User Manual for BayNexus models including: BN-HH-G, BNHHG, 2ABHWBN-HH-G, 2ABHWBNHHG, BN-HH-G Smart Terminal, Smart Terminal
BayNexus Inc BN-HH-G Smart terminal 2ABHWBN-HH-G 2ABHWBNHHG bn hh g
BayNexus BN-HH-G User Manual Welcome BN-HH-G series wireless data terminal is a high-performance intelligent mobile handheld terminal device developed, designed and produced by BayNexus. It adopts a special mobile medical operating system with safe and reliable performance, supports RFID electronic tag reading. Device Description Top View Power Light Camera Display Back View RFID Speaker Side View Volumn Key Light Key Scan Key Power Key Scan Key Charge/Data transmission Data transmission and charge Connect one end of the USB data cable terminal to the device; Connect the other end of the USB cable to the computer to transmission data and charge Seater Charger Connect the power adapter, USB data cable and seater charger together; Connect the power adapter to the power supply; Put the device into the seater charger in the correct way and start charging. Standby / wake-up Device Power On 1. Press the device power key for more than 2 seconds and release it to start the machine Standby and Wake-up Device 1. When the device is on, press the power key and release it to enter the standby state 2. When the terminal is in standby, press the power key and release it to wake up the device. Reboot Device When the device needs to be restarted, long press the power key and release it (more than 2 seconds), click the "restart" software key on the screen, and the terminal can be restarted. Power Off When the terminal needs to be shut down, long press the power key and release it (more than 2 seconds), and click the "shut down" software key on the screen to shut down the terminal. Charge Lamp Lamp of Charge State Green Battery full or near full Orange During charging, the power is higher than 15% During charging, the power is less Red than 15% Use RFID Reading RFID reading distance is in the range of 0-200cm, which can separate objects and quickly identify electronic tags. 1. Enter the application software interface, set the key and customize the scanning key function; 2. Align the RFID identification area on the back of the wireless data terminal with the RFID electronic tag; 3. Press the scan key to read RFID electronic tag information; 4. When reading, adjust the distance between the wireless data terminal and the electronic tag to achieve the best reading effect; 5. After reading the electronic tag information, the terminal sends a prompt tone and displays the RFID electronic tag information on the application interface. Warranty scope The warranty period of this product is 12 months from the date of purchase. During the product warranty period, for any fault caused by the quality of the product itself, please contact the manufacturer with the purchase certificate to enjoy the free warranty. There is no free warranty under the following circumstances: Damage caused by self disassembly; Faults and man-made mechanical damage caused by water ingress or falling; Failure or damage caused by force majeure.Microsoft Word 2010