Xclea Cordless Vacuum Cleaner Operation Manual
Please read this manual carefully before use and keep it for future reference. Product images are for reference only; the actual product may vary.
1. Applicable Operating Manual
The latest version of the operating manual can be downloaded from https://www.xclea.com/en/guide.html or by scanning the provided QR code. Please follow the instructions on the website.
2. Symbols Used
- A lightning bolt symbol within a triangle indicates a potential risk of injury, such as electric shock.
- An exclamation mark symbol within a triangle indicates important instructions in this operating manual that must be followed.
- An arrow symbol indicates specific tips and recommendations for operation.
3. Safety Precautions
Read the manual carefully before operation.
IMPORTANT SAFETY PRECAUTIONS
READ ALL INSTRUCTIONS BEFORE USE. When using an electrical appliance, basic precautions, including those listed below, should always be followed. READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE. Failure to follow warnings and instructions may result in electric shock, fire, and/or serious injury.
CAUTION! To reduce the risk of fire, electric shock, or injury, follow these instructions.
CAUTION!
- If the power cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid a hazard.
- Read instructions before charging.
- For indoor use only. Do not expose the unit to rain.
- The charger is intended for charging the battery supplied by the manufacturer.
- Do not use other chargers to charge the battery supplied by the manufacturer, nor attempt to charge other types of batteries with this charger. Do not attempt to charge non-rechargeable batteries with this charger.
- Before charging, check that the mains voltage corresponds to the value indicated on the rating plate.
- The appliance should be in a well-ventilated area during charging.
- Unplug the charger before cleaning or performing maintenance on it.
- The appliance is intended for use only with the power supply unit supplied with the appliance.
- This appliance contains batteries that can only be replaced by qualified personnel.
- The battery must be removed from the appliance before disposal.
- When removing the battery, the appliance must be disconnected from the power supply.
- Children aged 8 years and above, persons with reduced physical, sensory or mental capabilities, or persons lacking experience or knowledge may use this device only if such use is supervised by competent persons or after safety instructions have been provided and the risks associated with operating this device are understood.
- Cleaning and user maintenance shall not be performed by children without supervision.
- Do not allow children to play with the appliance.
- Do not use the appliance outdoors or on wet surfaces.
- Do not allow play with the appliance. Exercise close supervision when the device is used by or near children, pets, or plants.
- Use this device only as described in this manual. Use only manufacturer-recommended attachments.
- Do not use the appliance with a damaged cord or plug. If the device has been dropped, is damaged, left outdoors, or is not working as it should, return it to a service center.
- Do not pull or carry the appliance by the power cord, use the cord as a handle, close a door on the cord, or pull the cord around sharp edges and corners. Keep the cord away from heated surfaces.
- Do not pull the cord to unplug the appliance from the outlet: grasp the plug, not the cord.
- Do not touch the charger, including the plug and terminals, with wet hands.
- Do not insert any objects into openings. Do not use the appliance if any opening is blocked. Keep dust, lint, hair, and other materials from reducing airflow.
- Keep hair, clothing, fingers, and all parts of the body away from openings and moving parts.
- Exercise extra care when cleaning on stairs.
- Do not pick up any flammable or combustible liquids (such as gasoline) with the appliance, nor use it in areas where such liquids may be present.
- Do not pick up anything that is burning or smoking (such as cigarettes, matches, or hot ashes) with the appliance.
- Do not operate the appliance without the dust container and filter in place.
- Prevent unintentional starting. Ensure the switch is in the off-position before connecting the battery pack, picking up or carrying the appliance. Do not carry the appliance with your finger on the switch or energize the switch when it is plugged in, as this may lead to accidents.
- Disconnect the battery pack from the appliance before making any adjustments, changing accessories, or storing the appliance. Such preventive safety measures reduce the risk of starting the appliance accidentally.
- Charge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
- Use the appliance only with specifically designated battery packs. Use of any other battery packs may result in injury and fire.
- When the battery pack is not in use, keep it away from other metal objects, such as paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
- In aggressive conditions, liquid may be ejected from the battery; avoid contact. If contact occurs, flush immediately with water. If liquid contacts eyes, seek additional medical attention. Liquid ejected from the battery may cause irritation or burns.
- Do not use a damaged or modified battery pack or appliance. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion, or risk of injury.
- Do not expose the battery pack or appliance to fire or excessive temperature. Exposure to fire or temperature above 130°C may cause an explosion.
- Follow all charging instructions and do not charge the battery pack or appliance outside the temperature range specified in the instructions. Improper charging or charging at temperatures outside the specified range may damage the battery and increase the risk of fire.
- Servicing should be performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained.
- Do not modify or attempt to repair the appliance or battery pack except as indicated in the instructions for use and care.
- Always turn off this appliance before installing or removing the power brush.
SAVE THESE INSTRUCTIONS
Vacuum cleaners are intended for cleaning dust in residential areas only.
CAUTION!
- To prevent electric shock, short circuit, or fire, ensure the plug is firmly inserted into the outlet.
- Immediately turn off the power and unplug the appliance in case of malfunction, overheating, unusual odor, or sound during charging or operation. Place the unit in an open and fire-safe space. Maintenance should be performed by the manufacturer or a qualified repair person to ensure safety.
- Do not pour water on the appliance or immerse it in water.
- If the brush roller fails, turn off the vacuum cleaner immediately. Check for and clean any accumulated hair or excessively long fibers around the brush roller.
- Do not use the appliance near people who have pacemakers.
- Keep the vacuum cleaner out of reach of children and pets to prevent injuries when storing the appliance on the wall mount.
- When charging with the wall mount, ensure the main unit is securely attached to the wall mount to prevent falls and injuries.
- When charging the main unit, ensure the battery indicator is lit.
- Keep children away from the wall mount. Dropping the appliance during charging may lead to risks such as electric shock due to liquid discharge.
- Do not drop the appliance. Do not subject the appliance to mechanical impact. Do not allow the appliance to strike other objects.
- Clean the dust container promptly to ensure good ventilation and prevent low suction power and engine overheating due to air channel blockage.
- Do not expose the vacuum cleaner to extreme temperatures. The recommended operating and storage temperature is between 0°C and 35°C. Store the appliance in a cool, dry place.
- To prevent water from entering the main unit and causing malfunctions, do not use the vacuum cleaner to suck up water. If water enters the dust container, turn off the vacuum cleaner immediately and empty the dust container. Check if the dust container is completely dry.
- Completely dry the brush roller after washing before reinstalling it.
- Clean the attachments promptly after use to prevent food residues and cotton fibers from rotting in them.
- Use only the brush supplied by the manufacturer to clean the dust container filter. Do not use other steel or stiff brushes.
- To avoid injury, keep the cleaning brush out of reach of children. Use the sharp blade at the end of the cleaning brush to cut away debris that is difficult to clean around the brush roller.
4. Appliance Structure
The appliance consists of a main unit, a metal adjustable handle, and various accessories. The main unit houses the dust container, motor, and battery. The display shows the operating mode and battery status.
Main Unit Components:
- Charging contact point
- Mode switch / Power switch
- Display
- Handle length adjustment button
- Dust container release button
- Ventilation opening
- Shock absorber
- Wheel
- Dust container
- Dust container release button
Accessories:
- Crevice tool
- Soft brush
- Mattress brush
- Water tank module
- Floor tile cleaning attachment
- Wide nozzle
- HEPA filter
- Cleaning brush
5. Parts and Accessories
The package includes various parts and accessories for different cleaning tasks. Refer to the packing list for the actual contents of the delivery.
- Mattress brush: For cleaning mattresses, curtains, and other textile surfaces, and for removing mites.
- Water tank module: For wet cleaning tasks.
- Floor tile cleaning attachment: Specifically designed for cleaning floor tiles.
- Crevice tool: Ideal for tight spaces like corners, edges, and car interiors.
- Soft brush: Suitable for delicate surfaces and dusting.
- Wide nozzle: For cleaning larger areas like floors, carpets, and furniture.
- HEPA filter: For filtering fine particles and dust from the air.
- Cleaning brush: For cleaning the brush roller and filters.
6. Assembly
a) Vacuum Cleaner Assembly
The vacuum cleaner can be assembled by connecting the main unit to the metal adjustable handle and then attaching the desired cleaning head or accessory.
b) Installing Accessories
Various accessories are compatible with this vacuum cleaner. Attach the necessary accessory or cleaning tool to the vacuum cleaner depending on the specific task.
- Installing the crevice tool: Insert the crevice tool into the suction port of the main unit as shown in the figure. Push the tool until it is securely in place.
- Installing the soft brush: If desired, attach the soft brush to the crevice tool by pushing it until it is securely in place.
- Installing the wide nozzle on the metal adjustable handle: Insert the wide nozzle into the suction port of the adjustable handle as shown in the figure. Push the nozzle until it is securely in place.
- Installing the crevice tool on the metal adjustable handle: Insert the crevice tool into the suction port of the adjustable handle as shown in the figure. Push the tool until it is securely in place.
Accessories that can be directly connected to the main unit include the metal adjustable handle, mattress brush, and wide nozzle. Their attachment method is the same as for the crevice tool.
c) Installing the Wall Mount
The wall mount is designed for storing the vacuum cleaner when not in use. Ensure it is located near a power outlet.
Before installation, ensure the wall is clean and free of dust.
- Measure a height of 98-105 cm and mark the installation location.
- Remove the protective film.
- Attach the wall mount to the wall, applying slight pressure to ensure it is firmly secured.
7. Operation
a) Charging
Fully charge the vacuum cleaner before first use.
- To charge, connect one end of the power adapter to the vacuum cleaner's charging port and the other end to a wall outlet. A full charge takes approximately 3.5 hours.
Using the wall mount:
- Place the main unit onto the wall mount and press gently to ensure it is securely attached. Connect one end of the power adapter to the AC power source and the other end to the main unit's charging port. Secure the charging cable in the grooves on the wall mount.
- During charging, the numerical battery charge indicator on the display will increase, and the LED outline will gradually illuminate. When the battery is fully charged, the numerical indicator will reach 100, and the LED outline will be fully illuminated.
Keep the vacuum cleaner out of reach of children and pets to prevent injuries during storage or charging on the wall mount.
Ensure the vacuum cleaner is securely attached to the wall mount to avoid injuries in case the main unit falls.
b) Powering On/Off
- To turn on the vacuum cleaner, press and hold the power switch. The vacuum cleaner defaults to 'ECO' mode. To switch between 'ECO', 'STANDARD', and 'TURBO' modes, press the mode switch or the power switch. To turn off the appliance, press and hold the power switch again.
Display
During operation, the LED outline on the display changes according to the operating modes. In 'TURBO' mode, all LED indicators are lit. In 'STANDARD' mode, 2/3 of the LED indicators are lit. In 'ECO' mode, 1/3 of the LED indicators are lit. The display also shows icons for filter replacement reminders and dust container full notifications.
c) Using the Brush Roller
The soft roller HL can be used for cleaning floor tiles, wooden floors, carpets, etc.
d) Using Accessories
- Crevice tool: For tight spaces such as doors, windows, stairs, etc.
- Mattress brush: For beds, curtains, and other textile surfaces, as well as for removing mites.
8. Cleaning and Maintenance
Always press 'OFF' and unplug the unit before performing maintenance. Never use aggressive detergents, rubbing alcohol, or other chemical solutions, as they may damage the casing or cause the appliance to malfunction.
a) Cleaning the Dust Container
- Place the dust container over a trash bin. Press the dust container emptying button to open the container lid and discard its contents into the bin.
- Hold the cyclone and rotate it clockwise to remove it from the dust container. Lift the filter and remove it from the cyclone.
- Use the cleaning brush to clean the filter and cyclone. Rinse them under running water. Allow parts to air dry completely for at least 24 hours before reinstallation.
- Reinstall the filter and cyclone into the dust container. Press the dust container lid until it clicks into place.
For maximum efficiency, it is recommended to replace the filter every 3 months. Use only manufacturer-specified filters.
b) Cleaning the Rear Filter
- Removing the top cover from the main unit: To remove the top cover from the main unit, hold it and rotate it counter-clockwise.
- Cleaning the rear filter: To remove the rear filter, pull its handle upwards. Rinse the rear filter under running water. Allow parts to air dry completely for at least 24 hours before reinstallation.
c) Cleaning the Brush Roller
- Assembling and disassembling the brush roller: Turn the power brush face down. Pull the end cap on the right side of the power brush. Lift the brush roller and replace it with a clean one. Insert the end cap into the opening until it clicks.
- Clean the brush roller: Use the cleaning brush to remove hair and fibers accumulated around the brush roller. Rinse it under running water. Allow parts to air dry completely for at least 24 hours before reinstallation.
d) Cleaning the Mattress Brush
- To remove the end cap of the mattress brush, pull it down as shown in the figure. Remove the mattress brush roller and rinse it under running water. Allow parts to air dry completely for at least 24 hours before reinstallation.
- Reinstall the brush roller and secure it with the end cap.
9. Troubleshooting
To reduce the risk of electric shock and unintentional operation, turn off the power and unplug the appliance before servicing.
| Problem Description | Possible Cause | Possible Solution |
|---|---|---|
| Brush roller not rotating | Hair, fibers, and other debris accumulated around the brush roller | Remove debris accumulated around the brush roller. |
| Motor not working | Low battery charge | Charge the vacuum cleaner. |
| Full dust container | Empty the dust container. | |
| Vacuum cleaner overheating due to prolonged use | Restart after cooling down. | |
| Low suction power | Filter excessively covered with dust | Clean or replace the filter. |
| Brush roller air intake or brush roller itself is blocked | Clean the power brush. | |
| Cyclone blocked by paper or wool fibers | Regularly check and clean the cyclone. | |
| Air channel between dust container and main unit is blocked | Regularly check and clean the air channel between the dust container and the main unit. | |
| Display screen does not turn on during charging | Power adapter not connected correctly | Connect the power adapter properly. |
| Wheels on the brush roller not rotating | Hair, fibers, and other debris accumulated around the wheels | Clean or replace the wheel. |
For any other circumstances or if the above solution does not resolve the issue, please contact us at service@xclea.com.
10. Technical Data
a) Vacuum Cleaner Body
| Product Model | QYXCQ01*/QYXCQ02*/QYXCQ03*/QYXCQ04* | Charging Time | ≤ 3.5 hours |
|---|---|---|---|
| Power Brush Model | QYXCQDS01 | Operating Time | Approx. 65 min (ECO mode) |
| Mattress Brush Model | QYXCQCMS02 | Operating Time | Approx. 30 min (STANDARD mode) |
| Rated Operating Voltage | 25.2 V | Operating Time | Approx. 10 min (TURBO mode) |
| Rated Charging Voltage | 30 V | Dust Container Capacity | Approx. 0.65 L |
| Lithium Battery Capacity | 2500 mAh x 7 / 63 Wh | Noise | <82 dB(A) |
| Rated Power | 385 W (Total) | Dimensions | 1191 x 259 x 221 mm |
| Motor Power | 350 W (Motor) | Net Weight | Approx. 2.7 kg |
| Motor Power | 35 W (Power Brush) |
The asterisk (*) in the product model number indicates the product color, and the specific designation on the product casing shall prevail. For example: B = Black, W = White, G = Grey, P = Purple.
b) Power Adapter
| Rated Input Voltage | 100-240 V |
|---|---|
| Rated Input Current | 1.0 A |
| Rated Output Voltage | 30 V |
| Rated Output Current | 0.8 A |
| Product Model | South Korea: KA2401A-3000800KR, EC: KA2401A-3000800EU, Australia: KA2401A-3000800AU, UK: KA2401A-3000800BS, USA: KA24B-3000800US, Japan: KA2401A-3000800JP, Taiwan: KA2401A-3000800TW, China: KA2401A-3000800CN |
11. Disposal
Product Disposal
This marking indicates that the product should not be disposed of with other household waste within the EU at the end of its service life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, responsibly recycle it to promote the sustainable reuse of material resources. To return your used device, use the return and collection system or contact the retailer from whom the product was purchased. They can take this product for environmentally safe recycling.
12. Warranty and Liability
This product is warranted for a period of 2 years (in accordance with local legislation) from the date of purchase against any defects caused by manufacturing or material defects. This warranty does not cover damage caused by improper installation, misuse, or normal wear and tear. Specifically, the warranty does not cover:
- Damage or problems caused by incorrect operation, accident, physical impact, or connection to a power supply with incorrect current or voltage.
- Altered devices where the warranty seal or serial number has been damaged, defaced, removed, or oxidized.
- Battery failure resulting from overcharging or failure to follow safety precautions in the user manual.
- Aesthetic defects, including scratches, dents, and other cosmetic damage.
- Damage caused by intervention by unqualified personnel.
- Malfunctions caused by normal wear and tear or aging of the device.
- Software updates due to changes in network parameters.
- Malfunctions caused by the use of third-party software intended to change, modify, or adapt installed programs.
- Malfunctions caused by the use of accessories not approved by the manufacturer.
- Oxidized products.
Warranty Service Conditions:
To claim warranty service, you must return the product to the place of purchase and provide proof of purchase of the product and its accessories (e.g., cash receipt or sales receipt), as well as the original packaging. The product, packaging, or proof of purchase document must contain important information such as the date of purchase, model, and serial number or IMEI number. Provide the necessary components for the product's proper functioning, such as the power cord, adapter, etc. If your claim is covered by the warranty, the after-sales service department, within the scope of local legislation, may:
- Repair or replace defective parts.
- Exchange the returned product for an equivalent product with at least the same capabilities and equivalent performance.
- Refund the buyer the amount equal to the purchase price indicated on the receipt.
- Service life - 2 years.
The possibility of using one of the proposed 3 options does not grant the right to extend or renew the warranty period.
(1) (1) C€ IRI RoHS
Made in China
Manufacturer: XCLEA Smart Technology Co., Ltd. Address: Floor 4, No. 1719-17, Huishan Road, Huishan Economic Development District, Wuxi City, KHP.
Applicable Standards: EN 55014-1:2006/A2:2011, EN 55014-1:2017, EN 55014-2:1997/A2:2008, EN 55014-2:2015, EN 301 489-1 V2.2.3:2019, Draft EN 301 489-17 V3.2.2:2019, EN 300328 V2.2.2:2019, EN 50665:2017, EN 60335-1:2012/A2:2019, EN 60335-2-2:2010/A1:2013, EN 62233:2008. Complies with TR CU 004/2011 "On the safety of low-voltage equipment", TR CU 020/2011 "Electromagnetic compatibility of technical means", TR EAEU 037/2016 "On the restriction of the use of hazardous substances in electrical and electronic products". For information on the month and year of manufacture, see the box.
Illustrations may differ from the actual product. We are constantly striving to improve our product range, so the specifications contained herein are subject to change without prior notice.
Service Email: service@xclea.com Corporate Website: www.xclea.com For sales information, please visit our website: www.xclea.com QYXCQ01*_QYXCQ02*_QYXCQ03*_QYXCQ04*_UM_RU_V2.0
