Renogy RIV1230P2-126 Pro 3000W 12V Pure Sine Wave Inverter
Introduction
Welcome to the user manual for the Renogy RIV1230P2-126 Pro 3000W 12V Pure Sine Wave Inverter. This manual provides essential information regarding the installation, operation, and maintenance of your inverter. Please read this document carefully before use to ensure safe and efficient operation.
The Renogy RIV1230P2-126 Pro is designed to convert DC power from a 12V battery system into stable AC power, suitable for a wide range of appliances. Its pure sine wave output ensures compatibility with sensitive electronics, while the EcoSleep Mode optimizes energy consumption.
Key Features
- High Power Output: 3000W continuous power and 6000W surge power capacity.
- Pure Sine Wave: Provides clean, stable AC power ideal for sensitive electronics, motors, and medical equipment.
- EcoSleep Mode: Automatically adjusts power consumption to save energy when loads are low. ? (EcoSleep Mode Indicator)
- Comprehensive Protections: Built-in safeguards against overload, short circuit, over-temperature, low input voltage, and high input voltage. ?️ (Protection System)
- LED Indicators: Clear visual feedback on operational status, battery level, and fault conditions.
- Robust Design: Durable construction for reliable performance in various environments.
Specifications
| Feature | Specification |
|---|---|
| Model | RIV1230P2-126 Pro |
| Continuous Power | 3000W |
| Surge Power | 6000W |
| Input Voltage | 12V DC |
| Output Voltage | 120V AC (±5%) |
| Output Frequency | 60 Hz (±0.1 Hz) |
| Waveform | Pure Sine Wave |
| Efficiency | > 88% |
| Idle Consumption | < 1.5A |
| EcoSleep Mode Idle Consumption | < 0.5A |
| Operating Temperature | -20°C to 50°C (-4°F to 122°F) |
| Dimensions (L x W x H) | Approx. 15" x 8" x 6" (380 x 200 x 150 mm) |
| Weight | Approx. 15 lbs (6.8 kg) |
Safety Precautions
- Read all instructions before installation and operation.
- Ensure proper grounding of the inverter and connected equipment.
- Use appropriate gauge wiring for DC connections to prevent overheating and fire hazards.
- Do not expose the inverter to water, moisture, or extreme temperatures.
- Keep the inverter away from flammable materials.
- Disconnect all power sources before performing any maintenance.
- Ensure adequate ventilation around the inverter.
- Do not attempt to disassemble or repair the unit yourself. Contact Renogy support for assistance.
Installation
Proper installation is crucial for the safe and efficient operation of your Renogy inverter.
Mounting
Mount the inverter in a dry, well-ventilated area, away from direct sunlight and heat sources. Ensure it is securely fastened to a stable surface. Avoid mounting in engine compartments or areas prone to excessive vibration.
DC Connections
Connect the inverter's DC input terminals to a 12V battery bank. Use heavy-duty, appropriately sized cables to minimize voltage drop. Crucially, ensure correct polarity: connect the positive (+) terminal of the inverter to the positive (+) terminal of the battery, and the negative (-) terminal of the inverter to the negative (-) terminal of the battery. Reversing polarity will damage the inverter.
The front panel features clearly marked DC input terminals. ⚡ (DC Input Terminals)
AC Connections
Connect your AC appliances to the AC output receptacle on the front panel of the inverter. Ensure the total continuous load does not exceed the inverter's rated power (3000W). The inverter provides a standard 120V AC output.
The front panel includes a standard AC output receptacle. ? (AC Output Receptacle)
Grounding
The inverter is equipped with a grounding terminal. Connect this terminal to the grounding system of your vehicle, boat, or building to ensure safety and protect against electrical surges.
Operation
Powering On/Off
To turn the inverter on, press the power switch located on the front panel. The LED indicators will illuminate to show the status. To turn off, press the power switch again.
LED Indicators
The front panel features an LED indicator array. ? (LED Indicator Array)
- Power: Green light indicates the inverter is on and operating normally.
- Fault: Red light indicates a fault condition (e.g., overload, short circuit, over-temperature). Refer to the troubleshooting section.
- EcoSleep: Blue light indicates EcoSleep Mode is active.
EcoSleep Mode
To activate EcoSleep Mode, press and hold the power switch for a few seconds when the inverter is on. In this mode, the inverter reduces its idle power consumption by dimming the output when no load or a very low load is detected. The inverter will automatically wake up when a load is connected.
Troubleshooting
| Symptom | Possible Cause | Solution |
|---|---|---|
| Inverter does not turn on | Battery voltage too low. | Charge or replace the battery. Ensure battery connections are secure. |
| DC fuse blown. | Check and replace the DC fuse. Ensure correct fuse rating is used. | |
| Inverter shuts down unexpectedly | Overload condition. | Reduce the connected load. Ensure total load is within 3000W continuous. |
| Over-temperature. | Ensure adequate ventilation. Allow the inverter to cool down. | |
| Low input voltage. | Check battery voltage. Ensure battery is sufficiently charged. | |
| AC output voltage is low or unstable | Loose DC connections. | Tighten all DC cable connections. |
| Battery voltage is low. | Charge the battery. | |
| LED indicator shows fault | Refer to specific fault codes if available, or consult the manual/support. | Check for overload, short circuit, or temperature issues. |
Warranty Information
Renogy offers a limited warranty for its inverters. Please refer to the warranty card included with your product or visit the Renogy website for detailed terms and conditions.
