EU Type Examination Certificate

Certification Information

Product Identification Information

Conformity Assessment

Radio Equipment Specifications

Examined Technical Documentation File (TDF)

• Label Drawing/Location
• EU Declaration of Conformity
• Schematic Diagram
• Block Diagram
• Test Reports/Safety
• Test Reports/RF Exposure
• Test Reports/Radio
• Test Reports/EMC
• Test Reports/Emergency Service
• Power of Attorney Letter
• User Manual
• Operational Description
• Parts/Bill of Materials
• External Photos
• Internal Photos
• Test Setup Photos
• Other
• Model Variance Statement
• Risk Assessment
• Antenna Specification
• PCB Layout

TDF Reference Number: EN512010

Issue Date: Jun. 30, 2025

Certificate Note

1. The device is restricted to indoor use only when operating in the 5250~5350 MHz frequency range.
2. The transmitter antennas must be installed to provide a separation distance of at least 20cm from all persons.
3. This radio module has been assessed for use in the temperature range of -40°C to +105°C and with an input voltage range of DC 3.00V~3.60V. When installing this radio module into a host product to create a new radio equipment device, the manufacturer responsible for placing the final radio product on the market in the EU must assess if the combination of this radio module and the host product complies with the essential requirements of the RE Directive 2014/53/EU.

Certification Remark

CE Marking

CE

Regulation (EC) No 765/2008, Article 30 and Annex II

The manufacturer to affix the CE marking to the radio equipment or its data plate when placing a product on the market unless this is not possible or not warranted on account of the nature of the radio equipment. This marking shall have a minimum height of 5 mm. The CE marking shall also be affixed visibly and legibly to the packaging. If the nature of the radio equipment does not allow a marking of at least 5 mm, the manufacturer may affix a CE marking that is smaller than 5 mm to the product under the condition that it remains visible and legible. If it not possible or not warranted on account of the nature of the radio equipment to affix a CE marking on the product, the manufacturer may affix it visibly and legibly only to the packaging. If the radio equipment is subject to other pieces of EU legislation which do not allow the CE marking to be smaller than 5 mm, then the possibility of using a smaller CE mark cannot be used by the manufacturer (e.g. RoHS).

Obligations of manufacturers

Radio Equipment Directive 2014/53/EU, Article 10. Radio Equipment Directive 2014/53/EU, Annex III, Module B,7: The manufacturer shall inform the notified body that holds the technical documentation relating to the EU-type examination certificate of all modifications to the approved type that may affect the conformity of the radio equipment with the essential requirements of this Directive or the conditions for validity of that certificate. Such modifications shall require additional approval in the form of an addition to the original EU-type examination certificate. Radio Equipment Directive 2014/53/EU, Annex III, Model B, 9: The manufacturer shall keep a copy of the EU-type examination certificate, its annexes and additions together with the technical documentation at the disposal of the national authorities for 10 years after the radio equipment has been placed on the market.

Certificate Validity

If there is no change on product identification and/or manufacturer's identification or technical modifications which may possibly affect the compliance of the product with the Radio Equipment Directive, and if there is no new guideline published from the EU Commission or new publication of a standard, which supersedes the standard and/or methodology used for assessment, this Notified Body EU type examination certificate remains valid. Notified Body name, Notified Body number and TEC reference shall be listed and agree with information listed in Manufacturer's CE Declaration of Conformity.

Authorized Signature

I hereby attest that technical documentation for the subject equipment was assessed by Sporton International (USA), Inc. acting as Notified Body that the essential requirements of Article 3.1(a), Article 3.1(b) and Article 3.2 of Radio Equipment Directive 2014/53/EU have been met. This EU-type examination certificate is issued in accordance with Annex III, Module B, of Radio Equipment Directive 2014/53/EU based on the documentations as provided to Sporton International (USA) Inc.

Revision History