MOZA NANO SE Smartphone Gimbal Stabilizer

Overview

The MOZA NANO SE is a smartphone gimbal stabilizer designed for mobile videography. This section identifies the key components:

• 1 Phone Holder Lock: Secures the smartphone in the holder.
• 2 Bluetooth Indicator: Shows Bluetooth connection status.
• 3 Battery Indicator: Displays the remaining battery level.
• 4 Power Button: Used for turning the device on/off and entering sleep mode.
• 5 Knob: Used for angle adjustments, particularly on the tripod.
• 6 Telescopic Rod: Extends the reach of the gimbal.
• 7 Remote Controller: Integrated controls for operating the gimbal and camera.
• 8 Bracket: Supports the phone holder.
• 9 Tripod: Foldable legs for stable placement.
• 10 M Button (Top Button): Switches between shooting modes (horizontal/vertical) and follow/lock modes.
• 11 - Button (Left Button): Controls zoom or other functions.
• 12 Record Button (Down Button): Starts and stops video recording or takes photos.
• 13 + Button (Right Button): Controls zoom or other functions.

Preparation

1. App Download

The MOZA NANO SE works with the MOZA Genie App for real-time image display, recording, shooting, gimbal settings, and advanced features like Magic mode and time-lapse photography.

Scan the QR code (not provided here) or search for "MOZA Genie" in your device's app store.

• System Requirements: iOS 10.0 or later, Android 6.0 or later.
• iOS Users: Download from the App Store.
• Android Users: Download from Google Play.

2. Tutorial Access

Video tutorials are available on the official MOZA YouTube channel: youtube.com/channel/UCHBIF5mblt4W0iPRKzU6qPA

For technical support, contact: support@gudsen.com

Hotline: 0016467400973

Follow MOZA on social media.

Notes:

1. Fully charge the NANO SE before first use. Disconnect the charger once charging is complete.
2. Unlock the phone holder, install the phone, and then turn on the NANO SE.
3. If the battery indicator shows only 1 bar, charge the unit promptly.
4. The NANO SE is not waterproof. Avoid exposure to liquids and wet hands. Clean with a soft, dry cloth.
5. For long-term storage, turn off the NANO SE and charge/discharge it every 3 months to maintain battery activity.
6. If not used for over 10 days, discharge the battery to 40%-65% for storage to extend battery life. Avoid storing a fully discharged battery to prevent core damage.
7. The NANO SE is a high-precision device; drops or impacts can cause damage and functional issues.
8. Ensure no objects obstruct the gimbal's rotation after powering on.

Unfold and Unlock NANO SE

Unfold the NANO SE as shown in the diagrams (not provided). Adjust the angle as needed for shooting.

Turn the phone clip clockwise 90° to unlock the roll motor.

Install and Balance the Phone

With the NANO SE powered off, open the phone clip and install your phone. Position the clip near the center of the phone.

Adjust the phone's position in the clip to balance it for both portrait and landscape orientations. Maintaining balance is crucial for stabilization and battery efficiency.

Attention:

1. Install the phone before powering on the gimbal. Phone balance significantly affects battery life. Slight imbalance may allow operation but reduces stabilization and increases power consumption.
2. The roll axis can rotate up to 270°. Exceeding this limit may cause damage.
3. If the phone is not detected, the NANO SE may vibrate slightly and enter standby mode. Short press the power button after installing the phone to resume normal operation.
4. The phone clip is designed to prevent accidental clamping.

Buttons and Ports

Power Button:

• Long press (3s): Power On/Off.
• Short press (0.5s): Enter/Exit Sleep Mode.

Remote Controller Functions:

• M Button (Top Button):
  • Click: Switch between horizontal and vertical shooting modes.
  • Double-click: Switch between Follow and Lock modes.
• Bluetooth Reset: Press and hold the M button (top button), then quickly triple-click the + button (right button) to reset Bluetooth if connection fails.

Button Functions (when connected with App or Native Camera):

Notes:

• Native camera recording mode captures video; photo mode takes still photos.
• Magic Video requires connection to the NANO SE and MOZA Genie App.
• Compatibility for native camera control varies by phone model. Refer to the official website or customer support.

Remote Controller Indicator:

• Illuminated when any button is pressed.
• Flashing: Pairing mode.
• Light Off: Bluetooth disconnected.
• Solid: Bluetooth connection successful.

Power Indicator:

• 4 grids solid: 75%-100% battery.
• 3 grids solid: 50%-70% battery.
• 2 grids solid: 25%-50% battery.
• 1 grid solid: 0%-25% battery.
• Lights flashing bottom to top: Charging. Solid 4 grids when fully charged.

Upgrade Mode Indicator:

• Lights flashing top to bottom: NANO SE is in firmware upgrade mode.

Note: If upgrade fails, NANO SE remains in upgrade mode with flashing lights. Restart the MOZA Genie App and NANO SE, then re-attempt the upgrade after connecting Bluetooth.

Charging Port:

Uses a universal USB Type-C port. Recommended charging specification is 5V/1A. Use your own charger, mobile phone chargers, or a power bank. Charging stops automatically when full; disconnect the charger.

Angle Adjustment:

If a folding part is loose, tighten the knob.

Horizontal/Vertical Mode

When the gimbal is powered on, click the M button (top button) to switch between horizontal and vertical shooting orientations.

Telescopic Rod

To extend the telescopic rod, pull upwards on the gray part.

Tripod

To deploy the tripod, push up on the telescopic rod and place it on a leveled surface.

Adjust the tilt axis angle manually as needed. Tighten the knob if the folding part is loose.

Sleeping Mode

When the NANO SE is powered on, manually turn the roll axis counterclockwise until it locks into the built-in motor lock. The device will enter sleep mode.

To wake the NANO SE, manually rotate the roll axis clockwise to unlock, then short press the power button (0.5s).

An icon indicates the roll axis is in the motor lock position.

Working Mode

Lock Mode:

This is the default mode upon powering on. The phone remains level and does not follow the handle's rotation within the motor's range.

Follow Mode:

Double-click the M button (Top button) to switch from Lock Mode to Follow Mode. In Follow Mode, the phone follows the handle's rotations.

Double-click the M button again to exit Follow Mode.

Bluetooth Connection

MOZA Genie App Connection:

1. Turn on Location and Bluetooth on your mobile phone.
2. Launch the MOZA Genie App.
3. Click the flashing Bluetooth icon in the App.
4. Search for the NANO SE signal and select "Hi-Nano-SE-12BB4004XXXX" from the device list to connect.
5. The NANO SE Bluetooth light will remain solid upon successful connection.

Connecting for Native Camera Control:

1. Turn on Location and Bluetooth on your mobile phone.
2. Go to your phone's Bluetooth settings menu.
3. Search for the NANO SE Bluetooth signal and pair with "Hi-Nano-SE-12BB4004XXXX" (no password required).
4. The NANO SE Bluetooth light will remain solid upon successful connection. You can now control your native camera with the remote controller.

Bluetooth Reset:

If the NANO SE cannot be found or the connection fails, press and hold the M button (top button) and quickly triple-click the + button (right button) to reset the NANO SE Bluetooth. After resetting, reconnect via the MOZA Genie App.

Introduction to MOZA Genie App

The MOZA Genie App offers comprehensive control over the NANO SE and camera functions. Key features include:

1. Screen Orientation Lock: Locks the screen orientation.
2. Screen Resolution: Sets the video resolution.
3. Video Frame Rate: Adjusts the video frame rate.
4. Focus and Metering Frame: Tap to set focus/metering point; drag up/down to adjust exposure.
5. Magic Video / Magic Photo: Access creative shooting modes.
6. Filter: Apply visual filters.
7. Switch Cameras: Toggle between front and rear phone cameras.
8. Record Button: Start/stop video recording.
9. Gesture Control: Enable gesture-based camera control.
10. View Photos: Access captured media.
11. Mode Switching: Toggle between Automatic (Auto) and Pro (Manual) camera modes.
12. Frame Ratio / Auxiliary Line / Safe Area: Adjust composition guides.
13. Zoom Factor: Control digital zoom.
14. Sleep Mode Icon: Indicates when the gimbal is in sleep mode.
15. Lock Mode Status: Shows whether the gimbal is in Lock or Follow mode.
16. Gimbal Power Display: Shows the gimbal's battery level.
17. Phone Power Display: Shows the connected smartphone's battery level.
18. App General Settings: Access app-specific configurations.
19. Clear Screen: Hides on-screen parameters for a clean view.
20. NANO SE Settings: Access gimbal-specific settings.

Firmware Upgrade

1. Turn on the MOZA NANO SE and connect it to the MOZA Genie App.
2. A prompt for new firmware will appear in the App's upper left corner. Click the yellow button to start the upgrade.
3. Alternatively, navigate to the NANO SE settings menu within the App and select "Firmware Upgrade".

Notes:

1. Ensure the NANO SE has at least two battery indicator lights on before upgrading. Follow App prompts after connecting.
2. Do not exit the MOZA Genie App, transfer it to the background, or turn off the NANO SE during the upgrade. Monitor App prompts. Restart the App and NANO SE upon successful upgrade.
3. If the upgrade fails, the NANO SE will enter upgrade mode (power light flashes bottom to top). Restart the App and NANO SE, and re-attempt the upgrade after reconnecting Bluetooth.

Storage

Turn off the NANO SE and remove the smartphone. Store the NANO SE according to the provided instructions (refer to diagrams or specific storage guidelines if available).

FAQs

Pairing of Remote Controller and NANO SE:

The NANO SE is pre-paired with its remote controller. If buttons are unresponsive after connecting to the MOZA Genie App, re-pair as follows:

1. Press the Menu button (top button) and Record button (down button) simultaneously until the remote controller indicator flashes.
2. All battery indicator lights will flash. Pairing is complete when the blinking stops.

Battery Indicator Flashing:

If the first battery light indicator (closest to the power button) flashes after powering on and the NANO SE motor is weak, attempt a firmware upgrade. If the issue persists, contact MOZA after-sales service.

NANO SE Registration

To enhance service and experience, register your product the first time you connect the NANO SE to the MOZA Genie App. Enter your email address and the verification code sent to your email.

Attention: If you do not receive the verification code email:

1. Ensure the email address entered is correct.
2. Verify you are checking the correct email inbox.
3. Check your spam or junk folder.
4. Add support@gudsen.com and gudsen-services@gudsen.com to your email contacts or trusted sender list, then request a new verification code.

How to receive a new verification code:

1. The registration interface allows resending the verification code every 60 seconds.
2. Ensure you are using the latest verification code sent; older codes are invalid.

For other questions, contact MOZA after-sales service.

Disclaimer

This document outlines safety and legal responsibilities. Read carefully before use. Failure to follow instructions may cause injury or damage. Shenzhen Gudsen Intelligent Technology Co., Ltd. ("Gudsen Intelligent") reserves the right to update this document without notice. Visit www.gudsen.com for the latest information.

By using this product, you accept these terms. You are responsible for its use and consequences. Use for legitimate purposes and adhere to Gudsen Intelligent's regulations. Gudsen is not liable for damages or legal issues arising from product use.

Safety Guidelines

Warning:

1. Liquids: Do not expose to liquids, immerse in water, or use in wet/rainy environments. Water ingress can cause corrosion, battery combustion, or explosion.
2. Fire: In case of fire, use water, water mist, sand, fire blanket, dry powder, or CO2 extinguisher in that order of preference.
3. Environment: Use between 0°C and 40°C.
4. Disassembly: Do not disassemble. Piercing the battery can cause electrolyte leakage, fire, or explosion.
5. Impact: Do not hit, crush, throw, or place heavy objects on the product.
6. Heating: Do not heat the product, use in microwaves, or pressure cookers.
7. Heat Sources: Keep away from heat sources (stoves, heaters) and avoid leaving in hot cars. Do not store above 60°C. Ideal storage is 22°C to 28°C. Extreme temperatures can render the gimbal unusable.

Product Specifications

Notice: Laboratory environment tests may vary according to different use conditions.