Forno FFSGS6460-48 Gas Range: Product and Cutout Dimensions
Models: FFSGS6460-48BLK | FFSGS6460-48WHT
Brand: Forno - Alta Qualita
Product Dimensions
The following dimensions describe the Forno FFSGS6460-48 gas range.
- Overall Width: 1218 mm (48 inches)
- Overall Depth: 735 mm (29 inches) at the front, with the main body depth at 695 mm (27 3/8 inches).
- Overall Height: 916 mm (36 inches).
- Cooking Surface Height: 916 mm (36 inches).
- Main Body Depth (excluding controls): 618 mm (24 11/32 inches).
- Rear Panel/Riser Height: 192 mm (7 9/16 inches).
- Control Panel Depth: 46 mm (1 25/32 inches).
- Front Base Height: 43 mm (1 11/16 inches).
Cutout Dimensions and Installation Requirements
This section details the necessary dimensions for installing the Forno FFSGS6460-48 gas range into kitchen cabinetry and countertops.
Countertop Installation:
- Required Countertop Width: 1200 mm (48 inches).
- Side Clearances (within countertop): 25 mm (1 inch) on each side.
Cabinetry and Enclosure:
- Cabinet Opening Width: 1218 mm (48 inches).
- Cabinet Opening Height (Countertop to cabinet top): 760 mm (30 inches).
- Cabinet Enclosure Depth: Must accommodate the appliance depth of 618 mm (24 11/32 inches).
- Backsplash Area: 457 mm (18 inches) is indicated.
Installation Clearances and Utilities:
- Clearance from Rear Wall: 242 mm (7 1/2 inches).
- Clearance from Front Countertop Edge: 77 mm (3 inches).
- Utility Connection Position: Located 1169 mm (46 inches) from the left side and 25 mm (1 inch) from the right side of the appliance's width.