Instruction Manual for LEDLyskilder models including: VP LED RF Controller, VP, LED RF Controller
LEDlife rWave RGB WW LED strip controller - 12V (72W), 24V (144W) - LEDLyskilder.no
User Manual Ver 1.1.1 Technical Parameters Model No.: VP 4 Channels/DC power socket input/Step-less dimming/Wireless remote control/Auto-transmitting/Synchronize
LEDlife rWave RGB WW LED strip controller - 12V (72W), 24V (144W) - LEDMegaStore.se
RGBW/RGB/CCT/Dimming 4 Channel LED RF Controller Model No.: VP 4 Channels/DC power socket input/Step-less dimming/Wireless remote control/Auto-transmitting/Synchronize Features LVD RED DC power socket input and 4 channel constant voltage output. Match with RF 2.4G single zone or multiple zone single color, dual color and RGB/RGBW remote control. One RF controller accept up to 10 remote control. 4096 levels 0-100% dimming smoothly without any flash. When using with RGB/RGBW light, built in 10 dynamic mode, include jump or gradual change style. Auto-transmitting function: Controller automatically transmit signal to another controller with 30m control distance. Synchronize on multiple number of controllers. Light on/off fade time 3s selectable. Technical Parameters Input and Output Input voltage Input current Output voltage Output current Output power Output type Dimming data Input signal Control distance Dimming gray scale Dimming range Dimming curve PWM Frequency 12-24VDC 15.5A 4 x (12-24)VDC 4CH,4A/CH,Max 6A 4 x (48-96)W Constant voltage RF 2.4GHz 30m(Barrier-free space) 4096 (2^12) levels 0 -100% Logarithmic 1000Hz (default) Safety and EMC EMC standard (EMC) Safety standard(LVD) Radio Equipment(RED) Certification ETSI EN 301 489-1 V2.2.3 ETSI EN 301 489-17 V3.2.4 EN 62368-1:2020+A11:2020 ETSI EN 300 328 V2.2.2 CE,EMC,LVD,RED Environment Operation temperature Case temperature (Max.) IP rating Ta: -30 OC ~ +55 OC T c: +85OC IP20 Warranty and Protection Warranty 5 years Protection Reverse polarity Short circuit User Manual Ver 1.1.1 VP RGBW/RGB/CCT/Dimming 4 Channel LED RF Controller Mechanical Structures and Installations Power input + Power input - Installation rack + DC socket input LED indicator Match key - + INPUT 12-24VDC OUTPUT W4 + + + + W + + Output LED + Output LED + Output Red LED Installation rack Output Green LED Output Blue LED - Output White LED - 114.00 mm 20.00 mm 38.00 mm Wiring Diagram VP for RGB/RGBW OUTPUT + AC100-240V Power Supply INPUT 12-24VDC 12-24VDC Constant Voltage + VP + + + + + + W RGBW LED strip W W4 RGB remote Note: If connect with RGB LED strip, please long press match key for 15s, the controller will become RGB type. VP for dual color + AC100-240V Power Supply INPUT 12-24VDC 12-24VDC Constant Voltage + VP CCT remote VP for single color OUTPUT W4 + + + + W + + ++ CW WW Dual color LED strip CW WW Dual color LED strip + + + + + + OUTPUT Power Adapter 12-24VDC Dimming remote + INPUT 12-24VDC + VP W W4 Note: User can connect constant voltage power supply or power adapter as power input. Single color LED strip + Single color LED strip + Single color LED strip + Single color LED strip + Page 1 Match Remote Control (two match ways) End user can choose the suitable match/delete ways. Two options are offered for selection: Use the controller's Match key Use Power Restart Match: Short press match key, immediately press on/off key (single zone remote) or zone key (multiple zone remote) on the remote. The LED indicator fast flash a few times means match is successful. Match: Switch off the power of the receiver, then switch on power. Repeat again. Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 3 times on the remote. The light blinks 3 times means match is successful. Delete: Press and hold match key for 5s to delete all match, The LED indicator fast flash a few times means all matched remotes were deleted. Application notes Delete: .Switch off the power of the receiver, then switch on power. Repeat again. Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 5 times on the remote. The light blinks 5 times means all matched remotes were deleted. 1. All the receivers in the same zone. 30m 30m 30m RF remote Auto-transmitting: One receiver can transmit the signals from the remote to another receiver within 30m, as long as there is a receiver within 30m, the remote control distance can be extended. Auto-synchronization: Multiple receivers within 30m distance can work synchronously when they are controlled by the same remote, under same dynamic mode and with same speed. Receiver placement may offer up to 30m communication distance. Metals and other metal materials will reduce the range. Strong signal sources such as WiFi routers and microwave ovens will affect the range. We recommend for indoor applications that receiver placements should be no further apart than15m. 2. Each receiver(one or more) in a different zone, like zone 1, 2, 3 or 4. Zone 1 Zone 2 30m 30m Zone 3 Zone 4 RF remote Light on/off fade time Long press match key 5s, then short press match key 3 times, the light on/off time will be set to 3s, the indicator light blink 3 times. Long press match key 10s, restore factory default parameter, the light on/off time also restore to 0.5s. User Manual Ver 1.1.1 RGB/RGBW dynamic mode list VP RGBW/RGB/CCT/Dimming 4 Channel LED RF Controller No. Name No. Name 1 RGB jump 6 RGB fade in and out 2 RGB smooth 7 Red fade in and out 3 6 color jump 8 Green fade in and out 4 6 color smooth 9 Blue fade in and out 5 Yellow cyan purple smooth 10 White fade in and out Dual color control CH1,CH3=Warm white LED CH2,CH4=Cool white LED Each channel can supply up to 96W(@24V) and white balance can be controlled as such: Color temperature Power distribution Cool white CH1=0W,CH2=96W CH3=0W,CH4=96W Neutral white CH1=48W,CH2=48W CH3=48W,CH4=48W Warm white CH1=96W,CH2=0W CH3=96W,CH4=0W Linear dual color tuning Dimming curve for CCT Dimming curve for RGBW/RGB/DIM Warm white(Min. 2700K) Neutral white(4000K) Cool white(Max. 6500K) Recommended CCT range PPW WMM dduuttyy((%%)) PWM duty(%) 110000 9900 8800 7700 6600 5500 4400 3300 2200 1100 Gamma=1.0 10 20 30 40 50 60 70 80 90 100 Brightness(%) 100 Gamma=1.6 90 80 70 60 50 40 30 20 10 10 20 30 40 50 60 70 80 90 100 Brightness(%) Malfunctions analysis & troubleshooting Malfunctions No light Wrong color Uneven intensity between front and rear,with voltage drop No response from the remote Causes 1. No power. 2. Wrong connection or insecure. 1. Wrong connection of R/G/B/W wires. 1. Output cable is too long. 2. Wire diameter is too small. 3. Overload beyond power supply capability. 4. Overload beyond controller capability. 1. The battery has no power. 2. Beyond controllable distance. 3. The controller did not match the remote. Troubleshooting 1. Check the power. 2. Check the connection. 1. Reconnect R/G/B/W wires. 1. Reduce cable or loop supply. 2. Change wider wire. 3. Replace higher power supply. 4. Add power repeater. 1. Replace battery. 2. Reduce remote distance. 3. Re-match the remote. Page 2Corel PDF Engine Version 16.1.0.843 CorelDRAW X6