GROHE Zedra Pull-Down Kitchen Faucet
This document provides installation, specifications, and care instructions for the GROHE Zedra Pull-Down Kitchen Faucet.
Product Overview
The GROHE Zedra faucet is designed for use with pressurized storage heaters, thermally controlled instantaneous heaters, and hydraulically controlled instantaneous heaters. It is not compatible with low-pressure storage heaters (displacement water heaters).
Important: Flush the piping system thoroughly before and after installation.
Parts Diagram
The following diagram illustrates the various components of the GROHE Zedra faucet:
Specifications
Flow Pressure:
- Minimum: 7.25 psi
- Recommended: 14.5 - 72.5 psi
- For pressures greater than 72.5 psi, a pressure reducing valve is required.
Operating Pressure:
- Max. operating pressure: 145 psi
- Test pressure: 232 psi
Temperature:
- Max. (hot water inlet): 158 °F (70 °C)
- Thermal disinfection is possible.
Water Connection:
- Cold: Right
- Hot: Left
Cartridge:
- Non-reversible cartridge
Notes:
- Avoid significant pressure differences between cold and hot water supply.
- Installation must comply with local codes and regulations.
Installation Instructions
- Step 1: Prepare the mounting surface. Ensure the hole diameter is appropriate for the faucet base. [Illustration showing drilling and mounting preparation]
- Step 2: Mount the faucet. Secure the faucet to the sink or countertop using the provided mounting hardware. [Illustration showing faucet mounting]
- Step 3: Connect the water supply lines. Ensure correct connection for hot and cold water. [Illustration showing water line connections]
- Step 4: Connect the pull-down hose and sprayer. [Illustration showing hose and sprayer connection]
- Step 5: Secure the hose weight. [Illustration showing hose weight installation]
- Step 6: Final checks and testing. Ensure all connections are tight and there are no leaks. [Illustration showing final checks]
Care and Maintenance
For detailed care instructions for this faucet, please refer to the Limited Warranty supplement.
General Care:
- Clean the faucet regularly with a soft, damp cloth.
- Avoid using abrasive cleaners or scouring pads that can scratch the finish.
- For stubborn deposits, use a mild soap solution and rinse thoroughly.
Troubleshooting
If you encounter issues with your GROHE Zedra faucet, consult the troubleshooting section in the Limited Warranty supplement or contact GROHE customer support.
Additional Information
Document Reference: 99.1207.231/ÄM 251548/07.22
Website: www.grohe.com