JBL PartyBox Encore Quick Start Guide
What's in the Box ?
- JBL PartyBox Encore speaker
- Microphone (quantity varies by region)
- Power cable (quantity and plug type vary by region)
- Batteries (for microphone)
Bluetooth Pairing ?
1. Turn on Bluetooth on your device.
2. Turn on the speaker.
3. Select "JBL PartyBox Encore" from your device's Bluetooth list.
The speaker will indicate "Connected".
Play ▶️
Playback Controls:
- Play/Pause: Press the button once (x1).
- Skip Forward: Press the button twice (x2).
- Skip Backward: Press the button three times (x3).
Volume Controls:
- Volume Up: ?
- Volume Down: ?
Bass Boost: Press the BASS BOOST button to enhance bass.
Lightshow ✨
Customize your party atmosphere with dynamic light effects. Apply presets and more using the JBL PARTYBOX app.
Available Presets:
- Rock
- Flow
- Cross
- Ripple
- Flash
Advanced Light Controls are available within the JBL PARTYBOX app.
App ?
Download and install the JBL PARTYBOX app to unlock the full potential of your product.
Available on:
Microphone ?
1. Insert batteries into the microphone.
2. Turn the microphone ON/OFF.
Karaoke Controls:
- MIC: Adjust microphone volume.
- BASS: Adjust bass for vocals.
- TREBLE: Adjust treble for vocals.
- ECHO: Adjust echo effect.
True Wireless Stereo ?
Connect two JBL PartyBox Encore speakers wirelessly for immersive stereo sound. Press the TWS button on both speakers to initiate pairing.
Charging ⚡️
Connect the AC power cable to the speaker and a power outlet.
Battery Level Indicators:
- 20%
- 50%
- 100%
USB Charge Out: 5V / 2.1A (maximum) for charging external devices.
Splash Proof IPX4 ?
The JBL PartyBox Encore is splash-proof (IPX4 rated). Do not immerse in water or expose to direct high-pressure water streams.
Technical Specifications
| Feature | Specification |
|---|---|
| Transducers | 1 x 5.25 inch woofer, 2 x 1.75 inch tweeter |
| Output power | 100 W RMS |
| Power input | 100-240 V ~ / 50-60 Hz |
| Frequency response | 50 Hz - 20 kHz @-6 dB |
| Signal-to-noise ratio | > 80 dB |
| Battery type | Li-ion polymer 27.0 Wh (equivalent to 3.6 V / 7500 mAh) |
| Battery charge time | 3.5 hours |
| Music play time | Up to 10 hours (dependent on volume level and audio content) |
| USB format | FAT16, FAT32 |
| USB file format | .mp3, .wma, .wav |
| USB charge out | 5 V / 0.5 A (maximum) |
| Cable type | AC Power Cable |
| Cable length | 2000 mm / 78.7" |
| Bluetooth® version | 5.1 |
| Bluetooth® profile | A2DP 1.3, AVRCP 1.6 |
| Bluetooth® transmitter frequency range | 2.4 GHz - 2.4835 GHz |
| Bluetooth® transmitter power | < 9 dBm (EIRP) |
| Bluetooth® transmitter modulation | GFSK, π/4 DQPSK, 8DPSK |
| Product dimensions (W x H x D) | 276 mm x 327 mm x 293 mm / 10.87" x 12.87" x 11.54" |
| Net weight | 6.3 kg / 13.89 lbs |
| Packaging dimensions (W x H x D) | 472 mm x 354 mm x 326 mm / 18.58" x 13.94" x 12.83" |
| Gross weight | 8.34 kg / 18.39 lbs |
| Wireless microphone spec | |
| Frequency response | 60 Hz - 15.8 kHz |
| Signal-to-noise ratio | > 65 dB |
| Transmitter transmitting power | < 10 mW |
| Distance between transmitter and receiver | ≤ 20 m |
Notes & Compliance
Note: The product is in compliance with the European Union energy legislation.
1) Bluetooth/TWS connection mode: The product is intended for streaming music via Bluetooth. The Bluetooth connection must remain active at all times for proper operation. The product enters sleep mode (networked standby) after 20 minutes without operation (power consumption < 2.0 Watts), re-activated via Bluetooth.
2) Other mode: The product enters standby mode after 20 minutes without operation (power consumption < 0.5 Watts).
Maximum operation temperature: 45 °C.
Do not place naked flame sources (e.g., lighted candles) on the apparatus.
This equipment is a Class II or double insulated electrical appliance.
Trademarks: The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. Other trademarks and trade names are those of their respective owners.
Compliance: This product is homologated by Anatel, according to regulated procedures for telecommunications product conformity assessment, and meets applicable technical requirements.
Warning: Prolonged exposure to noise levels above 85dB may cause hearing damage.
