intercoax.com
User Guide for INTERCOA models including: ECP-01 Series Single Port Ethernet over Coax Transmitter, ECP-01 Series, Single Port Ethernet over Coax Transmitter, Ethernet over Coax Transmitter, Coax Transmitter, Transmitter
File Info : application/pdf, 2 Pages, 510.15KB
DocumentDocumentQuick Start Guide ECP-01T / ECP-01R Please read carefully the instruction manual before use. Contents of this manual are subject to change without prior notice for reasons such as functionality enhancements. Package Rev.6.7 ECP-01T (Transmitter) ECP-01R (Receiver) Quick Start Guide Hardware Overview Right Status LEDIndicator StatusLED Indicator LILNIKNK AACCTT PPooEE SwitchOONN/O/OFFF RJ45 (E(CEPC-P0-10T1T only)) Left BNBCNCconnector DDCCPowerJack Top Mounting ScrewHole Mounting ScrewHole LED Indicators Indicator LINK ACT Color Function Ethernet Data Act Ethernet Connect Act Overview ECP-01 Series are High-Speed, long distance Ethernet & PoE extender that makes possible to transmit the Ethernet signal and PoE up to 400m through coaxial cables in different situations. It is cost-effective and time saving solution to migrate existing analog system to IP based system since ECP-01 series support easy installation utilizing the existing coaxial cable. With long distance transmission feature, the device makes to overcome 100 meters distance limitation easily and reduces the construction cost significantly compared with fiber optic configuration. Features Long reach Ethernet & PoE extension over existing coaxial cable Data + Power over coaxial cable Data distance up to 1000 m 100Mpbs Full Duplex PoE, PoE+, Extra PoE (Max. 60W PoE output, ECP-01T model only with DC Power adapter) LED Indication (Data, Power) Plug & Play Support PoE, PoE+ Input (25.5W) from PoE Switch / PoE NVR (ECP-01R model only) Slim design Installation Guide 1. Connect Ethernet cable (Cat5e or better) from PoE Switch/NVR to ECP-01R. Check LEDs on ECP-01R. Ethernet cable (Cat5e or better) PoE Switch/NVR Check LEDs 2. Connect coaxial cable (RG59 or better) to ECP-01R. Connect coaxial cable from ECP-01R to ECP-01T. Coaxial cable (RG59 or better) 3. Connect Ethernet cable (Cat5e or better) from ECP-01T to IP Camera (PoE Model Only). Check LEDs on ECP-01T. Î Set ECP-01T, PoE Switch ON to supply direct power to IP camera. Set ECP-01T, PoE Switch OFF to connect PC or network switch devices. Ethernet cable (Cat5e or better) Check LEDs [Simply IP and PoE over Coax] PoE Camera ECP-01T [High Power over Coax] PoE Camera ECP-01T [Extra PoE (60W) over Coax] 57V DC/1.2A Power Supply (Sold Separately) PoE Camera ECP-01T Applications Coaxial Cable ECP-01R PoE NVR Coaxial Cable 57V DC/1.2A Power Supply (Sold Separately) ECP-01R NVR Coaxial Cable ECP-01R PoE NVR/NVR Specification Model ECP-01T ECP-01R Interface Coax Ethernet 1 x 75 BNC (Female) - Ethernet over Coax (B-LinX) 1 x RJ45 - 100 Base-T Transmission Rate 100Mbps Full Duplex (100Mbps between Intercoax devices) Transmission Distance Ethernet PoE (PoC) up to 400 m when 100Mbps is used up to 1000 m when 10Mbps is used (5C-HFBT, RG-59 or better) up to 400meter (RG-59, RG-6) LED Indication Ethernet 1 x Link (Yellow) / 1 x ACT (Green) Input B-Linx or DC48V~57V PoE Switch or DC48V~57V Power PoE Output IEEE802.3af (PoE), IEEE802.3at (PoE+), Extra PoE up to 60W with 57V Power Adaptor PoE Not Supported PoC Only Mechanical Dimension Weight 83(L) x 51(W) x 24(H)mm 52g Operating Temp -20 ~ 60°C Environment Storage Temp -30 ~ 80°C Relative Humidity 10% ~ 90% Compliance Certification Surge Protection FCC, CE, KC, RoHS IEC 61000-4-5 4kV(1.2 / 50us), 2kA(8 / 20us) Optional Accessories 57VDC / 1.2A External Power Supply Caution Please install the device following the installation guide. Do not touch the device and cable with wet hands. Keep away from moisture and shock. Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus that produce heat. Indoor use only. (Use waterproof junction box when it is used in outdoor) Do not use for other purposes. Do not disassemble or modify this device. Do not put any sticker or paint on it. If this device is defective or malfunctioning, please unplug the power source immediately and contact dealer or service center. Please use the rated power supply for the product. Connect DC power to this device first and then to AC outlet. Warranty This device has passed the quality control and product inspection. Please install and use according to the installation guide. The warranty period for this product is 24 months from the date of purchase. If this device is defective or malfunctioning, please unplug the power adapter immediately and contact dealer or service center. Any damages or breakage from user's abuse, accident, modification or natural disasters will not be covered manufacturer's warranty. Please visit below website for more detailed information. Web: http://www.intercoax.com Tel: +82. 31. 365. 3133~4 E-mail: info@intercoax.com Fax: +82. 31. 365. 3135 This device complies with part 15 of the fcc rules. Operation is subject to the following two conditions : (1) This device may not cause harmful interference, and (2) This device must accept any interference received including interference that may cause undesired operation © Intercoax Co., Ltd.