Instruction Manual for ERGO models including: Monitor Desk Mount, EBDSK4
Instruction Manual V2.0 Model: EBDSK4. Warning! Do not adjust tension without monitor. 1. Ensure monitor has been attached to the mount. 2. Read your monitor box or manual to find out monitor net weight. 3. Ensure the net weight of monitor (including accessories) is within 17.6 Ibs (8 kg).
01 IMPORTANT SAFETY INFORMATION Check the VESA Pattern of Monitor Before the Installation MAX: 100mm/4in. MAX: 100mm/4in. 100 mm ≈ 4 in. 75 mm ≈ 3 in. • Please read through these instructions completely before attempting
File Info : application/pdf, 12 Pages, 9.34MB
DocumentDocumentMonitor Desk Mount
Instruction Manual
V2.0
Model: EBDSK4
Thank you for choosing this product! We strive to provide you with the best quality products and services in the industry. Should you have any issues, please don't hesitate to contact at JKO2YU@outlook.com (US/CA)
TENSION ADJUSTMENT SHOULD BE DONE ONLY AFTER MOUNT INSTALLATION
Do not adjust tension without monitor. 1. Ensure monitor has been attached to the mount. 2. Read your monitor box or manual to find out monitor net weight. 3. Ensure the net weight of monitor (including accessories) is within
17.6 Ibs (8 kg).
Adjustment Sign
Clockwise to reduce tension(carry less weight)
Counter-clockwise to increase tension(carry more weight)
Warning!
IMPORTANT SAFETY INFORMATION
· Please read through these instructions completely before attempting installation. If you do not understand the instructions or have any concerns or questions, please contact customer service at JKO2YU@outlook.com.
· Check package contents against Supplied Parts and Hardware List to assure that all components were received undamaged. Do not use damaged or defective parts. If you require replacement parts, contact customer service at JKO2YU@outlook.com.
· Not all parts and hardware included will be used. · This product contains a high pressure gas spring, fire and percussion prohibited. Also it is strictly prohibited to dismantle without professionals. Please return to the manufacturer or hand over to professional agencies if the product is abandoned. · Do not use this product for any purpose or in any configuration not explicitly specified in this instruction. We hereby disclaim any liability for injury or damage arising from incorrect assembly, incorrect mounting, or incorrect use of this product.
Check the VESA Pattern of Monitor Before the Installation
MAX: 100mm/4in.
MAX: 100mm/4in.
75 mm 3 in. 100 mm 4 in.
Minimum VESA Pattern: 3 in./75mm(W) x 3 in./75mm(H)
If your monitor VESA is greater than 100 x 100 mm/4 x 4 in. or less than VESA 75 x 75 mm/ 3 x 3 in., this mount is NOT compatible.
If this mount is NOT compatible, please contact customer service at JKO2YU@outlook.com to find a compatible mount.
01
Product Features
270°
C-Clamp Mounting Grommet Mounting
02
Supplied Parts and Hardware List
Arm Assembly
Ax1
Connecting Plate Bx1
Desk Clamp Cx1
Bolt M6x10mm
Dx2
Bolt M6x12mm
Ex3
Bottom Butterfly Nut
Bolt
Plate Fx1
Gx1
Hx1
Grommet Plate Ix1
Bolt
Monitor Plate 5/32in.(4mm) Allen Key
Jx2
Kx2
Lx1
13/64in.(5mm) Allen Key
Mx1
Bolt M4x12mm (x8)
M-A
Bolt M4x30mm (x8)
M-B
Washer D4 (x8)
M-C
Step 1A For Clamp Mounting
1A-1 Connect Connecting Plate [B] to Arm Assembly [A]
Spacer
L13mm (x8) M-D
L 03
1A-2
Secure Desk Clamp [C] to Connecting Plate [B] According to the Thickness of the Desktop
B
B
10-50mm (0.4in.-2in.)
or
50-83mm (2in.-3.3in.)
L
L
1A-3 Secure the Mount to Desktop
Step 1B For Grommet Mounting
1B-1 Secure Bottom Plate [F] and Bolt [H] to Arm Assembly [A]
L 04
1B-2 Secure the Mount Assembly to the Desktop
0.4-3.3 in. (10-83 mm)
Step 2 Attach the Monitor Plate [K] to the Monitor
Select Monitor Bolts
Only one bolt size fits your monitor.
M4
M6
Bolt length: Verify adequate thread engagement with bolts or bolts/spacers combination. We recommend thread engagement by at least 5 turns. -Too short will not hold the monitor. -Too long will damage the monitor.
Too Short
Too Long
Correct
Correct
FLAT BACK MONITOR (UNIVERSAL MONITOR PLATE)
M-A
K
M-C
ROUND BACK MONITOR (UNIVERSAL MONITOR PLATE)
K
M-B
M-C
M-D
05
Step 3 Secure the Monitors to Arm Assembly
J
The tension is preset at 4-5kg. After hanging the monitor to the mount, please release the monitor slowly to prevent it from falling suddenly
Step 4 Adjust the Gas Spring Tension
Be sure to keep the arm in
horizontal position during
adjustment. Or else, it would be difficult to adjust the mount or damage the mount.
1. If the monitor can stay at the desired height by
M
itself, no adjustment needed.
2. If the monitor rises up, press the arm to keep it in horizontal position and then use the 13/64in.(5mm) Alley key [M] to turn the bolt clockwise("-" direction) to reduce tension of the arm only until the monitor can stay at the desired height by itself.
3. If the monitor falls down, lift the arm to keep it in horizontal position and then use the 13/64in.(5mm) Alley key [M] to turn the bolt counter-clockwise("+" direction) to increase tension of the arm only until the monitor can stay at the desired height by itself.
06
Step 5 Rotation Restriction
Non-proper usage directions
Proper usage directions
Step 6 Adjustments
Tilt Adjustment
L
"+" Clockwise: Tighten "-" Counter-clockwise: Loosen
Situation 1: If the monitor can stay at the desired tilt angle by itself, no adjustment needed.
Situation 2: If the monitor can not stay at the desired tilt angle by itself, turn the bolt clockwise or counter-clockwise as shown until the monitor can stay at the desired tilt angle by itself.
07
Level and Rotation Adjustments
If needed, the TV can be levelled and rotated 360 degree
Step 7 Route the Cables Along the Arm Assembly [A]
Step 7-1 Detach the cable covers from the arm assembly [A]
M
Note: Loosen the preassembled
bolts from the covers, then pinch
the both sides of the bottom end
of the cable covers to make
them detach from the arm
M
08
Step 7-2 Route the cables along the arm assembly and secure the cable covers to the arm assembly [A]
M
M
Note: Pinch the both side of
the bottom end of the cable
covers to make them attach to the arm, then fasten the bolts
M
to secure the covers to the
arm.
09
Adobe Illustrator CC 22.1 (Windows) 3-Heights™ PDF Optimization Shell 6.3.1.5 (http://www -tools.com)