Dell Mobile Wireless Mouse MS3320W

Getting Started

This guide provides instructions for setting up your Dell Mobile Wireless Mouse MS3320W.

1. Battery Installation

Follow these steps to install the batteries:

• Open the battery compartment cover on the underside of the mouse.
• Insert one AA battery, ensuring the positive (+) and negative (-) ends are correctly aligned.
• Close the battery compartment cover.

Visual Description: The diagram shows a mouse with its battery compartment open, indicating where to insert an AA battery with correct polarity.

2. Connecting the Mouse

You can connect the mouse using either the USB receiver or Bluetooth.

Option A: Using the USB Receiver

1. Plug the USB receiver into an available USB port on your computer.

2. The mouse should automatically connect and be ready for use.

Visual Description: The diagram shows a USB receiver being plugged into a computer's USB port, followed by an illustration of the mouse connecting.

Option B: Using Bluetooth

1. Press and hold the Bluetooth pairing button on the underside of the mouse for 3 seconds. The LED indicator will start blinking.

2. On your computer, go to Bluetooth settings and search for devices.

3. Select "Dell MS3320W Mouse" from the list of available devices to pair.

Visual Description: The diagram illustrates pressing a button on the mouse, showing a blinking LED, and then selecting the mouse from a computer's Bluetooth device list.

Dell Peripheral Manager

Enhance your mouse experience with the Dell Peripheral Manager software. Download it from:

www.dell.com/support/dpem

Visual Description: A pop-up window for Dell Peripheral Manager is shown, with an arrow indicating to proceed with the download or installation.

Additional Information

For warranty, safety, environmental, and regulatory information, please refer to the documentation available on the Dell website.

Support: www.dell.com/support

Regulatory Compliance: www.dell.com/regulatory_compliance