PR300 WIFI User Manual
For Apple phones: Search for "WIFI Hunting Camera" in the APP store, download, and install it.
For Android phones: Search for "WIFI Hunting Camera" in the Android market, download, and install it.
Please scan the following two-dimensional codes to download and install the application:
(QR code for iOS)
(QR code for Android)
Important Reminders
Before powering on, the camera must have a memory card inserted and 18650 batteries installed.
Inserting Memory and Batteries
Memory Insertion and 18650 Battery Installation Methods:
[Diagram showing memory card insertion and battery placement with '+' and '-' indicators]
The indicator light will flash 6 times upon switching on the camera, entering PIR detect mode. The camera will capture photos or videos when PIR detects humans or animals.
WIFI Remote Control:
WIFI switch OFF
WIFI switch ON
Connecting to WIFI
Long press the red switch on the remote. The remote's indicator light will flash quickly until the camera's indicator red light also flashes quickly. At this point, you can enable WIFI on your phone and connect to the hot spot named "PR300WIFI" with the password "12345678". The camera's indicator red light will remain brightly lit when connected to the phone's WIFI hot spot. Open the APP, click the camera icon [camera-icon], and you can view the real-time picture from the camera on your phone. The camera's indicator red light will then turn off.
You can set the camera's parameters and view or download photos and video files.
To exit the APP, press the gray switch on the remote once. The camera's indicator red light will flash 6 times and then go out, and the camera will enter PIR detect status.
APP Interface and Settings
[Screenshot of the WIFI Hunting Camera APP interface showing network connections and camera view]
Settings Menu:
- Mode: Photo/Video
- Image Size: 24MP
- Sampling: 2 Photos
- Resolution: 1080P
- Record Time: 00:12
- PIR Interval: 00:10
- PIR Sensitivity: High
- IR LED: Auto
- Time Lapse: OFF
- Timer Mode: OFF
- Record Audio: ON
- Date Format: 24H
- Date Stamp: ON
- Camera Name: Huntercam
- WIFI OFF: 3 Minutes
- SD Card Format: Yes/No
- Default Settings: Yes/No
- Free Space: 14.90
Other Settings:
- Timer 2 Start
- Timer 2 End
- Record Audio: On
- Date Format: 24H
- Date Stamp: On
- Camera Name: Huntercam
- WIFI OFF: 3 Minutes
- SD Card Format: Yes
- Default Settings: Yes
- Free Space: 14.90
[Off WiFi Button]
[On WiFi Button]
Camera Parameters
- Sensor: 5MP Color CMOS
- Mode: Photo, Video, Photo+Video
- Image Size: 24MP, 20MP, 16MP, 12MP, 8MP, 5MP, 3MP, 2MP
- Sampling: 1-10 photos
- Video Resolution: 1296P, 1080P, 720P, WVGA, VGA
- Record Time: 0-3 Minutes; 0-59 seconds
- PIR Interval: 0-59 minutes; 0-59 seconds
- PIR Sensitivity: H, M, L
- IR LED: Auto, Best, ECO, 46pcs 940nm
- Time Lapse: OFF, ON
- Timer Mode: OFF, ON
- Record Audio: OFF, ON
- Date Format: 12H, 24H
- Date Stamp: OFF, ON
- Camera Name: Customizable
- WIFI OFF: 1-3 Minutes
- SD Card Format: Yes/No
- Default Settings: Yes/No
- Free Space: (Depending on SD card capacity), Max support: 128GB
- Power: 2pcs 18650 batteries
- Standby Time: 8 months
- Weight: 300g
- Size: 135*93*56mm
- Waterproof: IP54
- Certificate: CE, FCC, ROHS