Instructions for NEOVICTORY models including: EROICA, X5H-EROICA, X5HEROICA, EROICA BoneSound Wearable Series TWS Glasses, BoneSound Wearable Series TWS Glasses

說明書-FCC01

User Manual

NeoVictory Technology Co., Ltd EROICA BoneSound Wearable series X5H-EROICA X5HEROICA eroica

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized
• Document:
  • Text

File Info : application/pdf, 3 Pages, 513.66KB

TWS Glasses
Illustration
MFB

LED Indicator Microphone

Adjustable parts (Optional)

USB charger (TYPE C)

Bone conduction SPK

Communication Paring to Your device
1. Turn on the Bluetooth on your device.
2. Push the MFB button to power on the TWS Glasses devices respectively. The LED Indicators become breathing mode, gradually lighter and darker.
3. Search the TWS Glasses device, which named BONE , on your device.
4. While connection built up between your device and TWS Glasses, the LED of master TWS device will become flash mode.
Note. The master TWS device built the connection to your device with Bluetooth firstly.

Power - ON/OFF
Hold on any side of the MFB button for 3 secs. Both side should controlled respectively.
Music - Play/Pause
One-short push any side of the MFB, this operation will be accept in each TWS device.
Volume - Up+/Down-
Hold on the MFB button on right-hand side device, a notice sound will played. This operation will increase the 5-level volume sequentially.
EQ mode - Mode switch
Hold on the MFB button on left-hand side device, a notice sound will played. This operation will switch the 3 EQ modes sequentially.
Coming Call Answer call / Hang up call
One-short push any side of the MFB on each TWS device.
TWS reset Forget all connect information.
After power on the TWS devices, hold on the MFB button over 10 secs. While the LED indicator become dark, release the MFB button.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the device and receiver. --Connect the device into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment