User Manual for MOTREX models including: BP9-MO610LAB, BP9MO610LAB, mo610lab, MTXMO610LAB Android Auto or Apple CarPlay, MTXMO610LAB, Android Auto or Apple CarPlay, Auto or Apple CarPlay, Apple CarPlay, CarPlay
MOTREX CO., LTD. MO610LAB BP9-MO610LAB BP9MO610LAB mo610lab
MainMenu MTXMO610LAB All Menus Radio: Converts to the last played radio mode. Media: can choose to enter the media PhoneAnswer and make a call Apple CarPlay: Runs Apple CarPlay function Android Auto: Runs android auto function. SetupMoves to the settings menu. AuxMoves to the aux Radio FMClick to switch FM mode. AMClick to switch AM mode. Autostore: Channel search mode Media Media can be selected Pause ·You can pause the playing file ·Press [] on screen . Play ·Press [] on screen to play it again. Previous button When it is pressed for a short time. ·Press the previous button to switch to the previous video (playing progress does not exceed 5 seconds). · Press the previous button, the currently playing video will restart (Play progress exceeds 5 seconds). When it is pressed and held ·Rewind the currently playing video Next button When it is pressed for a short time. ·Press a button to cut to the next video When it is pressed and held. ·Fast forward the currently playing video Repeat ·Switch the repeat mode of the song: Repeat All, Repeat Folder, and Repeat Track. Phone Call History ·Show cell phone records Contacts ·Tap to show your phone contacts Phone Dial ·Click on the display keyboard to make a call Android Auto Apple CarPlay Note ·The Bluetooth source of the machine is not available when the carplay is connected. Connect wireless carplay 1. press [setup-device connectiong-phone projection] to wireless carplay connection interface 2. Click [add new] to search for available wireless carplay devices. Press the cancel button to stop the search. Setup Press the [setup] icon on the All Menus interface to enter the setup menu interface. PositionIt can control the sound position Volumecan control the sound Volume Tonecan control the sound Tone Prioritycan control the sound priority ResetResets Sound Settings toFactory Defaults. Aux Aux ·Audio Only FCC Compliance Statement: This device complies with Part 15 of the FCC rules. Operation is subjected to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. The distance between user and products should be no less than 20cm. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. FCC ID: BP9-MO610LAB