EverFlourish EW26-UL1 Smart Plug Manual
A) Function
This smart plug can be controlled via a smartphone and tablet.
Diagram Description (Fig 1): A network diagram shows a "Cloud" connected to a "Gateway" via the "Internet". The "Gateway" is connected to a "Smart Phone" and "Tablet" via "WiFi". The "Gateway" also has "Internet" and "WiFi" connections and manages multiple "Socket" devices.
Some functions can also be controlled manually through the button.
Diagram Description (Fig 2): An illustration of the smart plug. It shows the "Button" (labeled 1), the "Indicator" light (labeled 2), the "Input Plug" that connects to the wall socket (labeled 3), and the "Outlet socket" where an appliance is plugged in (labeled 4).
B) Button Control Instruction
How to control manually?
On/Off: Press the button to control the power On or Off manually, regardless of the plug's online or offline status.
Add Device: To add the device through the TUYA "Smart Life" App, press and hold the button for more than 5 seconds to make the indicator blink.
Indicator Conditions:
- Blink: Waiting for Wi-Fi connection through "Smart Life".
- Continuous light: Power On.
- Extinguished: Power Off.
C) Power Connection
- Make sure all electrical appliances are powered off before connecting to the power socket.
- Plug the smart plug into a power socket.
D) On/Off Control
Control Manually
Press the button to control the power On or Off manually.
Smart Phone Control
Press On or Off in the Smart Life App to control this smart plug.
E) Parameters
- Voltage/Frequency: AC 125V~ 60Hz
- Power Rating: 1875W (resistive), 10A Tungsten, Motor Load 1/2HP
- Wi-Fi: 2.4GHz, IEEE 802.11/b/g/n
F) Manufacturer
Brand: EverFlourish
Manufacturer: Ningbo EverFlourish Smart Technology Corp., Ltd.
Address: 77 Wuxiang East Road, Yinzhou, Ningbo, 315111, P.R.China
Compliance Information
This device complies with Part 15 of the FCC Rules and Innovation, Science and Economic Development Canada's licence-exempt RSS(s).
Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
MPE Reminding: To satisfy FCC / IC RF exposure requirements, a separation distance of 20 cm or more should be maintained between the antenna of this device and persons during device operation. To ensure compliance, operations at closer than this distance is not recommended.
(French compliance summary: L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : 1. L'appareil ne doit pas produire de brouillage; 2. L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.)
