User Manual for AEi models including: SGR-9206-S, SGR-9106-S, SGR-9206-SM, SGR-9106-SM, SGR-9206-S Sip Dect Phone, SGR-9206-S, Sip Dect Phone, Dect Phone, Phone
AEI SGR-9106-S – Single-Line IP Corded Speakerphone | GPO Retro
AEI SGR-9106-SM – Single-Line IP Corded Speakerphone (master) | GPO Retro
AEI SGR-9206-SM – Dual-Line IP Corded Speakerphone (master) | GPO Retro
SIP DECT Phone SGR-9206-S / SGR-9106-S SGR-9206-SM / SGR-9106-SM QIG V 1.02 Fo r sin g le Et h er n et m o d els 1 Over view This phone is a full-feature telephone that provides voice communication. Read this QIG carefully to learn how to operate this product and take advantage of its features. Package Contents When unpacking the phone, ensure all the following items are present and undamaged. If anything appears to be missing or broken, contact your dealer for a replacement. 1. Base Unit 2. Handset 3. Stand 4. AC Adaptor (Optional) 5. RJ-45 Cable 6. Quick Installation Guide (This document) 2 Product Description The following contains important information to help you familiarize with the functions of the analog phone. Front View Name 1 Message waiting indicator 2 Display screen 3 Speed dial keys 4 LINE 1 / LINE 2 5 End key Description To indicate an incoming call or unread messages. To display calls and status information. Press to dial the preset number. To indicate a line been used as the following status: - Idle: No LED indication. - In call: Red LED. - In on-hold call: Blinking red LED. Press to end a phone call Name Description 6 Alphanumerical keys Press these keys to enter phone numbers or texts. 7 Function keys HOLD (two line model only) Press to put an active call on hold. MUTE (single line model only) Press to mute MIC. SPEAKER Press to activate the speakerphone for hands free conversations. VOLUME Press to increase or decrease the volume of the ringer tone, handset, or speakerphone. Back View NO. Name 1 LAN port 2 DC jack Description Connects to HUB, ADSL, or Switch(PSE) Connects to AC power adapter. (Optional. While base unit is not powered via a PSE) Connecting the Phone The following illustration shows how to connect the power ports of phone. The following illustration shows how to install the phone and stand. The following illustration shows how to install the handset and battery. 3 Operations Answering a Call An incoming call is indicated by a ringing tone and a flashing indicator at the top of base units. You can answer the call by doing one of the followings: Pick up the handset to answer the call. Press the Line (Line1/Line2) key to answer the call. Making a Call Dialing with the Keypad Enter the telephone number with the alphanumerical keypad and the call will start automatically. Using the Speed dial keys You can use the 6 pre-assigned speed dial hotkeys, to configure the most commonly dialed numbers. Use the function to dial a number quickly, instead of keying in a complete number. To call a number using speed dialing, follow the steps below: Press the speed dial hotkey that has been pre-assigned to the phone number and the call will start automatically. Call Options While a call is in progress, a number of additional options are available. Using the Speaker Phone For hands free operation, you can use the built-in speaker to talk on the phone. To use the speakerphone, follow the steps below: While talking on the phone, press the SPEAKER key on the phone to enable the Speakerphone function. Press SPEAKER key again to terminate the call. Putting a Call on Hold (two-line model only) You may want to put a call on hold temporarily while doing some work or attending to a second incoming or outgoing call. To put a call on hold, do one of the following: Press the HOLD key on the phone to put the call on hold. When you receive a second call, press the next available LINE key to attend to the new call, and the first call will be put on hold automatically. Mute a Call (single-line model only) You may need to mute MIC temporarily during a call, do one of the following: Press the MUTE key on the phone to mute the microphone. Press the MUTE key again to unmute microphone. Checking Voice Messages If the message waiting indicator at top of handset or base unit lights up in red, it indicates that there are one or more new messages in voicemail box. Press the MESSAGE key on the phone to retrieve voice messages. (An external ITSP or PBX must support voice message feature. And you need to set a voice message code before using the voice mail feature.) 4 Support To configure through the web browser, do the following: Ensure the phone is powered up and connected to a DCHP network Press *112*113 and then "LINE 1" (for 2-line phone) or green button (for 1- line phone) on the cordless handset, the IP address is displayed on the LCD screen. Open your browser (such as Internet Explorer, Firefox, etc.) and type in the web address of the phone. For example, if the IP address you obtain in step 4 above is 192.168.1.2, enter the web address: http:// 192.168.1.2:8000. When the Web login front page is displayed. Enter the user name and the password and click Login. The administrator's user name and password are "admin" and "1234" respectively. For technological support, please email to support@aeicommunication.com.Microsoft Office Word 2007 Microsoft Office Word 2007