NETGEAR N150 Wireless Router Installation Guide

Installation Guide for NETGEAR models including: N150 Wireless Router, N150, Wireless Router, Router

NETGEAR N150 WNR1000V3 (01) PDF MANUAL - Manual-Hub.com

File Info : application/pdf, 2 Pages, 1.32MB

NETGEAR N150 WNR1000V3 (01)

N150 Wireless Router
WNR1000v3
Package Contents:

Installation Guide

N150 Wireless Router

Router stand

Ethernet cable

Power adapter

Attach the stand to the router:
1. Place the stand on a level surface. 2. Slide the router onto the stand.

Step 1:
Unplug the power to turn off your modem.

Internet

DSL or cable
Power On/Off
Modem

Step 3:
Plug in, then turn on your modem.
Wait about 2 minutes until your modem turns on.
If your modem has a battery backup, first remove and reinsert the battery before connecting your modem to power.
https://manual-hub.com/

Step 2:
Connect one end of the yellow Ethernet cable to your modem and the other end to the Internet port.

(not included)
Power On/Off
N150 Wireless Router
Step 4:
Connect the power adapter to the router and plug it into an outlet. Wait for the Wireless LED ( ) to light.
If no LEDs light, make sure the Power On/Off button is in the on position (pushed in).

Laptop or desktop computer
Step 5:
Connect your computer to the router.
Use an Ethernet cable (not included) to establish a wired connection. Or connect wirelessly by using the preset wireless security settings located on the bottom label.
Step 6:
Open a web browser.
Your browser automatically connects to your router so you can set it up. See the instructions on the other side.

Preset Wireless Security
This product has a unique WiFi network name (SSID) and network key (password). The default SSID and password are uniquely generated for every device (like a serial number), to protect and maximize your wireless security. This information is located on the label on the bottom of the product. NETGEAR recommends that you do not change the preset SSID or password. If you do change the settings, the information on the bottom of the product does not apply.
Find the preset wireless settings on your router and record them here: WiFi network name (SSID) _______________________________ Network key (password) ________________________________
If you change the preset wireless settings, record them here: Wireless network name (SSID) _______________________________ Network key (password) _____________________________________
If necessary to retrieve or update your password, type http://www.routerlogin.net in a web browser and log in using the default user name (admin) and password (password). Select Wireless Settings to locate your wireless password.

Connect Wireless Devices to Your Router
Choose either the manual or WiFi Protected Setup (WPS) method to add wireless computers, and other devices to your wireless network.

Manual Method
1. Open the software utility that manages your wireless connections on the wireless device that you want to connect to your router (iPhone, laptop, computer, gaming device). This utility scans for all wireless networks in your area.
2. Look for the preset NETGEAR wireless network name (SSID), and select it. The SSID is located on the product label on the bottom of the router.
Note: If you changed the name of your network during the setup process, look for that network name.
3. Enter the preset password (or your custom password if you changed it), and click Connect.
4. Repeat steps 13 to add other wireless devices.

WPS Method

If your wireless device supports WPS (WiFi Protected Setup)--NETGEAR calls this method Push 'N' Connect--you might be prompted to press the WPS button on the router instead of entering a password. If this happens:

1. Press the WPS button

on the router.

2. Within 2 minutes, press the WPS button on the client device, or follow the WPS instructions that came with your wireless device to complete the WPS process. The device will then be connected to your router.
3. Repeat this process to add other WPS wireless devices.

Note: WPS does not support WEP security. If you try to connect a WEP client to your network using WPS, it will not work.

August 2014

https://manual-hub.com/

Troubleshooting
The browser cannot display the web page. · Make sure that the computer is connected to one of the four LAN Ethernet ports,
or wirelessly to the router. · Make sure that the Wireless LED it lit. · Close and reopen the browser to make sure that the browser does not cache the
previous page. · Browse to http://routerlogin.net. · If the computer is set to a static or fixed IP address (this is uncommon), change it
to obtain an IP address automatically from the router.
NETGEAR recommends that you use only the official NETGEAR support resources.
Support
Thank you for purchasing this NETGEAR product.
After installing your device, locate the serial number on the label of your product and use it to register your product at https://my.netgear.com. You must register your product before you can use NETGEAR telephone support. NETGEAR recommends registering your product through the NETGEAR website. For product updates and web support, visit http://support.netgear.com. NETGEAR recommends that you use only the official NETGEAR support resources.
You can get the user manual online at http://downloadcenter.netgear.com or through a link in the product's user interface. For the current EU Declaration of Conformity, visit http://support.netgear.com/app/answers/detail/a_id/11621/. For regulatory compliance information, visit http://www.netgear.com/about/regulatory/. See the regulatory compliance document before connecting the power supply.
Get the genie app.
Download the free genie app from www.NETGEAR.com/genie. Easily share media, files, and printers on the network from your smartphone, tablet, or laptop.
NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject to change without notice. © NETGEAR, Inc. All rights reserved.

References