User Manual for KRISTALLUM models including: DP382, DP382 Mbolyeer Front and Backlit LED Bathroom Mirror, Mbolyeer Front and Backlit LED Bathroom Mirror
User Manual. Manufacturer：Guang Dong Kosmo Smart Home Devices Co., Ltd. Address: No. ... Please read all instructions carefully before assembling the item.
2 days ago — Anti-fog Switch: After connecting the power, the anti-fog function is already turn on automatically. If you don't need to use it, just touch it to turn it ...
Mbolyeer Front & Backlit LED Bathroom Mirror User Manual ManufacturerGuang Dong Kosmo Smart Home Devices Co., Ltd. Address: No. 65, Linhai North Road, Shatian Town, Dongguan City, Guangdong Province, China Before Installation Meaning of LED Lights Please Note Before Installation: 1. Please read all instructions carefully before assembling the item. 2. After opening the package, first check if there is transit damage or missing parts. 3. Please power the mirror with plug to test the mirror and each functions before installation. 4. Assembly by two or more adults is highly recommended. 5. Disconnect power before installing, adding or changing any components. State of LED Light White Light ON Blue Light ON Light OFF Meaning Function is Working Function Standby Power OFF Troubleshooting 6. Ensure that the fixing location is able to take the weight of the complete fitting. 7. Keep the voltages between 110V and 120V. If the voltage exceeds 120V, please use transformer. LED doesn't turn on / Defogging doesn't work 8. To connect the wires to electrical junction box, a qualified technician or electrician is highly recommended. 9. Before cleaning the mirror, make sure that the power supply is disconnected. Part of light strip is fault Open the cover of the power supply on the back of the mirror to test the power cables, tighten the cables if they are loose. ( Please cut off the power first before testing the power supply and cables) Firstly, please pull the outer silicone strip away and press the inner light strip inward. If it still doesn't work, need replace the strip light. After using for a few month, the light doesn't work. Please contact us to replace the power supply. 01 06 Installation Instruction Check Functions Knock the nail in. 1. Tighten the screw to ensure the wall bracket stay sturdy on the wall. 2. Hang the mirror on the wall bracket . When installing, pay attention to follow the direction of the switch (easier to operate) to install. Turn on the power switch. Before installation, please check to make sure these functions work properly: Anti-fog Switch: After connecting the power, the anti-fog function is already turn on automatically. If you don't need to use it, just touch it to turn it off, to prevent wasting energy. The defogging will take effect within 10 minutes after its turned on , so you can turn it on 10 minutes before taking a bath. Dim Switch: The led light supports 10% to 100% brightness adjustment, just long press the button. This button has memory function, the next time you open the mirror it will be in the same brightness it was in before it was last closed, which means that you don't have to touch the button each time. Color Temperature Switch: The front and back lights all have three color temperatures that can be switch (3000K / 4000K/ 6000K ), just need to short press this button. And this button has a memory function as well. 05 02 User Manual Installation Instruction Method 1: Plug in Method 2: Hardwire PACKAGE CONTENTS Anti-fog switch Dim Switch Color Temperature Switch Bracket x2 Wall Anchors x5 Screws x5 Plug LED Mirror YOU MAY NEED THESE TOOLS Insert the plug into the socket, keep the voltages between 110V and 120V. If the voltage exceeds 120V, please use transformer. Cut the plug, connect the same color wire and tighten them(Disconnect power before hardwire). Draw a straight line with a ruler to keep the mirror horizontal. Drill 2 holes or 4 holes according to screws you received. 03 04WPS 文字