Installation Guide for HOOKE ROAD models including: BXG.6202, BXG.6202 Heavy Duty Steel Bumper, Heavy Duty Steel Bumper, Duty Steel Bumper, Steel Bumper, Bumper

ubox-huang

User Manual (PDF)

Hooke Road 09-12 Ram 1500 Front Bumper Heavy-Duty Steel Bumper w/Winch Plate & 4 LED Lights for Dodge Ram 1500 2009 2010 2011 2012 Pickup Truck, Textured Black : Automotive

BXG.6202

Hooke Road Bumper Installation Instructions | Installation Manual – Hooke Road 4x4

Hooke Road Bumper Installation Instructions | Installation Manual – Page 2 – Hooke Road 4x4

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized



File Info : application/pdf, 7 Pages, 2.20MB

Document Document

Front Bumper
(1) Contents:

BXG.6202

Qty Part Name 6 Hex Bolt
8 Hex Bolt

Size(mm) Picture M12*30
M12*35

6 Hex Bolt

M8*20

4 Button Head Socket Cap Bolts Screws

M6*20

14 Split Lock Washer

D12

6 Split Lock Washer

D8

22 Flat Washer

M12*30*2

6 Flat Washer

M8*16*1

4 Flat Washer 14 Hex Nuts

M6*12*1 M12

6 Flange Hex Lock Nuts 4 Nylon Insert Lock Nut 2 Nylon Round Spacer 2 EVA

M8 M6 M6*12*1.3

(2) Tools required:
a. Drive Socket Ratchet Wrench; b. 4mm Hex Bit Socket; c. 10mm, 13mm, 19mm Wrench; d. 13mm, 19mm Shallow Socket;
(3) Installation time:
About 1.5 hours, 2-3 people may be needed. Installation time may differ according to your mechanical skill level.
(PLEASE VERIFY ALL PARTS ARE PRESENT AND READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION!)
To view the electronic version (BXG.6202), please scan the QR code.

(4) Installation instruction:
Step 1: Reomve the factory bumper, ready to install our product.
Step 2: Glue the EVA into the main body. To assemble the wings & the main body. Use the Hex Bolts (M12*30), Split Lock Washer (D12), Flat Washer (M12*30*2), Hex Nuts (M12). Repeat the same installation in the other side.

Step 3: To install the bull bar into the main body. Use the Hex Bolts (M8*20), Split Lock Washer (D8), Flat Washer (M8*16*1.5), Flange Hex Lock Nuts (M8).
Step 4: Assemble the license plate bracket (A1, A2, A3) with the M6*20 button head socket cap bolts screw groups. And then install it into the bumper with the M6*20 button head socket cap bolts screw groups.

Step 5: To install the winch power control box bracket. Use the Hex Bolts (M8*20), Split lock washer (D8), Flat washer (M8*16*1.5), Flange Lock Hex Nuts (M8). This step isn't 100% necessary. Depends if you have the winch power control box.
Step 6: Lift up the bumper. Install the bumper into your vehicle with the Hex Bolt (M12*35), Split Lock Washer (D12), Flat Washer (M12*30*2), Hex Nut (M12).

Step 7: The installation is complete. We hope you enjoy a wonderful off-road life
with this quality Hooke Road product!
Attention:
1.The product parts in this instruction may differ slightly from the actual product contents but generally does not affect the installation of the product.
2.Please feel free to contact your distributor if you have any kind of question about your purchase.