Aldes EasyVEC® MICRO-WATT + 10000 IP IHM CIRC DTE Isolé
Product Reference: 11034099
The EasyVEC® range offers the most thoughtfully designed single-flow extraction units for high-performance, serene, and easy ventilation.
Product Overview
The EasyVEC® Micro-watt + unit provides single-flow ventilation for tertiary premises, used for extraction or air supply to ensure adequate air quality and building preservation.
The patented Aldes Micro-watt + regulation system automatically creates a custom regulation profile (Auto-Adaptative Technology™) to adjust the pressure delivered by the unit to the actual installation needs. This allows for ventilation precisely when and where needed, leading to significant savings on heating costs.
With AldesConnect® Pro, it is possible to remotely monitor the ventilation unit for enhanced responsiveness in managing breakdowns and malfunctions.
Key Features:
- Micro-watt + regulation and patented Aldes Auto-Adaptative Technology™ to adapt delivered pressure to installation needs.
- Three additional regulation modes: MICRO-WATT in constant pressure, via external 0-10V sensor (e.g., CO2 sensor), and constant flow.
- Very low consumption EC motor (50/60 Hz).
- Reaction impeller.
- Galvanized steel casing (Z275).
- Simple and intuitive EasyVEC® remote control.
- Proximity switch included.
- Pre-configured hygro-adjustable or T.Flow regulation modes.
- Compatible with all types of networks, including those with branches.
- Centralized system for maintenance savings.
- Alarm forwarding available via wiring to the electronic board.
- Numerous options and accessories available.
- Manufactured in France.
Product Benefits:
- Wide range from 4000 to 12,000 m³/h.
- Up to 50% lower electricity consumption compared to a standard unit.
- 100% recyclable.
- Easy selection using Selector PoWair and Conceptor Ventilation software.
- Easy parameterization via its intuitive interface.
- Easy maintenance: downloadable documentation via QR code, unique access panel, compatible with AldesConnect™ Pro supervision service (optional).
- Very low energy consumption.
Technical Specifications
Dimensional Data:
| Reference | E (mm) | F (mm) | H (mm) | L (mm) | M (mm) | P (mm) | T (mm) | Y (mm) | Z (mm) | Ø (mm) |
|---|---|---|---|---|---|---|---|---|---|---|
| 11034099 | 575 | 1155 | 905 | 910 | 60 | 945 | 960 | 940 | 115 | 710 |
Electrical Data:
| Reference | Maximum Power (kW) | Maximum Power (W) | Protection Rating | Maximum Current (A) | Electrical Supply |
|---|---|---|---|---|---|
| 11034099 | 2.2 | 2200 | IP24 | 15.7 | Monophasé |
Aerodynamic Data:
Nominal Flow Rate: 10000 m³/h
Aerodynamic Curves:
The aerodynamic curves illustrate the performance of the EasyVEC® Micro-watt + unit. They are established according to the NF EN ISO 5801 standard.
Key:
- Pfs = Static pressure
- P(Pa) = Static pressure
- P(W) = Consumed power
[Graph showing static pressure vs. flow rate for different RPMs and modes]
[Graph showing consumed power vs. flow rate for different RPMs and modes]
Applications
New construction, renovation, tertiary premises.
Installation:
- On an anti-vibration slab according to DTU 68.3 recommendations.
- Outdoor or indoor placement.
- Sufficient space must be provided in front of the unit for easy access to internal components for maintenance.
- Preferably sheltered from wind to limit pressure losses on discharge, especially for rooftop installations.
- For optimal acoustic and aerodynamic performance, it is recommended to:
- Install silencers at the unit's connection points.
- Use the ALDES VIRTUO-FIX accessory range with seals.
- Use MS PRO airtight flexible connectors to decouple network vibrations.
Reference Argument:
- Application: Centralized single-flow extraction or supply fan, very low consumption for tertiary VMC systems, new and renovation, supply/extraction, Micro-Watt+ Aldes Auto-Adaptive Technology™ in regulated pressure, attics/technical rooms/flat roofs, indoor/outdoor.
- Description: Very low consumption extraction unit EasyVEC® Micro-Watt +, easy to select, easy to parameterize, easy to maintain, very low consumption.
Complementary Characteristics
- Compatible with Ventilation Technical Approval for modulated Presence-Agito-CO2-Hygro n° 14.5/16-2185_V1.
- ErP 2018 compliant.
- Eligible for CEE: BAT-TH-112, BAT-TH-125, BAT-EQ-123.
Accessories
| Designation | Reference |
|---|---|
| Circuit breaker 11-16 A | 11057056 |
| Duct probe +25/+90°C | 11090900 |
| Flow control kit (20-300 Pa) | 11090901 |
| Duct probe -10/+35°C | 11090902 |
| Female rain shield + grille Ø 710 mm | 11056410 |
| OCTA D710 + seal | 11094647 |
| MS PRO V2 D710 | 11094663 |
Consumables
| Designation | Reference |
|---|---|
| G4 Filter EasyVEC® 10000/12000 | 11034411 |
| M5 Filter EasyVEC® 10000/12000 | 11034414 |
| F7 Filter EasyVEC® 10000/12000 | 11034425 |
| F9 Filter EasyVEC® 10000/12000 | 11034428 |
Associated Services
Commissioning
General Data
| Reference | Motor Type |
|---|---|
| 11034099 | EC |
Regulations and Compliance
Technical Opinion No.: 14.5/16-2185_V2
