Blueair User Manual

Blue Pure Mini Max

Safety information

Product name: Blue Pure Mini Max

Model number: 3131000100

Blueair purifiers are electrical appliances for indoor use only. Take necessary precautions to reduce the risk of fire, electric shock, or injury.
Cleaning and user maintenance shall not be done by children without supervision. Always disconnect the appliance from the power supply before maintenance.
If your Blueair appliance is found to be defective, it will be replaced with the same or a similar model at no cost, per the warranty terms. Use caution when attempting repairs yourself, as this presents the danger of electrical shock or injury.
Ensure that the power cable and the power plug are not at risk of getting damaged.
If the appliance is damaged or malfunctions, turn it off, disconnect it from the power supply, and contact Blueair.
The power plug must be firmly inserted in the power socket.
When disconnecting the unit from the power supply, do not pull on the power cord; pull on the power plug.
Use the power cable provided with your Blueair air purifier to plug directly and firmly into an appropriate electrical outlet.
Do not use an extension cord or a power strip. Refer to the rating label on your appliance.
Do not use the included power cord for anything else but the appliance.
Do not allow objects to enter or block the air inlets and air outlets, as this can cause electric shock or damage the appliance.
Do not place any objects on top of or directly against the appliance.
Do not sit on, stand, climb onto, or hang from the appliance.
Keep the appliance, including the power cable, at a safe distance from heated surfaces and open fire.
Keep the appliance and power plug away from water and other liquids.
Keep the appliance and power plug away from chemicals such as pesticides and deodorants. Place the appliance on the floor. The appliance must be placed on a stable surface.
Do not use the appliance outdoors or in wet environments such as bathrooms, laundry rooms, or pool areas.

The energy efficiency of this ENERGY STAR certified model is measured based on a ratio between the model's CADR for Smoke and the electrical energy it consumes, or CADR/Watt. Blue Pure Mini Max air purifier is an electrical appliance for indoor use only. Take the necessary precautions to reduce the risk of fire, electric shock, or injury.

Product map

User interface

Air outlet

Fan motor

Noise shield

Particle & carbon filter

Washable fabric pre-filter

[Diagram of the air purifier's internal components with labels A through F]

Getting started

Indicators

1 ON/Standby button
2 Fan Speed button
3 Night mode (lowest speed setting)
4 Speed 2
5 Speed 3
6 Filter replacement

[Diagram showing the top of the air purifier with numbered indicators and buttons]

Two button control

Press the ON/Standby button to turn the air purifier on.

Adjust the mode and the fan speed using the Fan Speed button.

This air purifier has a total of three fan speeds: Night mode is the lowest/most silent, and Speed three is the highest.

Night mode: Lowest fan speed and fully dimmed lights.

Fan speeds 1-2-3: Fan speed levels that can be manually set by pressing the Fan Speed button on the interface.

How to use tips

Filter reset

Extra long press Fan Speed button for about 15 seconds (until all the LEDs of the interface light up). Then release.

After replacing the filter, it is required to manually conduct filter reset on the appliance. If done correctly, the red filter replacement indicator will blink three times and then disappear.

⚙️ 15 seconds

Enable/disable Child lock

Long press ON/Standby button for about 5 seconds (until all the LEDs of the interface light up and blink once). Then release.

When the Child lock is on, the air purifier will continue to operate, but the speed/mode button will be locked.

? 5 seconds

Maintenance information

Important! Turn the air purifier off and disconnect it from the power supply before maintenance.

Changing your filter

When your air purifier's indicator light turns red, it's time to change the main filter. This typically occurs at 6 months of active operation.

Step 1: Turn off the air purifier and unplug it. Rotate the top counter-clockwise to unlock, then lift up to remove it.
Step 2: Remove the fabric pre-filter and the noise shield.
Step 3: Use the filter handles to pull out the old filter and replace with new. Make sure to remove plastic wrapping before inserting the new filter in the appliance.
Step 4: Place the noise shield back on top of the filter. Pull up the fabric pre-filter over the filter and the noise shield. (Ensure that the leather tag is on the upper side of the fabric pre-filter.)
Step 5: Twist the top back on and plug in the air purifier.
Step 6: Important! Turn the air purifier back on and reset the filter indicator by pressing down the Fan Speed button for 15 seconds (until all the LEDs of the interface light up for the second time and blink once). Then release.

[Diagram illustrating the filter replacement steps]

Cleaning your washable pre-filter

Clean your pre-filter regularly when you see dust or dirt. Vacuum the exterior of the fabric with a soft brush attachment. If the pre-filter requires a deeper clean, wash according to the instructions on the pre-filter's label. Hang to dry.

Step 1: Turn the air purifier off and unplug it. Rotate the top counter-clockwise to unlock and remove it.
Step 2: Remove the fabric pre-filter from the noise shield and main filter.
Step 3: Wash according to instructions on the fabric pre-filter's label.
Step 4: Pull the clean pre-filter back over the noise shield and main filter.
Step 5: Please ensure that the leather tab of the pre-filter is on the upper part.
Step 6: Push the top cylinder down, rotate it clockwise to lock it.

Disposal and recycling

This air purifier should be recycled as electronic waste. If you have any questions regarding the disposal of this air purifier, please contact your local waste management for the best way to recycle.

Troubleshooting

Issue	Potential Cause	Try this
There is a red circle on my air purifier's panel.	It is time to change the main filter.	1. Change filter according to the instructions in this guide. 2. Reset the filter life timer: press down the fan speed button until the red light disappears (15 seconds).
My air purifier is making too much noise.	Air purifiers that are set on a high-speed level produce more noise because they function at faster rates. The plastic sealing is still on the filter.	Set a lower fan speed. The air purifier should be quieter. 1. Remove the main filter according to the instructions in this guide. 2. Make sure that the plastic cover is removed from the filter.
If the main filter or pre-filter are clogged or dirty, the engine might not get sufficient airflow, which may result in increased noise levels.		Unplug your air purifier and vacuum the air purifier and its fabric pre-filter from the outside with a soft brush attachment. Clean the fabric pre-filter in the washing machine. Replace the main filter when your filter indicator turns red.
I cannot change the fan speed modes on my air purifier.	The Child lock function is activated, which means that the fan speed modes can only be controlled from the Blueair app.	To deactivate the Child lock: Press the ON/Standby button on your air purifier for 5 seconds or, deactivate the Child lock from the Blueair App.
My indoor air quality is not improving.	Indoor air quality is polluted. Air quality sensors are dusty and showing incorrect levels.	1. Disconnect the power cable from the wall outlet and wait approximately 30 seconds. 2. Make sure that there are no objects or dust around the air quality sensors at the back of the air purifier. 3. Reconnect the power cable. 4. Press the power button. If the air quality does not improve with the use of the air purifier and with ventilation, please contact Blueair.
My air purifier does not start or fails to operate.	The power cable is not fully inserted.	1. Turn off and unplug your air purifier. 2. Make sure there are no objects or dust on and around the air purifier. 3. Ensure the top of the air purifier is correctly attached to the bottom. 4. Plug the power cable firmly into an outlet. 5. Press the On button and select a speed level. 6. Make sure the LED indicators on the air purifier are lighting up. 7. Make sure the airflow is working (feel with your hand that air is coming out from the air outlet). If your device still fails to operate, please contact Blueair.
The LEDs on my air purifier are too bright.	The LEDs are on the maximal brightness setting.	Several LED dimming options are available on your air purifier: Select the Night mode on your air purifier, or set your LED brightness preferences from your air purifier according to the instructions in this guide.

For more information and troubleshooting tips, please check the Support page on www.blueair.com.

	Blueair Blue Pure Mini Max User Manual User manual for the Blueair Blue Pure Mini Max air purifier, including safety information, product map, getting started guide, usage tips, maintenance, troubleshooting, and disposal.
	Blueair Blue Pure Mini Max User Manual User manual for the Blueair Blue Pure Mini Max air purifier, covering safety information, product map, getting started, how to use tips, maintenance, and troubleshooting.
	Blueair Blue Pure Mini Max User Manual User manual for the Blueair Blue Pure Mini Max air purifier, covering safety information, product map, getting started, maintenance, troubleshooting, and disposal.
	Blueair Blue Pure Mini Max User Manual - Air Purifier Guide Comprehensive user manual for the Blueair Blue Pure Mini Max air purifier. Learn about safety, setup, maintenance, and troubleshooting for your device.
	Blueair Blue Pure 211i Max User Manual Comprehensive user manual for the Blueair Blue Pure 211i Max air purifier, covering safety information, product features, operation, maintenance, troubleshooting, and app connectivity.
	Blueair Bonus Filter Promotion: Terms and Conditions Details of the Blueair Bonus Filter Promotion, offering a free replacement filter with the purchase of eligible Blueair air purifiers. Includes applicable models, promotion dates, redemption instructions, and full terms and conditions for Australian residents.
	Blueair Blue Pure 411a Max User Manual Comprehensive user manual for the Blueair Blue Pure 411a Max air purifier, covering safety information, product features, operation, maintenance, and troubleshooting.
	Blueair Blue Pure 211i Max User Manual User manual for the Blueair Blue Pure 211i Max air purifier, covering safety information, product features, getting started, usage tips, app connectivity, maintenance, and troubleshooting.