Maytag MDG52 Complete Dryer Assembly

Complete Dryer Assembly

This section details the components of the complete dryer assembly. The diagram shows various parts labeled with numbers corresponding to the list below.

Illus. No.	Part No.	Qty.	Description
1	822363	1	2-Piece Back Guard Assembly (gas and electric)
	320674	1	Top Back Guard (gas and electric)
	323372	1	Bottom Back Guard
2	815081	1	Tall Left Side Panel Assembly
	815082	1	Tall Right-Hand Side Panel Assembly
3	815077	1	Top Panel Assembly
4	153064	2	1/4-20 x 1/2" Socket Cap Screw
5	153072	2	1/4" High Collar Lock Washer
6	185426	1	Dual Screw Backup Washer
7	153048	2	Inner Friction Pad
8	354217	1	3/4" Plate Spacer
	185240	1	Extended Tumbler Shaft
9	851530	2	Rear Wheel Bracket Assembly
			(refer to Complete Tumbler Wheel Assembly on page 14)
10	131819	1	DPDT Reversing Relay 120
11	851374	1	Galvanized Tumbler Assembly
	851557	1	Stainless Steel Tumbler Assembly
	115909	1	Rear Tumbler Felt
	115911	1	Front Tumbler Felt
12	102415	1	15 Rib Drive Belt
13	887256	1	Non-Coin Front Support Panel with Auto (black)
	887257	1	Coin Front Support Panel (black)
14	881351*	1	Main Door Assembly with Handle (painted)
	851532	1	Main Door Assembly with Handle (stainless steel)
	103067	3	Door Hinge
15	185183*	1	Main Door Handle
	185182	2	Standoff for Door Handle
16	818370	1	Rotation Sensor
17	851384	1	Coin Vault
	819286	1	Coin Vault Jumper Harness
18	125916	1	Coin Box with 2 Keys (each lock keyed different)
19	154059	4	U-Nut Retainer
20	154364	4	#10-16 x 1/2" Phillips Truss Head Screw
21	851529	2	Front Wheel Bracket Assembly
			(refer to Complete Tumbler Wheel Assembly on page 14)
22	102397	1	Door Gasket
23	819365	1	Moisture Sensor

Microprocessor Control Panel Assembly

This section details the components of the microprocessor control panel assembly.

Illus. No.	Part No.	Qty.	Description
1	828423	1	Phase 8 Coin Control Panel Assembly Complete
	851518	1	Phase 8 Non-Coin Control Panel Assembly Complete
	828379	1	Phase 8 Coin Control Panel (panel Only)
	851517	1	Phase 8 Non-Coin Control Panel (panel Only)
2	814515*	1	Toe Panel (painted)
	814584	1	Toe Panel (stainless steel)
3	160070	1	XX4451 Lock Assembly
	160169	2	ZB7 Key
4	112605	1	3 Button Membrane Switch (coin Only)
	112586	1	Non-Coin Keypad
5	818213	1	25¢ Coin Acceptor Assembly with Optic Switch
	887041	1	Optic Switch ONLY (for 25¢ coin acceptor)
6	819508	1	Control Mount Assembly
7	887092	1	Phase 8 Microprocessor without Fire Suppression System (non-coin Only)
	887093	1	Phase 8 Microprocessor with Fire Suppression System (non-coin Only)
	884479	1	Phase 8 Coin Microprocessor (coin Only)
	819541	1	Coin Block Jumper Harness (non-coin Only)
	136116	1	3-Amp Fuse
	136056	1	20-Amp Fuse
8	350250	1	Computer Board Cover
9	150331	2	#8-18 x 1/2" TORX® Screw
10	121530	2	Panel Support Cable (for coin models)
	350303	2	Panel Support Bracket (for non-coin models)
11	819196	1	Main Door Switch Assembly
	813411	1	Door Switch Extension Harness
12	154059	4	#10-16 x 1/2" Phillips Truss Head Screw
13	154364	4	Tinnerman U-Nut Retainer

Complete Rear Tumbler Support Panel Assembly

This section details the components of the complete rear tumbler support panel assembly.

Illus. No.	Part No.	Qty.	Description
1	150331	22	#8-18 x 1/2" Pan Head TORX® Screw
2	152014	13	1/4-20 Serrated Hex Flange Nut
3	851258	1	Axial Probe Assembly
4	318691	1	Cover Plate for Models without S.A.F.E.
5	828238	1	Linkageless Sail Switch Assembly
6	152111	3	#10-32 Hex Body Rivnut
7	825961	1	Rear Tumbler Support Panel Complete (gas and electric)
			(includes illus. nos. 1 through 17)
8	822358	1	Rear Tumbler Support Panel Only
9	121010	2	L70 14-4 Terminal Lug
10	851262	1	Heat Duct
11	153021	2	1/4" Star Washer
12	183112	1	205° Gas Hi-Limit Thermostat
13	154200	2	5/32" Pop Rivet
14	152002	1	1/4-20 Hex Nut
15	185156	1	Rear Bulkhead with Mounting Holes
16	851530	2	3-1/2" Wheel Bracket with 2 Shims Assembly
17	350228	1	Thrust Bearing Box
	350238	1	Electric Box Cover Plate
18	319579	1	Rear Electric Box
19	315343	1	Deep Rear Tumbler Support Top Flange

Complete Lint Box and Lint Drawer Assembly

This section details the components of the complete lint box and lint drawer assembly.

Illus. No.	Part No.	Qty.	Description
1	834719	1	Large Lint Box Assembly Complete
	335058	1	Large Lint Box
2	130119	1	190° Thermostat
3	154200	9	#5-32 Pop Rivet
4	185215	1	Lint Drawer Rail Right Side
5	185216	1	Lint Drawer Rail Left Side
6	819523	1	Lint Drawer Switch Assembly
	122002	1	Lint Drawer Switch ONLY
7	834720	1	Lint Box Top Assembly
8	102004	1	0.75 Round Magnet
9	153564	2	#8-32 x 0.375 Clinch Stud
10	153073	2	#8-32 Keps Nut
11	117605	2	1/4" x 3/8" Sponge Tape (sold by the foot)
12	117604	1	1/8" x 3/8" Sponge Tape (sold by the foot)
13	150331	13	#8-18 x 0.5 TORX® Screw
14	150300	7	#10-16 x 0.75 Hex Washer
15	170171	1	Lint Drawer Brush
16	150331	4	#8-18 x 0.5 TORX® Screw
17	185423	2	Lint Drawer Stop
18	828429	1	Lint Drawer Assembly Complete (painted)
19	851536	4	Lint Drawer Clinch Nut Plate
20	185148*	1	Lint Drawer Handle (painted)
21	836028	1	Exhaust Temperature Probe
22	828429	1	Lint Handle Black with Graphics
23	333693	1	Handle Cup
24	150334	2	#8-16 x 5/8" Pan Head Plastic Screw

Totally Enclosed, Fan-Cooled Motor Mount Assembly

This section details the components of the totally enclosed, fan-cooled motor mount assembly.

Illus. No.	Part No.	Qty.	Description
1	834723	1	Large Blower Motor Assembly Complete (60 Hz)
	100069	1	3/4 hp Blower Motor (60 Hz)
2	117604	2	1/8" x 3/8" Sponge Tape (sold by the foot)
3	154000	5	5/16-18 Tinnerman Clip
4	153002	4	5/16" Lock Washer
5	153001	4	5/16" Flat Washer
6	834724	1	Large Motor Mount
7	822364	1	16" Riveted Impellor (1/2" Bore)
8	150501	4	5/16-18 x 3/4" Hex Bolt
9	100702	1	1/8" x 1/8" x 1-1/2" Key
10	153050	2	1/2" S.A.F.E. Flat Washer
11	152006	2	1/2-20 Left-Hand Jam Nut

Natural Gas 60 Hz Burner Assembly

This section details the components of the natural gas 60 Hz burner assembly.

Illus. No.	Part No.	Qty.	Description
1*	140880		#44 Orifice Liquid Propane
	140905	2	Liquid Propane Conversion Kit
2	887296	1	3/8" Close Nipple Black Iron
	183137	2	U-Bolt with Nuts for 1/2" Black Pipe
3	154355	1	1/2" x 31-3/4" Black Pipe
4	143351	1	Rear Gas Pipe Support
5	350226	1	Burner Funnel Transition Assembly
6	851387	1	5/32" Pop Rivet
7	154200	14	Radiant Heat Sensor
8	130500	2	Burner Funnel Top Lip Bracket
9	350217	1	Hot Surface Ignitor
10	128910	2	60 Hz Natural Gas Dual Burner Assembly
	815116	1	60 Hz Liquid Propane Gas Dual Burner Assembly
	884372	1	Round Gas Burner Funnel ONLY
11	350219	2	1/4-20 Free Spin Nut
12	152014	4	Round Gas Burner Support Bracket
13	350221	1	Dual Round Gas Burner Support Bracket
14	150331	19	#8-18 x 1/2" Pan Head TORX® Screw
15	350253	1	Front Gas Pipe Bracket
16	141321	1	Gas Shutoff Assembly
17	142820	1	1/2" x 1/2" x 1/2" Black Iron Tee
18	142703	1	1/2" x 4" Black Iron Pipe
19	142500	1	1/2-90° Elbow
20	142953	2	3/8" x 1/2" Steel Bushing
21	128944	2	25M Gas Valve 120 VAC 60 Hz
22	350220	1	Dual Gas Valve Bracket
23	183144	2	In-Shot Tube
24	185063	2	Ignitor Bracket
25	183145	2	Hot Surface Ignitor Mounting Screw

Complete Drive Motor Assembly

This section details the components of the complete drive motor assembly.

Illus. No.	Part No.	Qty.	Description
1	350301	1	Motor Mount Base Plate
2	851570	1	Drive Motor Assembly Complete (60 Hz)
	884303	1	Drive Motor with Sheave (60 Hz)
3	150609	1	1/2-13 x 4-1/2" Tap Bolt
4	152004	2	5/16-18 Hex Nut
5	154266	2	3/8" x 3/8" Shoulder Screw
6	150501	4	5/16-18 x 3/4" Tap Bolt Hex Head
7	152014	5	1/4-20 Free Spin Wash Nut
8	153001	4	5/16" Flat Washer
9	153002	6	5/16" Split Lock Washer
10	153033	2	1/2" x 1-3/8" Flat Washer
11	154321	1	5/16-24 x 3/8" Alan Setscrew
12	152011	3	1/2-13 Hex Nut
13	153018	2	1/4" Flat Washer
14	185420	1	60 Hz Motor Sheave
15	851543	1	Motor Platform Assembly

S.A.F.E. Assembly

This section details the components of the S.A.F.E. assembly.

Illus. No.	Part No.	Qty.	Description
1	143581	1	3 GPM 3/8" N.P.T. Spray Nozzle
2	143303	1	3/8" N.P.T. Brass Lock Nut
3	136987	1	Water Jet Pressure Switch
4	143155	1	3/8" Brass Street Elbow
5	143025	1	3/4-11 NH x 3/8" N.P.T. Nylon Hose Adapter
6	143310	1	3/8" Brass 90° Elbow
7	143251	1	3/8" M.P.T. Brass Plug
8	143241	1	3/8" x Close Brass Nipple
9	143220	1	3/8" F.P.T. Brass Tee
10	319231	1	Water Valve Bracket
11	154338	2	M4 x 6mm Phillips Head Slotted Machine Screw
12	143242	1	3/8" x 2-1/2" Brass Nipple
13	318422	1	Spray Nozzle Bracket
14	150331	4	#8-18 x 1/2" Pan Head TORX® Screw
15	143182	1	3/4" GHT x 1/8" x 3/8" N.P.T. Brass Tee
16	143183	1	7/16-20 x 3/8" N.P.T. Brass Adapter
17	165120	1	Water Inlet Valve 24VDC
18	143323	1	3/8" x 3" Brass Nipple
	114110	1	S.A.F.E. Water Supply Warning Tag

Complete Tumbler Wheel Assembly

This section details the components of the complete tumbler wheel assembly.

Illus. No.	Part No.	Qty.	Description
1	154264	1	10 M8 x 25mm Shoulder Bolt
2	152014	3	1/4-20 Free Spin Wash Nut
3	154284	1	Tumbler Wheel Spacer
4	180060	1	3-1/2" Tumbler Support Wheel
5	153557	3	1/4-20 x 3/4" Self-Clinching Stud
6	154013	1	M8 Hex Nut
7	153002	1	5/16" Lock Washer
8	350196	1	1/2" Wheel Bracket
	851529	1	Front Wheel Assembly Complete
	851530	1	Rear Wheel Assembly Complete
	350198	2	Rear Wheel Bracket Shim
			Duplicate all parts for rear wheel assembly.

Google Docs
Google Drive
Download [pdf]

File Info : application/pdf, 13 Pages, 1,013.38KB

MDG52 Acrobat Distiller 5.0 (Windows)

Related Documents

	Maytag MDE20PDUGW & MDE20MNUGW: 20 AMP Single-Load Top-Load Commercial Dryers Discover the features, specifications, and dimensions of Maytag's 20 AMP Single-Load Top-Load Commercial Dryers, models MDE20PDUGW and MDE20MNUGW. Built for durability and performance with Turbovent system and large capacity.
	Maytag MED6500 Series Electric Dryer Parts List and Diagrams Comprehensive parts list and diagrams for Maytag MED6500MW0 (White) and MED6500MBK0 (Volcano Black) electric dryers. Includes top, console, cabinet, and bulkhead components, as well as optional accessories.
	Maytag Commercial Dryer Installation Instructions Comprehensive installation guide for Maytag Commercial Gas or Electric Dryers, models MDE20PDFGW and MDG20PDFGW. Covers safety, specifications, dimensions, electrical and gas requirements, venting, and maintenance.
	Maytag Commercial Dryer Installation Instructions Comprehensive installation guide for Maytag commercial gas and electric dryers, covering safety, tools, parts, dimensions, clearances, electrical requirements, gas supply, and venting.
	Maytag MEDP586KW, MGDP586KW Single-Load Electric/Gas Dryer - Specifications and Features Detailed specifications and features for the Maytag MEDP586KW and MGDP586KW commercial-grade residential single-load electric and gas dryers. Learn about capacity, dimensions, performance, and warranty.
	Maytag MED6630HW1 Electric Dryer Parts List and Diagrams Comprehensive parts list and visual diagrams for the Maytag MED6630HW1 electric dryer. This document details components for the top, console, cabinet, bulkhead, and door assemblies, along with optional parts and accessories. Essential for Maytag dryer repair and maintenance.
	Maytag Commercial Stacked Washer/Dryer Installation Instructions Official installation manual for Maytag Commercial Stacked Washer/Dryer units, including models like MLE22PDAGW0 and MLG22PDAGW0. This guide covers critical safety information, detailed installation steps for gas and electric models, electrical and gas supply requirements, venting, dimensions, parts lists, and setup procedures for commercial laundry operations.
	Maytag 27" Electric Dryer Installation Guide and Instructions Comprehensive installation guide for Maytag 27-inch wide electric dryers, covering safety, electrical requirements, venting, and troubleshooting for U.S.A. installations. Includes detailed steps for electrical connections and venting.