGS Icon [Gear Icon].
- Select "REMOTES & ACCESSORIES".
- Select "ADD ACCESSORY".
- Follow the on-screen instructions to pair your remote. Once you detect your Bluetooth Remote control, Press OK on remote control to select it and pair.
If it doesn't connect, try the process again until it pairs, otherwise contact our call centre: info@ayonz.com
NOTE: You can still use your Remote control without pairing, only cannot use the "GOOGLE ASSISTANT" Feature until paired.
Android TV Remote Control - App
If you want to control your TV via your Smart device. Search for: "ANDROID TV REMOTE CONTROL" app and download. Once following prompts to connect your Smart device to your Android TV, you will then be able to have 100% control of your TV from your smartphone with the Google Assistant feature enabled.
Specifications
Specification | Details | |
---|---|---|
Operating System | Android TV 9.0 | |
HDR (High Dynamic Range) | Yes | |
Resolution | 3840 x 2160 | |
Display Colours | 1.07 Billion | |
Contrast ratio | 4000:1 | |
Aspect Ratio | 16 : 9 | |
Refresh Rate | 60Hz | |
ETHERNET / WiFi | Yes/ 802.11 b/g/n/ac | |
Multimedia Playback Format under USB Mode | Movie: MPEG, TS, TRP, TP, MP4, MOV, 3GPP, 3GP, AVI, MKV, ASF, DIVX, FLV, SWF, RM, WEBM Music: MPEG1, MPEG2, VORBIS, LPCM, FLAC, DTS LBR, DTS XLL, DRA, Photo: JPEG, PNG, BMP, MPO, GIF |
|
Power Source | 100-240V 50/60Hz | |
Power Consumption | 220W | |
USB | 5V --- max. 500mA | |
Dimensions | With stand: 1563 × 317 × 974 mm (w x d x h) Without stand: 1563 × 69 × 899 mm (w x d x h) |
|
Weight | Net: 20.5 kg Gross: 29.5 kg |
|
Accessories | 1 x Instruction Manual 1 x Remote Control 1 x Warranty Card |
2 x AAA Batteries 2 x TV Stands with Screws |
Customer Support
CUSTOMER SUPPORT: info@ayonz.com
DISTRIBUTED BY: Ayonz Pty Ltd