Atomi LED Patio Umbrella Light + Speaker User Guide

Key Features

• Wireless light for portable and easy transport.
• Convenient remote control for lighting.
• 6W Bluetooth® speaker for high-quality mobile audio.
• Built-in 4000mAh rechargeable lithium battery supporting LED lighting, music playback, and USB charging.

What's Inside

• LED Patio Umbrella Light + Speaker
• USB-C Cable
• Wall Charger
• Remote Control

Specifications

• USB-C Input: DC 5V 2A
• USB Output: 5V 1A
• Light: 3W
• Bluetooth®: 5.3
• Wattage: 3W*2
• Battery: 4000mAh
• Battery Life: Up to 1 hour for music and light, or 2 hours for music only.

Charging Your Umbrella Light + Speaker

1. Open the lid that covers the control panel.
2. Connect the Umbrella Light/Speaker cable to a USB-C port to charge the device.
3. Connect the other end into a 5V2A or higher USB charger.
4. Press the cover to close it back into place when finished.

Charging Your Device

1. Open the lid that covers the control panel.
2. Connect any USB-enabled device into the USB-A port and the other end into your device.

Attaching the Umbrella Light + Speaker to your Umbrella Pole

Note: The Umbrella Light/Speaker only works with pole sizes from 1-2 inches in diameter.

1. Hold the clip and open the Umbrella Light/Speaker.
2. Place the Umbrella Light/Speaker around the umbrella pole.
3. Close the Umbrella Light/Speaker around the umbrella pole. The device will self-adjust according to pole diameter.

Control Panel

1. Power Indicator: Solid red indicates the device is fully charged. A flashing red light means the device is charging or the battery is lower than 10%.
2. Bluetooth® Indicator: Flashing blue light indicates pairing mode. A solid blue light means Bluetooth® pairing is successful. Continuous flashing blue light means pairing failed.
3. Bluetooth® ON/OFF / Play and Pause: Press for 2s to power ON/OFF. Quickly press to Play/Pause music.
4. USB-C Port: To charge the Umbrella Light/Speaker.
5. Next Song/Increase Volume: Short press to increase volume. Press for 2s to play the next song.
6. USB-A Port: To charge any USB-enabled device.
7. Light ON/OFF/Change Light Mode: Short press to choose light mode. Press for 2s to turn the light ON/OFF.
8. Previous Song/Decrease Volume: Short press to decrease volume. Press for 2s to play the previous song.

Remote

Note: Requires CR2025 batteries (included)

• Change brightness
• Change more color
• Turn light ON/OFF
• RGB + Warm white color change
• Change light mode

Model Number: RF433M24

Rated Voltage: 3V DC

FCC ID: 2BAT7RF433M24

Safety Information

1. Read these instructions carefully for best use.
2. DO NOT use the LED Patio Umbrella Light + Speaker near water or expose it to rain or moisture.
3. DO NOT use the LED Patio Umbrella Light + Speaker near open flames, such as candles, heat sources, radiators, and stoves.
4. Only clean the LED Patio Umbrella Light + Speaker with a dry cloth.
5. Caution: Risk of electric shock. Grounding continuity must be maintained.
6. For connection to a power supply not in the U.S.A., use an attachment plug adapter of the proper configuration for the power outlet, if needed.
7. Please check prior use, if output voltage and current of the power supply is suitable for the product.
8. Children should be supervised to ensure that they do not play with the appliance.

Contact and Warranty Information

For questions or concerns, email us at info@atomiusa.com

Manufactured and marketed by Atomi Inc.

10 West 33rd St., New York, NY 10001

atomi™ is a trademark of Atomi Inc.

Designed by Atomi in New York. Made in China

One-year limited warranty from the date of purchase against defects in material and workmanship.

FCC Compliance

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.