18 Nozzles Oscillating Sprinkler

Introduction

This manual provides instructions for familiarizing yourself with the various parts, components, use, handling, and features of the 18 Nozzles Oscillating Sprinkler. Please save this manual for future reference.

Get To Know Your Sprinkler

Illustration of the oscillating sprinkler with numbered components: 1. Base, 2. Spray nozzles (18), 3. Oscillator tube, 4. Sliding tabs, 5. Hose-end, 6. Inlet filter, 7. Cleaning pin.

Specifications

• Plastic nozzle heads: 18
• Adjustable range control: Yes
• Coverage Max: 4000 sq ft (371 m²) (Based on 40 PSI / 2.76 Bar)

Usage

1. Attach your garden hose to the unit.
2. Use the range sliding tabs to select the desired rectangular watering position distance. (See Fig. 1 & Fig. 2)
3. Turn on the faucet and check the watering process. Make adjustments as needed.

Fig. 1 & Fig. 2: Diagrams illustrating the selection of watering distance using sliding tabs and the resulting spray patterns.

Maintenance + Care

If your sprinkler displays irregular water pressure or becomes clogged due to dirt buildup, perform the following maintenance tasks:

Cleaning the Inlet Filter

1. Remove your hose from the sprinkler.
2. Locate the small inlet filter at the hose-end of the oscillator. Remove it and rinse under water to remove dirt. (See Fig. 3)

Fig. 3: Diagram showing the removal of the inlet filter from the hose-end of the sprinkler.

Flushing the Sprinkler

1. Connect the oscillator to a faucet.
2. Turn on the faucet. While water is running, gently spin the oscillator tube back and forth for a few minutes. (See Fig. 4)

Fig. 4: Diagram illustrating the process of flushing the sprinkler by connecting it to a faucet and spinning the tube.

Clearing Nozzle Clogs

1. Remove the cleaning pin from the opposite end of the oscillator. (See Fig. 5)
2. Use the provided cleaning pin to clear any clogs from the spray nozzles while water is running from the faucet (as in step 2 of flushing). (See Fig. 6)

Fig. 5: Diagram showing the cleaning pin being removed from the oscillator.

Fig. 6: Diagram depicting the use of the cleaning pin to clear clogs from the spray nozzles while water is running.

Storage

Drain the sprinkler after use. Do not allow water to freeze in the sprinkler. (See Fig. 7)

Fig. 7: Illustration suggesting draining the sprinkler for storage to prevent freezing.

Tips

• Plan the best coverage design for watering to avoid wasting water resources before placing the sprinkler.
• Drain any water from the sprinkler after use to preserve the unit for longer lasting use.
• Store the sprinkler in a dry, warm area until required.
• Water only when necessary, preferably in the morning, to minimize water loss through evaporation. For deep root growth, water deeply but infrequently. Watering every second day can provide better water coverage. Using a timer can help reduce waste. Monitor water application to prevent run-off.

Cautions

• For outdoor use with cold water only.
• Do not spray near electrical connections.
• When not in use, rinse the tool with water to remove dirt, dry it, and store indoors.

⚠️ CAUTION ⚠️ This product can expose you to chemicals including styrene, which is known to the State of California to cause cancer. For more information, visit www.P65Warnings.ca.gov.

Included Accessories

A simple quick adapter (2 pcs) and hose connector (1 pc) with a water stop feature are included to simplify your watering experience.

Simply connect the hose connector to the end of your hose, and then attach your accessories to the adapter. You can interchange various accessories quickly without needing to turn off the water tap, as the adapter stops water flow when accessories are removed. This design prevents hose kinking or twisting, allowing your hose to swivel 360 degrees.

Illustration of quick-connect accessories. It shows a hose connector attaching to a garden hose. An adapter with a twist-and-lock mechanism (labeled 'LOCK' and 'UNLOCK') connects to the hose connector and then to various garden watering tools like sprinklers or nozzles. This mechanism is designed to prevent accidental disconnection and allows the hose to swivel 360 degrees. The diagram also indicates compatibility with 5/8-inch and 1/2-inch garden hoses.