Connects2
User Manual for CONNECTS2 models including: 541C51BM07 CT51-BM07 Amplifier Interface, 541C51BM07, CT51-BM07 Amplifier Interface, Amplifier Interface
Connects2 CT51-BM07 Amplifier Interface Retains factory amplifier in select 2004-14 BMW vehicles at Crutchfield
File Info : application/pdf, 2 Pages, 326.95KB
DocumentDocumentCT51-BM07 Amplifier Retention Adapter for BMW Vehicles IN THE KIT · Universal Wiring Harness · Fibre Optic Retention Interface APPLICATION Note: Application data is subject to change at any time BMW 1-Series (E81/82/87/88) BMW 3-Series (E90/91/92/93) BMW 5-Series (E60/61) BMW X6 (E71) 2004 - 2013 2005 - 2012 2004 - 2010 2008 - 2014 Note: this interface is for use with amplified vehicles only. FEATURES · Aids in the installation of a double DIN aftermarket stereo · Allows the retention of the vehicles original audio over fibre optic network · Can be used with any aftermarket harness DISCLAIMER The information provided in this document is subject to change without notice due to manufacturer changes and/or improvements to the product/s. This instruction manual is based on documented data and research. The manufacturer of this product cannot be held responsible for any changes made to the vehicle by the manufacturer or damages that may occur through the installation of this product in accordance with the steps outlined herein. CT51-BM07_IG_v1 ABOUT PRODUCT The CT51-BM07 is an amplifier retention adapter for select BMW vehicles. By utilising the BMW amp retention interface along with the universal harness, you are able to retain the vehicles audio when upgrading to an aftermarket radio. Please note: this product is for use on vehicles that have fibre optic amplified systems. CONTENTS · Fibre Optic Retention Interface · Universal Wiring Harness · Instructions PRIOR TO INSTALLATION Read the manual prior to installation. Technical knowledge is necessary for installation. The place of installation must be free of moisture and away from heat sources. Please ensure that the correct tools are used during the installation to avoid damage to the vehicle or product. Connects2 can not be held responsible for the installation of this product. WIRING GUIDE Flying Wires Black - Ground Red - Amp Turn On Yellow - 12V+ Battery RCA's Red - Audio In (R) White - Audio In (L) LEFT IN RIGHT IN ACC BAT +12V GND Fibre Amplifier Connector Firstly remove dust cover from interface Then connect fibre amplifier connection from vehicle to interface TECHNICAL SUPPORT Connects2 want to provide a fast and suitable resolution should you encounter any technical issues. With this in mind, when contacting Connects2, try to provide as much Information as possible. This will speed up the process and help us to help you. Please use our dedicated online technical support centre: support.connects2.com 2 CT51-BM07_IG_v1