SERA RK24WTKD Bathroom Cabinet Installation Instructions

Before You Begin

Please read these instructions carefully to familiarize yourself with the required tools, materials, and installation sequences. Follow the sections that pertain to your particular installation. This will help you avoid costly mistakes. In addition to proper installation, read all operating and safety instructions.

All information in these instructions is based upon the latest product information available at the time of publication. SERA reserves the right to make changes in product characteristics, packaging, or availability at any time without notice.

These instructions contain important care and cleaning information. Please leave these instructions for the consumer.

This product complies with GB 24977-2010.

Safety Warnings

The products are precision-engineered and should give continued superior and safe performance, provided:

1. They are installed, commissioned, operated and maintained in accordance with the recommendations given in this Manual.
2. Periodic attention is given, as necessary, to maintain the product in good functional order.

⚠️ Carefully inspect the new fixture for any signs of damage.

When installing Products, manufacturers guidelines for power tool safety should be followed.

Tools and Materials Required (Not Supplied)

• ? Drill
• ? Spirit level
• ? Drill bit (Φ8)
• ? Ruler
• ✏️ Pencil
• ? Glass drill (Φ8)
• ? Screwdriver
• ? Silicon sealant
• ? Masking tape

Parts List

After unpacking, please confirm the parts and quantity according to the following. (Please check the standard accessories and choose one of the following installation methods according to the accessories.)

Main Components:

• Part A: Drawer base component
• Part B: Drawer base component
• Part C: Top panel
• Part D: Right side panel
• Part E: Door
• Part F: Back panel support
• Part G: Support
• Part H: Support
• Part I: Back panel support
• Part J: Front panel
• Part K: Back panel support
• Part L: Drawer runner support
• Part M: Back panel support
• Part N: Left side panel
• Part O: Drawer base component
• Part P: Drawer front
• Part Q: Drawer side
• Part R: Drawer side
• Part S: Drawer base
• Part T: Drawer back
• Part U: Drawer base component
• Part V: Drawer side
• Part W: Drawer side
• Part X: Drawer back
• Part Y: Drawer front

Hardware & Accessories:

• H1: 10*48*30
• H2: Various screws/bolts (e.g., H2*6, H2*14, H2*20, H2*16)
• H3: Various screws/bolts (e.g., H3*12, H3*10, H3*34, H3*16, H3*20, H3*35, H3*36)
• H4: Various screws/bolts (e.g., H4*5, H4*14, H4*6, H4*12, H4*20, H4*16)
• H5: Various screws/bolts (e.g., H5*4, H5*8, H5*2, H5*5, H5*10, H5*12, H5*30)
• H6: Hinges (H6*2)
• H7: Various screws/bolts (e.g., H7*2A, H7*2)
• H8: Screws (H8*4)
• H9: Bolts (H9*2)
• H10: Hinges/Brackets
• H11: Brackets (H11*2)
• H12: Legs (H12*4)
• H13: Wall anchors (H13*4)
• H14: Screws (H14*4)
• H15: Screws (H15*1)
• H16: Screws (H16*3)
• H17: Screws (H17*3)

Stand-by Spareparts:

• H2: 2x
• H3: 2x
• H5: 2x

Installation Instructions

Step 1: Assemble Side Panels and Base

Attach Part C (top panel) to Part N (left side panel) using screws H7*2A and H5*4 (x2). Ensure correct orientation as shown in the diagram.

Attach Part D (right side panel) to Part N (left side panel) using screws H3*12.

Attach Part F (back panel support) to Part J (front panel) using screws H3*10.

Step 2: Assemble Main Frame

Attach Part L (drawer runner support) to Part J (front panel) using screws H4*5 and H2*6.

Attach Part K (back panel support) to Part J (front panel) using screws H4*14 and H2*14.

Connect the main frame components: N, J, M, I, D, F, K. Ensure all parts are aligned correctly before securing.

Step 3: Add Supports

Attach Part G (support) to the assembled frame using screws H9*2.

Attach Part H (support) to the assembled frame using screws H4*6 and H2*6.

Step 4: Attach Top Panel

Attach Part J (front panel) to the frame using screws H7*2 and H5*4 (x2).

Secure Part C (top panel) to the top of the assembled frame using screws H2*12 and H4*12.

Step 5: Attach Hinges and Legs

Attach hinges H11*2 to Part D (right side panel).

Attach hinges H10*2 to Part C (top panel).

Attach additional hinges (H5*10 x2, H5*5 x2) to Parts C and D as indicated.

Attach Part H15*1.

Attach the legs (H12*4) to the bottom of the cabinet.

Step 6: Assemble Drawers

Assemble drawer components A, P, Q, R, S, T, O using screws H3*20, H17*3, H4*20, H2*20.

Assemble drawer components B, U, V, W, X using screws H3*16, H4*16, H2*16.

Step 7: Insert Drawers and Attach Runners

Insert the assembled drawers (A and B) into the cabinet.

Attach drawer runners/slides to the cabinet and drawers using H8*4 screws. Ensure the correct orientation for smooth operation (e.g., slides marked 'X+' and 'X-' indicate left and right sides respectively).

Step 8: Attach Doors and Adjust

Attach doors E to the cabinet using the pre-installed hinges.

Door Adjustments:

The doors can be adjusted vertically, horizontally, and in depth using the screws on the hinges. Follow the diagrams to make fine adjustments for proper alignment and closure.

• Vertical adjustment: Move the door up or down.
• Horizontal adjustment: Move the door left or right.
• Depth adjustment: Move the door closer to or further from the cabinet frame.

Step 9: Secure to Wall

Use wall anchors H13*4 to secure the cabinet to the wall for stability and safety. Follow local regulations for wall mounting.

Step 10: Install Countertop/Sink

Apply silicone sealant to the top edge of the cabinet where the countertop will rest.

Place the sink/countertop onto the cabinet.

Secure the sink/countertop using screws H14*4.

User Maintenance

To extend the life of the product, perform daily maintenance. The following methods are for reference only.

• ⚠️ Keep the cabinet away from water, which will cause deformation and damage.
• ❌ Do not put lit cigarettes on the counter or basin, which will cause discoloration.
• ❌ Do not pour acid or alkaline solutions into the basin, which will cause discoloration, leak, or damage.
• ❌ Avoid direct sunlight, which may cause deformation and discoloration.
• ❌ Avoid heat, which will cause deformation and discoloration.
• ❌ Do not pour hot water into the basin, which may cause damage.
• ❌ Avoid using nylon brushes, toilet cleaners, or hydrochloric acid cleaners, which will cause damage.
• ❌ Avoid dropping hard objects into the basin, which may cause damage.

Daily Maintenance Tips:

• Dry the cabinet immediately with a clean, soft cloth when it encounters water.
• When the product is stained with dirt, wipe the cabinets clean with a soft, damp cloth, apply appropriate cleaners, and dry immediately with another clean, soft cloth.
• The water supply pipes, drainage pipes, and connection parts are prone to water leakage. Please check these parts regularly to avoid accidents due to water leakage.
• After a period of use, dirt may accumulate on the drain plug, affecting drainage. The plug should be cleaned regularly.