Dahua VTO2101E-P-S1 IP Villa Outdoor Station
Key Features
- HD CMOS camera
- Zinc alloy panel, IP65, IK10 rated
- ICR Night vision & Voice indication
- Video & Audio messaging
- TCP/IP, SIP support
- Surface mounted
- IP65 rating (Note: Apply silica gel to gaps between the device and the wall. Liquid sodium silicate is recommended. Refer to the quick start guide for details.)
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | VTO2101E-P-S1 |
| System | |
| Main Processor | Embedded Micro Processor |
| Operation System | Embedded LINUX OS |
| Camera | |
| Image Sensor | 1/2.7" 2MP CMOS |
| Focal Length | 2.8mm |
| Angle of View | H:77°, V:55°, D:100° |
| Angle of View adjustment | Horizontal: -45° to +45° |
| Video | |
| Video Compression | H.264 |
| Video Streaming | Dual Stream |
| Day/Night | Auto(ICR), 5m |
| BLC Mode | WDR |
| White Balance | Auto/Natural/Street Lamp/Outdoor/Manual |
| Gain Control | Auto/Manual |
| OSD | Support |
| Audio | |
| Audio Compression | G.711 |
| Audio Input | Omnidirectional Mic |
| Audio Output | Built-in Speaker |
| Bidirectional Talk | Support Dual-way Bidirectional talk |
| Audio processing | Noise suppression, Echo cancellation |
| Operation Mode | |
| Keypad | 1 Mechanical Button |
| Interface | |
| Door Control | 1 |
| Alarm In | 1 |
| RS485 | 1 |
| Network | |
| Ethernet | 10M/100Mbps Self-adaptive |
| Network Protocol | TCP/IP, SIP |
| General | |
| Ingress Protection | IK10, IP65 (Apply silica gel to gaps between the device and the wall. Liquid sodium silicate is recommended. For details, see the quick start guide.) |
| Tamper Switch | 1 |
| Tamper Screw | Support |
| Installation | Surface |
| Material | Front Panel: Zinc alloy, Rear Panel: Aluminum alloy, Holder: Aluminum alloy |
| Power | |
| Power Consumption | Standby ≤2.5W, Work ≤7W |
| Working Temperature | -30°C to +60°C |
| Relative Humidity | 10%RH to 90%RH |
| Dimensions | 163.0mm × 73.0mm × 54.5mm |
| Weight | 0.8kg |
Dimensions
The outdoor station has a main unit with dimensions of 163.0mm in height, 73.0mm in width, and 54.5mm in depth. The front panel is made of zinc alloy, the rear panel of aluminum alloy, and the holder is also aluminum alloy.
View Area: The device is designed for optimal viewing within a range. The recommended installation height is around 1.6 meters. The horizontal viewing angle is 77°, the vertical is 55°, and the diagonal is 100°.
Application Scenarios
Application 1: Basic Setup
This setup involves the outdoor station (VTO), one or two door locks, and a power source. It can connect to a network via Wi-Fi or Ethernet, allowing remote access and control through the DMSS mobile application.
Application 2: Expanded System
This configuration includes the outdoor station (VTO), one or two door locks, an IP camera (IPC), a PoE switch for power and network distribution, and indoor monitors (Main VTH and Extension VTH4). A router connects the system to the internet, enabling DMSS access. A PIR sensor can also be integrated for additional security.
