6" Touchscreen Camera Monitor
USB2.0 Recording | HDMI with LUT Loop-out
User Manual
Thank you for purchasing our 6-inch Full HD touch screen monitor. Please read this manual carefully before using the unit. Have a great experience!
CAUTION
- Please avoid heavy impact and dropping the product onto the ground when moving it.
- The screen of this product is made of glass. Keep away from injury if the screen is broken.
- Keep the product away from heat sources and avoid prolonged exposure to the sun, as the LCD screen will be damaged.
- Please do NOT use chemical solutions to clean this product. Wipe the monitor with a clean soft cloth to maintain the brightness of the surface.
- There are no adjustable components inside the monitor. Please do not disassemble or repair the unit yourself to avoid product damage.
Key Features
- 6-inch 1920x1080 full HD IPS screen
- Touch screen menu operation, improving shooting efficiency
- New menu interface, more intuitive and intelligent
- HDMI 2.0 input supports up to 4K@60Hz, 3G-SDI (optional)
- HDMI supports LUT loop-out
- Support HDR monitoring: what you see is what you get
- Support 3D LUT Log to REC. 709 and user 3D LUT upload
- Includes Waveform, Histogram, False Color, Monochrome functions to help accurately expose and focus every shot.
- Stereo Earphone output
- DC 8.4V power out to power your DSLR camera or mirrorless camera
- Built-in cooler (low, medium, high) for adjustment
- Flexible power supply (DC IN 12V, F970 battery plate for F970 batteries)
CONTENTS
- Product Description
- Front + Rear
- Button / Interface Instruction
- Power Supply Way
- Mount Points
- Menu Operation Instruction
- Touch Screen Menu Operation
- MENU Wheel Menu Operation
- Function Instruction
- Menu Function
- Shortcut Menu
- Status column
- Support Formats
- Technical Parameters
- Trouble Shooting
1.1 Front + Rear
The monitor features a 6-inch touchscreen display. Key interface elements are located on the top, bottom, left, and right sides.
1.2 Button / Interface Instruction
- Top
- (1) Power/Touch Button: Long press to turn on/off power; short press to turn on/off the screen touch function.
- (2) 1/4" Screw Thread: For mounting on a bracket, etc.
- (3) Micro SD Card Slot: For upgrading firmware or importing LUT files.
- (4) MENU Wheel Button: Used for menu navigation and selection.
- Bottom
| Label | Interface | Description |
|---|---|---|
| (1) | Audio Output Interface | 3.5 mm Analog Audio |
| (2) | Power Input Interface | DC 12V/1.5A |
| (3) | Power Output Interface | DC 8.4V/2A |
| (4) | 1/4" Screw Thread | For mounting on a bracket, etc. |
| (5) | SDI Signal Input Interface | Optional |
| (6) | SDI Signal Output Interface | Optional |
- Left
| Label | Interface | Description |
|---|---|---|
| (1) | HDMI Signal Output Interface | HDMI 1.4 |
| (2) | HDMI Signal Input Interface | HDMI 2.0 |
- Right
| Label | Interface | Description |
|---|---|---|
| (1) | USB2.0 Interface | Recording |
| (2) | 1/4" Screw Thread | For mounting on a bracket, etc. |
1.3 Power Supply Way
- F970 Battery Plate: Located on the rear cover, compatible with F970 series batteries (e.g., Sony F970, F960, F950, F930, F770, F750, F730, F570, F550, F530 series). It is recommended to use original F970 batteries for optimal performance. Remove the battery if the monitor will not be used for an extended period.
- DC IN 12V: DC power input with polarity (+/-). Barrel connector (5.5mm outer, 2.1mm inner) located at the bottom of the monitor. Supports DC 7-14V input.
- DC OUT 8.4V: DC power output interface with polarity. Barrel output for powering cameras via compatible DC couplers (e.g., NP-FW50 Sony, LP-E6 Canon, DMW-BLF19 Panasonic).
1.4 Mount Points
The monitor features three 1/4"-20 thread points (top, bottom, right) for easy connection to hot shoe mounts or tripod installations.
2. Menu Operation Instruction
After connecting the power supply, the power button indicator is red. Long press the power button to turn on the monitor; the indicator turns green. Short press the power button to toggle the screen touch function on or off.
2.1 Touch Screen Menu Operation (Touch function enabled)
- Double-click anywhere on the screen to open the main menu (displayed on the left). Tap a menu item to display its sub-menu. Select or set options by tapping. Tap the screen again to exit the menu.
- When no menu is displayed, swipe up from the bottom of the screen to open the shortcut menu. Tap a menu box to open or set the corresponding function.
- When no menu is displayed, on the left half of the screen (1/2 split screen), you can adjust screen backlight brightness. On the right half, you can adjust volume.
2.2 MENU Wheel Menu Operation
- When no menu is displayed, rotate the wheel to adjust backlight or volume. The wheel's function can be set in the System menu.
- Short press the MENU wheel to open the main menu (on the left). Rotate the wheel to select a sub-menu, then press the wheel to confirm. Rotate again to select or set an option.
- Long press the MENU wheel to open the shortcut menu (below the screen). Rotate to select a shortcut option, then press to toggle the function on/off. If selecting a parameter, repeat the process. Long press the wheel to exit.
3. Function Instruction
3.1 Menu Function
The main menu consists of five sections: Assist, Marker, Image, User, and System.
Assist
| Analysis | Options |
|---|---|
| Waveform | Off, On. Type: RGB, YUV. Assists with camera calibration by showing image brightness for exposure correction and lighting evenness. |
| Vectorscope | Off, On. Shows image saturation and color spectrum positioning. |
| Histogram | Off, On. Type: Y, RGB, Y+RGB. Displays the tonal distribution of the image. |
| Focus Assist | Off, On. Focus Color: Red, Green, Blue, White. Focus Level: 1-100. Highlights in-focus areas. |
| False Color | Off, On. Type: Red, Green, Blue, White. Level: 1-100. Assigns colors to represent luminance levels for exposure. |
| Monochrome | Off, On. Type: Spectrum, ARRI. Displays the image in monochrome for detailed analysis. |
Marker
| Marker Type | Options |
|---|---|
| Nine Grid | Off, On. Divides the screen into nine equal sections for composition. |
| Safe Areas | Off, On. Type: 70%, 80%, 90%, 16:9, 16:10, 4:3, 5:4, 1:1, 1.91:1, 4:5, 9:16, 1.85:1, 2.35:1. Line Color: Red, Green, Blue, White, Black, Yellow. Marks areas considered safe for broadcast. |
| Crosshair | Off, On. Displays a crosshair for precise focusing. |
| Cinema Guides | Type: 16:9, 16:10, 4:3, 1.85:1, 2.35:1, 2.41:1, 1.91:1, 5:4, 1:1.91. Line Color: Red, Green, Blue, White, Black, Yellow. Marker Mat Alpha: 0%-75%. Displays common cinematic aspect ratios. |
Image
| Setting | Options |
|---|---|
| Scan Mode | Mode: Under Scan, Over Scan. Adjusts how the image fits the screen. |
| Aspect Ratio | Type: 16:9, 16:10, 4:3, 5:4, 1.85:1, 2.35:1, User. User allows custom Video Width (100%-200%) and Video Height (100%-200%). Sets the display aspect ratio. |
| Anamorphic | Type: 1.25x, 1.33x, 1.5x, 1.8x, 2.0x, 2.0x mag. Adjusts for anamorphic lens footage. |
| Mirror | Auto, 180 Degrees, Flip H, Flip V. Flips or rotates the image. |
| Zoom | Zoom Times: 1.0x - 5.0x. Magnifies the image. |
| Freeze | Off, On. Freezes the current image frame. |
| HDR | Off, On. HLG2020, HLG709, HLG P3. Enables High Dynamic Range display modes. |
| LUT | Import 3D LUT files from a Micro SD card (up to 50 files). LUT List displays built-in and custom LUTs (SLOG2, SLOG3, LOGC, VLOG). Ensure the SD card is inserted correctly. Applies color grading presets. |
| Display | Reset: Off, On. Color Temp.: 5600K, 6500K, 9300K, User. Backlight: 0-100. Brightness: 0-100. Contrast: 0-100. Saturation: 0-100. User settings allow adjustment of Red, Green, and Blue values (0-255). Controls display parameters. |
System
| Setting | Options |
|---|---|
| Wheel Option | Backlight, Volume. Assigns backlight or volume control to the MENU wheel when the menu is not displayed. |
| Input Signal | HDMI, SDI (SDI version only). Selects the input signal type. HDMI supports 1080P and Follow In. |
| Cooler | Low, Medium, High. Adjusts the fan speed for cooling. |
| Language | English, 中文, Español, Français, Deutsch, 日本語, 한국어, Русский. Selects the OSD language. |
| OSD Time | Always, 15s, 30s, 45s, 60s. Sets how long the On-Screen Display remains visible. OSD Alpha: 0%-75%. Adjusts OSD transparency. |
| Volume | Mute: Off, On. Volume: 0-100. Controls audio volume. |
| Restore Factory | Off, On. Resets all parameters to factory defaults. |
| Upgrade | Current Version: Displays the current device firmware version. Update: Copy the update file to the SD card and insert it. Click Update or use the wheel to initiate the update. Ensure the SD card is inserted correctly. Updates the device firmware. |
3.2 Shortcut Menu
Swipe up from the bottom of the screen to access the shortcut menu. Tap menu boxes to open or set functions. Hide detailed parameters using the hide icon [hide-icon] and display them using the display icon [display-icon].
3.3 Status column
The status column at the top of the interface displays input/output resolution, battery level, and other information.
- INPUT: Displays the resolution of the input signal (e.g., INPUT HDMI 1920x1080x60).
- OUTPUT: Displays the resolution of the output signal (e.g., OUTPUT HDMI 1920x1080x60).
- LUT: Shows LUT status. Displays the LUT name (e.g., SLOG2) when a LUT is active, or 'LUT Monitor' otherwise.
- Recording: When a USB flash drive is plugged into the USB2.0 port (FAT32 format supported), a red recording icon [record-icon] appears at the top. Click to start recording. The recording time is displayed. After approximately 1 minute, the information hides automatically. Click anywhere on the screen to view the recording time, or click the recording icon again to end the recording.
- Volume: Displays the current volume level (0-100).
- Lock: Indicates the touch function status. 'Lock' means touch is disabled; 'Unlock' means touch is enabled.
- Battery Level: Displays the battery status using four bars. Full bars: 80%-100%. Three bars: 50%-80%. Two bars: 30%-50%. One bar: 10%-30%. Empty: less than 10%. The battery icon turns red when the level is low.
Note: The status bar is hidden by default and appears only when the main menu or shortcut menu is active.
4. Support Formats
| Signal Type | Supported Formats |
|---|---|
| SDI Support Format (SDI version) | 480i | 576i | 1080i@59.94/60 720p@23.98/24/25/29.97/30/50/59.94/60 1080p@23.98/24/25/29.97/30/50/59.94/60 1080psf@23.8/24/25/29.7/30 |
| HDMI 2.0 Support Format | SMPTE: 720p@50/60 | 1080i@50/60 | 1080p@24/30/50/60 720p (60/59.94/50/30/29.97/25/24/23.98) VESA: 1024x768@60 | 1280x720@60 | 1280x768@60 | 1280x800@60 | 1280x1024@60 | 1360x768@60 | 1366x768@60 | 1440x900@60 | 1600x1200@60 | 1680x1050@60 | 1920x1080@60 | 1920x1200@60 | 3840x2160@60 | 4096x2160@60 |
| HDMI 1.4 Support Format | SMPTE: 720p@50/60 | 1080p@24/25/30/50/60 VESA: 1024x768@60 | 1280x720@50/60 | 1280x768@60 | 1280x1024@60 | 1360x768@60 | 1920x1080@24/25/30/50/60 |
5. Technical Parameters
| Parameter | Specification |
|---|---|
| Panel Size | 6" touch screen |
| Resolution | 1920 x 1080 pixels |
| Dot Pitch | 0.069(H) x 0.069(V) mm |
| Aspect Ratio | 16:9 |
| Brightness | 450 cd/m² |
| Contrast | 1000:1 |
| Viewing Angle | 80°/80°(L/R) 80°/80°(U/D) |
| Backlight | LED |
| Input | SDI (optional), HDMI 2.0 |
| Output | SDI (optional), HDMI 1.4, DC OUT 8.4V |
| Other Interface | USB2.0 (recording), Micro SD Card Slot |
| Record Format | MP4 (1920x1080 resolution) |
| Audio | 3.5mm Stereo Headphone |
| Power Input Voltage | 7-14 V |
| Power Consumption | ≤ 11 W |
| Unit Size | 152L x 86H x 23D (mm) |
| Unit Weight | 230g |
| Mount Points | (3) 1/4"-20 thread points (top, bottom, right) |
| Working Temperature | -20°C to 50°C |
| Storage Temperature | -30°C to 60°C |
6. Trouble Shooting
6.1 Only black and white or monochrome picture:
- Please check saturation, brightness, and contrast adjustments.
- Please check if 'Monochrome' is set to black, white, or monochrome image, or other conditions.
6.2 NO Image after power on:
- Check if the signal cable connection is in good condition.
- Check the signal cable connection and ensure a standard adapter is used. If powered by battery, check if the battery is fully charged.
6.3 Earphone No sound:
- Check if the Volume control is muted. Press the volume button and try to increase the volume.
If you encounter other problems, please contact FEELWORLD technical support. As product features and performance are continuously improved, specifications may change without prior notice.
