SYMFONISK Speaker: Quick Guide and Safety Information

Quick Guide

Setup:

1. Plug in your SYMFONISK speaker.
2. Download the Sonos S2 app from the Apple App Store (iOS) or Google Play Store (Android).
3. Install and open the Sonos S2 app. Follow the on-screen instructions to set up your SYMFONISK speaker.
4. If you already have a Sonos system, open the Sonos app, plug in your SYMFONISK speaker, and navigate to Settings (gear icon) > System > Add Product. Follow the app's instructions to add your new speaker.

Speaker Functions:

• Play/Pause: Press once to start or stop music. Press twice to skip to the next track. Press three times to go back to the previous song. Press and hold to add the currently playing music to another room.
• Status Light: Indicates the current status of the speaker. Refer to the full instruction manual for more details.
• Volume Up: (+) Press to increase volume.
• Volume Down: (-) Press to decrease volume.

Additional Information

For the full instruction manual and support materials, visit http://www.ikea.com. Select your country, search for your product, and navigate to Assembly Instructions and Manuals.

Care Instructions

To clean the speaker, wipe it with a soft, slightly damp cloth. Follow up with a soft, dry cloth.

Product Specifications

For indoor use only.

Manufacturer: IKEA of Sweden AB

Address: Box 702, SE-343 81 Älmhult, SWEDEN

Important Safety Information & Warnings

• This speaker is intended for indoor use only and can be operated in temperatures ranging from 0°C to 40°C (32°F to 104°F).
• Do not expose the speaker to wet, moist, or excessively dusty environments, as this may cause damage.
• Never use abrasive cleaners or chemical solvents, as these can damage the product.
• Wireless connectivity range may be affected by building materials and unit placement.
• Never install the product in a confined space. Always ensure adequate space around the product for ventilation.
• Do not expose the product to excessive heat, such as direct sunlight, heat sources, or fire.
• Do not place open flame sources, such as candles, on the apparatus.
• Do not attempt to repair this product yourself. Opening or removing screwed covers may expose you to the risk of electric shock.

Save these instructions for future reference.

RF Exposure Information

According to RF exposure regulations, under normal operating conditions, the end user should maintain a distance of at least 20 cm (approx. 8 inches) from the device.

FCC Compliance Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of the device.

WARNING: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Disposal Information

The crossed-out wheeled bin symbol indicates that this item should be disposed of separately from household waste. It should be handed in for recycling in accordance with local environmental regulations for waste disposal. By separating items marked with this symbol, you help reduce the volume of waste sent to incinerators or landfills and minimize any potential negative impact on human health and the environment. For more information, please contact your IKEA store.

Importer Information (Mexico)

MX

Importador/Distribuidor: IKEA Supply Mexico, S.A. de C.V., Calle Oriente 158, número 440, Piso 3, Local JD-01, Colonia Moctezuma, Segunda Sección, Alcaldía Venustiano Carranza, C.P. 15530, Ciudad de México. Tel. 55-8310-8310.

Read and follow all safety and operation instructions before using this product. For indoor use. Consult electrical specifications on the product label.