Instruction Manual for bulbeats models including: B0CGX9GY4C Smart RGB Floor Lamp with Remote, B0CGX9GY4C, Smart RGB Floor Lamp with Remote, Lamp with Remote

bulbeats Smart RGB Floor Lamp with Remote, Dimmable Gold Stanging Lamp with Tray, 9W E26 LED Bulb Included, Color Changing Modern Tall Lamp for Living Room, Bedroom Rgb-gold

‎1 User Manual (PDF) bulbeats bulbeats bulbeats,Smart,RGB,Floor,Lamp,with,Remote,,Dimmable,Gold,Stanging,Lamp,with,Tray,,9W,E26,LED,Bulb,Included,,Color,Changing,Modern,Tall,Lamp,for,Living,Room,,Bedroom,B0CGX9GY4C,B0BJ2BSS5Y,B0BJ29MV9K,B0B9NG76SF,B0BK98ZNVV,B09Q88QHV7,B0BS6MJNMM,B0CFL388CB,B0CBKNVDQ8,B0BTD8KLY9,B09ZQJJ2L4,B0BJ2DN2VW

INSTRUCTION MANUAL

1 day ago — Easy to install, no tools needed, assembly the products following instructions. ASSEMBLY INSTRUCTIONS. 1. Screw Tube (A) clockwise into Tube (B) until secure; ...

PDF preview unavailable. Download the PDF instead.

813wyUyUnsL
INSTRUCTION MANUAL
LED Floor Lamp
Installation Guide
IMPORTANT: Read all safety precautions and installation instructions carefully before installing Do not handle any energized fixture or attempt to energize any fixture with wet hand or
while standing on a wet or damp surface or in water. The fixture is designed for use in 120VAC, 60Hz fused circuit. Do not use on a dimming circuit.  Easy to install, no tools needed, assembly the products following instructions.
ASSEMBLY INSTRUCTIONS
1. Screw Tube (A) clockwise into Tube (B) until secure; pull any excess cord through Tube (B).
2. Repeat Step 1 for Tubes (C),(D). 3. Screw Tube (D) clockwise into Base (E) until secure; pull any
excess cord through Tube (D).
4. Unscrew the lamp holder nut counterclockwise, and is Install glass cover, tighten lamp holder nut clockwise.
Note: The glass cover is fragile, please don't knock it.
5. Install the tray As shown in the picture, pass the wire through the wire groove and M10 screw between Tube (B) and Tube (C), tighten the (B) and (C) tube clockwise.
Note: Install the tray with the arc side up
1/2

6.Correct installation angle of lamp pole and chassis.
7.Tighten the existing bulb clockwise. Note: Do notover-tighten, The glass cover is fragile, please don't knock it.
8. Foot Switch: control lamp ON/OFF. Foot Switch
Guarantee
If your product does not arrive in good condition or does not work great 100%Satisfaction Guarantee within 3 years, please let us know we will give you replacement or refund. Customer service: bulbeats.cs@hotmail.com
2/2


WPS 文字