Woodworking Tools Designed and Made in USA | Woodpeckers
P65Warnings.ca.gov
Instruction Manual for Woodpeckers models including: Multi Router Machine Stand, Multi, Router Machine Stand, Machine Stand
13 hours ago — From the outside, install 5/16"-18 x 3/4". Carriage Bolts through all holes. Place an 5/16". USS Washer and 5/16"-18 Hex Nut on each.
File Info : application/pdf, 2 Pages, 104.52KB
DocumentDocumentWoodpeckers9 DCBA MULTI-ROUTER MACHINE STAND O W N E R 'S M A N UA L DIAGRAM (QTY) PART NAME A (4) Leg B (2) Short Top Stretcher C (2) Long Top Stretcher D (2) Short Bottom Stretcher E (2) Long Bottom Stretcher HARDWARE BAG (32) Carriage Bolt 5/16"-18x3/4" (32) Washer 5/16" USS (32) HexNut5/16"-18 (4) Hex Head Bolt 1/2"-13x 2-1/2" (8) Washer 1/2" USS Washer (4) Lockwasher 1/2" (4) HexNut1/2"-13 If you think you're missing anything, email us at mailroom@woodpeck.com. You can also call us at 800-752-0725 from 9:00 a.m. to 5:00 p.m. EST Monday - Friday. 1. Align the Legs a(And) Stretchers a(Bs ,C,D,E) shown, the Legs will be on the outside of the assembly. The Short Stretchers overlap the Long Stretchers on both the top and bottom sets. Figure A. 2. From the outside, install 5/16"-18 x 3/4" Carriage Bolts through all holes. Place an 5/16" USS Washer and 5/16"-18 Hex Nut on each Carriage Bolt, finger tight only. Figure B. 3. Place the Multi-Router on the Machine Stand and from the top attach with the 1/2"-13 x 2-1/2" Hex Head Bolts and USS Washer 1/2". On the under-side, use a USS Washer and a 1/2" Lock Washer, secure with 1/2"-13 Hex Nut. Figure C. 4. Adjust Legs so that they are even and flat on the ground. Tighten the Nuts on all Leg/Stretcher joints. Woodpeckers® PRECISION WOODWORKING TOOLS REV031122 Woodpeckers, LLC Strongsville, Ohio · Woodpeck.Com © 2022 Woodpeckers, LLC WARNING! This product can expose you to chemicals, including chromium, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov