Mars Gaming MC-3TLITE PC Case
User Manual and Installation Guide
I/O Panel
The I/O panel on the front of the case provides access to power and reset buttons, USB ports, and HD Audio connectors.
Front Panel Connectors:
- Power Button
- Reset Button
- USB Ports
- HD Audio
Accessories
The case comes with various accessories for installation:
- Screws for mounting components
Component Installation
Motherboard Installation
This case is compatible with MicroATX motherboards (24x24cm). For 24x24cm motherboards, some screws on the right side may not be used, but the system remains stable due to other secure mounting points.
Installation Steps:
- Place the motherboard inside the case, aligning it with the standoffs.
- Secure the motherboard with screws.
2.5" SSD & 3.5" HDD Mounting
The case provides mounting locations for both 2.5" SSDs and 3.5" HDDs.
Mounting Locations:
- Location 1: 2.5" SSD
- Location 2: 3.5" HDD
Power Supply Installation
Install the power supply unit into its designated bay and secure it with screws.
Graphic Card Installation
Install the graphics card into the appropriate PCIe slot on the motherboard and secure it to the case.
Fan Installation
Install fans into the designated mounting points within the case. Ensure proper airflow direction.
Troubleshooting
- Computer does not turn on: Verify motherboard documentation and ensure the power button is correctly connected to the motherboard.
- Front panel connectors not working: Check that USB and HD Audio connectors are properly plugged into the motherboard. Ensure motherboard drivers are up-to-date. Test with different devices.
- Component Compatibility: For detailed information on compatibility with graphics cards, liquid cooling, air coolers, and fans, refer to the product specification sheet at www.marsgaming.eu.
- Fan lighting is fixed: The included fan has fixed RGB lighting. Colors cannot be synchronized with other RGB products.
- Fan not spinning: Check fan connections to the power supply and ensure they are secure.
- Excessive noise: Ensure no objects are obstructing the fan. Clean the fan if it has accumulated dust or dirt.
Warranty
The original proof of purchase is required for warranty service. Tampering with the product, technical modifications, or damage from external mechanical forces will void the warranty. For full warranty terms, visit es.marsgaming.eu/es/terms.
Compliance
The EU Declaration of Conformity can be found at www.marsgaming.eu/en/conformity. More information is available at www.marsgaming.eu.
Disposal and Recycling
Do not dispose of this product with regular household waste. Take it to a designated collection and recycling point to promote environmental sustainability.
Contact Information
For questions or replacement parts, contact:
Email: attcliente@biomag.es
Phone: +34945124598
Mars Gaming (Biomag S. L.)
EU office: Barratxi 39, Pab. 3, 01013, Vitoria, SPAIN
Website: www.marsgaming.eu
Safety Reminders
- Do not use in high humidity or near water.
- Keep children away from parts during installation.
- Protect hands and fingers when handling parts.
- Place the product on a flat surface.
- Ensure all components and panels are correctly installed and screws are tightened.
- Disconnect power before cleaning the chassis. Use a soft, dry cloth; avoid abrasive cleaners or solvents.
- Store the computer in a clean, dry environment.
- Do not modify cables or connectors. Do not use non-included adapters or cables.
- Ensure fan connectors are properly connected to the power supply without excessive force. Incorrect connection may damage the unit.
- Important Note: If any damage or irregularities are noticed, do not proceed with installation and contact customer service immediately. Failure to follow instructions may result in injury or further damage.
