Instruction Manual for BEOK models including: TCR8WIFI, RGB Colorful LCD Screen Smart Thermostat, TCR8WIFI RGB Colorful LCD Screen Smart Thermostat
4 févr. 2022 — Scan QR code to finish network configuration swiftly, easy and convenient. Programmable device, multiple periods allowed to set per day.
Scan QR code to finish network configuration swiftly, easy and convenient. Programmable device, multiple periods allowed to set per day. 2.8 inches ultra-large colorful LCD screen, delicate visual effect.
File Info : application/pdf, 2 Pages, 1.20MB
DocumentDocumentRGB Colorful LCD Screen Smart Thermostat 03.11 Thur 18:00 Fair 22 Humidity 68% ROOM 25.5 next enter home back Version:TCR8 1.0(04/2021) Scan QR code to finish network configuration swiftly, easy and convenient. Programmable device, multiple periods allowed to set per day. 2.8 inches ultra-large colorful LCD screen, delicate visual effect. The device can be controlled by voice through Amazon Alexa and Google Assistant Parameter Supply voltage Power consumption Temp. setting range Floor limited range On/off deviation Ambient temperature Protection level Shell material AC100~240V;50~60Hz 1W Max (Wi-Fi 3W Max) 5~95 20~90 0.5~10, Factory setting ±1 - 5~50 IP20 Anti-Flammable PC Product Overview Auto-mode Setting This series of thermostat has Floor Heating, Fan Coil, and Integrated version, meeting the requirements under different scenarios. Version Floor heating System mode Heating Model Application EP Built-in & floor sensor, floor limit sensor + Weekly programming WP A NC/NO dual-output + Weekly programming WPB A NC/NO dual-output Potential-free output + Weekly programming+ Fan Coil Heating /Cooling / Ventilation Ac2 Timer task + 2-pipe system Ac2485 Timer task + 2-pipe system + 485Modbus (optional) Ac4485 Timer task + 4-pipe system + 485Modbus (optional) Heating / Cooling / Floor heating & fan coil, weekly programming + Integrated Ventilation/Floor heating / AWY Potential-free output + Timer task + Floor heating + Heating 485Modbus (optional) + Door card (optional) When device is off, press " " to enter menu page, choose "period setting" to set parameters, then press " " to save and exit. Events Time Default value Modify Sunrise 0 6 : 0 0 Morning 0 8 : 0 0 Workdays Nooning 1 1 : 3 0 Afternoon 1 2 : 3 0 Evening 1 7 : 0 0 Temperature Default value Modify 2 0 15 15 15 22 Rotate handwheel Rotate handwheel Display Symbols Night 2 2 : 0 0 15 Time Display Date Week Outdoor temp. Humidity Fan Col valve Floor Heating valve Mode Menu Power on/off Fan Speed 03.11 Thur 18:00 Fair 22 Humidity 68% ROOM 25.5 next enter home back Child-lock WiFi Room Temp. Current mode Fan Auto Mode Manual Mode Temporary Mode Knob Sunrise Weekends Night 06:00 22:00 2 0 15 Advanced Setting (Usually for Professional Technicians) Choose "advanced setting" on menu page and put in password 123456 to enter advanced setting page, set parameters then press " " to save and exit. Meaning Sensor Mode Rotate handwheel Built-in Sensor Floor Sensor Built-in Control&Floor Limitation Default value IN Temperature Control Mode(Floor Heating/Integrated) Auto Mode Weekly-circled programme, up to 6 heating events can be set per day. Heating events, workdays and temperature can be separately customized based on personal routines. Manual Mode Thermostat works based on manually-set temperature, disconnecting from auto mode. Temporary Mode Thermostat works based on manually-set temperature temporarily and then shifts back to auto mode till next event. User Operation Power on/off : Long press " " to turn on/off the thermostat. Buit-in Sensor Calibration -5~5 Buit-in Max Setting Value 5~95 Floor Max Setting Value 10~95 Limitation Value 20~95 Output Jitter Control 0~5 Anti-Freeze Protection ON/OFF Linkage Mode Noninverting Inverting Inverting Inverting and Anti-Freeze closed Linkage Time Delay 0~5Min -3 50 50 35 1 OFF Noninverting 0Min Weekday Mode Monday to Friday/Monday to Saturday /Monday to Sunday/ 2-day Temp setting: Rotate handwheel" "to change setting temperature by 0.5°C. System mode: Press " " shortly to switch cooling/heating/ventilation. (Fan Coil) Press " " shortly to switch cooling/heating/ventilation/floor heating/floor heating + heating. (Integrated) Temp control mode: Press " " shortly to switch manual/auto mode. (Floor heating) Press " " shortly to switch manual/auto mode. (Integrated, floor heating) Enter menu: Press " " enter the menu interface. Child-lock: Press " " + " " for 3 seconds to activate child-lock. Boot Type Temperature Unit Child Lock Type Control Mode Cloud Region Reset All Settings Function Off/Function On/Function Saved / None Lock All All but power All/Air/Floor CN/US/EU / OFF None Floor CN / RGB Colorful LCD Screen Smart Thermostat Installation instructions Sensor failure Please select work mode of sensors correctly. When it shows E0/E1 error, thermostat will stay power-off till the error is eliminated.E0: built-in sensor is short-circuited or disconnected. E1: floor sensor is short-circuited or disconnected. Timer Task Setting (Fan Coil/Integrated) Press" "to enter the menu page. Turn the knob" ", choose "Auto Mode", and then choose "Schedule". Set the parameters by turning the knob, then press "Home" to save and exit to home page. Schedule Task Time Setting 00:00 Repeat Everyday Action OFF Dimensions (Unit: mm) Floor Heating #EP #WP #WPB #AC2 11 32.6 51 51 Integrated #AC2-485 #AC4 #WPH 11 2 4 64 66 Mounting Steps The thermostat adopt pre-guide and limited snap-fit design. It is easy to mount. 1Release front cover by inserting a head screw-driver into bottom crack. 2Insert the wires and then fix these wires with screws. Suggested wire-stripping length is 7-9mm. 3Mount backing plate into wall-cassette, put screws and then fix thermostat. Make sure that the thermostat is fixed without deformation. Suggested torque is 0.2~0.4N.m (2.0~4. 1kgf.cm). 4Re-mount the front cover via snap-fit connection. Connecting Diagram The thermostat operates in full capacity in areas with the altitude of less than 2500 above sea level. Power rating of external load should be less than or equal to 80% rated power of the thermostat in areas with altitude of 2500m to 4200m. Floor Heating # TCR8-WIFI-EP # TCR8-EP L N N1 L1 AC100~240V # TCR8-WIFI-WP # TCR8-WP # TCR8-WIFI-WPB # TCR8-WPB LN AC100~240V Normally close valve 3A Max Electro thermal actuator or electrical ball valves NTC PC1 PC2 Potential-free (Potential-free output, for WPB only) Dry contact signal to control boiler Linkage control; delay time of linkage control is adjustable PC1 PC2 LN AC100~240V Normally open Potential-free valve 3A Max (Potential-free output, for WPB only) Electro thermal actuator or electrical ball valves Dry contact signal to control boiler Linkage control; delay time of linkage control is adjustable PC1 PC2 Fan Coil # TCR8-WIFI-AC2 # TCR8-AC2 LN Potential-free AC100~240VThree-wire electrical (Potential-free output, for WPB only) ball valve with two types of control mode Electro thermal actuator or electrical ball valves Dry contact signal to control boiler Linkage control; delay time of linkage control is adjustable L N H M S OPEN CLOSE LN AC100~240V N N #TCR8-WIFI-AC2-485 #TCR8-AC2-485 Fan OPEN CLOSE H Air conditoner valve MS L 89 N Air conditoner valve Fan L AC100~240V N CARD RG A B 16 15 14 13 12 11 10 # TCR8-WIFI-AC4 # TCR8-AC4 Room card room card linkage(optional) 485A 485B (optional) N OPEN CLOSE OPEN CLOSE H M S L 89 N L heat valve cool valve Fan AC100~240V N CARD RG A B 16 15 14 13 12 11 10 Room card 485A 485B room card linkage(optional) (optional) Integrated # TCR8-WIFI-AWY # TCR8-AWY N OPEN CLOSE OPEN CLOSE H M S L 89 N Floor heating Air conditoner valve valve Fan L AC100~240V N PC1 PC2 CARD RS RG A B Linkage control; delay time of 16 15 14 13 12 11 10 linkage control is adjustable Dry contact signal NTC Room card 485A 485B (optional) to control heat pump room card linkage(optional)