LG LED Signage Installation Guide

Installation Steps

The following steps outline the assembly and installation process:

1. Step 1: Attach component D (M5 x L8) to the LSAA012-MX, NX model.
2. Step 2: Secure components using screws as indicated in the diagram for LSAA012-MX, NX.
3. Step 3: Continue securing components for LSAA012-MX, NX.
4. Step 4: Attach component F for LSAA012-MX, NX.
5. Step 5: Attach component A (M5 x L6) to the LSAA012-MX, NX, LSAA012-SX, TX, and LSAA012-MX1, NX1 models.
6. Step 6: Mount components B and C (M4 x L7) for LSAA012-MX, NX and LSAA012-MX1, NX1 models.
7. Step 7: Install component E for LSAA012-MX, NX.

Sequential Assembly for LSAA012-MX, NX:

1. Display units are shown in their initial state.
2. Two units are brought together, with one sliding into place.
3. Component G is used to secure the connection between the two units.
4. Further securing of the connection is shown.
5. The units are joined, with one sliding into place.
6. The final assembled display is shown.

Important Safety Information

Warning:

• Ensure that a readily accessible disconnect device is incorporated external to the equipment.
• The maximum rating of an overcurrent protective device to be provided external to the equipment may be one of the protective device ratings available in the country of installation.
• Prepare a power cable of 9 A (16 AWG) or more.

Diagrams on page 8 illustrate improper handling and potential damage to the LED panels, emphasizing the need for careful installation.

Additional Information

For more detailed information, users can visit the LG website and search by model number. The following URLs are provided:

• Worldwide: www.lg.com/id-manual
• Korea: www.lgservice.co.kr

The document is available in multiple languages, including English, Korean, Czech, Danish, Spanish, Finnish, French, German, Greek, Hungarian, Indonesian, Italian, Kazakh, Dutch, Norwegian, Polish, Portuguese, Russian, Slovak, Swedish, Chinese, Turkish, Ukrainian, Uzbek, Japanese, and Arabic.