UNICO® TOWER INVERTER 12 HP
The air conditioning without outdoor unit in only 470 mm of width and 185 mm deep.
Key Features
LARGE FLAP
Motorized superior flap for even distribution of air.
DESIGN MADE IN ITALY
Italian design, with unconventional shapes. Vertically developed, it brings comfort where any other installation would be impossible.
OLIMPIA SPLENDID INVERTER SYSTEM
Olimpia Splendid's variable speed compressor and inverter control ensure a constant adaptation of the cooling capacity to the ambient thermal load.
SILENT MODE
All the silence you want using the "silent mode" function.
Technical Specifications
| Feature | Specification |
|---|---|
| Cooling power (min/max) | 1,45/2,95 kW |
| Heating power (min/max) | 1,45/3,10 kW |
| Nominal cooling capacity (1) | 2,45 kW |
| Nominal heating capacity (1) | 2,55 kW |
| Nominal power consumption for cooling (1) | 0,9 kW |
| Nominal absorption for cooling (1) | 4,9 A |
| Nominal power consumption for heating (1) | 0,8 kW |
| Nominal absorption for heating (1) | 3,7 A |
| Energy efficiency class in cooling (1) | A |
| Energy efficiency class in heating (1) | A |
| Energy consumption in "thermostat off" mode | 29 W |
| Energy consumption in "standby" mode (EN 62301) | 0,5 W |
| Silent mode cooling capacity | 1,45 kW |
| Silent mode heating capacity | 1,45 kW |
| Supply voltage | 230-1-50 V-F-Hz |
| Maximum power consumption in cooling mode (1) | 1700 W |
| Maximum absorption in cooling mode (1) | 8,54 A |
| Maximum power consumption in heating mode (1) | 1400 W |
| Maximum absorption in heating mode (1) | 6,20 A |
| Dehumidification capacity | 1,0 l/h |
| Air flow rate in cooling environment (max) | 260 m³/h |
| Air flow rate in heating environment (max) | 260 m³/h |
| External air flow rate in cooling (max) | 486 m³/h |
| External air flow rate in heating (max) | 486 m³/h |
| Diameter wall holes | 162 mm |
| Maximum range remote control (distance / angle) | 8 m / ±80° |
| Dimensions (W x H x D) (without packaging) | 470 x 1390 x 185 mm |
| Weight (without packaging) | 54 Kg |
| Internal sound pressure (Min Max) (2) | 27-40 dB(A) |
| Internal sound power level (EN 12102) | 57 dB(A) |
| Silent Mode sound pressure level | 31 dB(A) |
| Silent Mode sound power level | 44 dB(A) |
| Degree of protection provided by covers | IP20 |
| Refrigerant gas type | R410A |
| Global warming potential | 2088 kgCO2 eq. |
| Refrigerant gas charge | 0,50 kg |
| Maximum operating pressure | 4,20 MPa |
| Power cable (N° pole x section mm2) | 3 x 1,5 |
Dimensions Diagram: The unit has a width (A) of 470 mm, a depth (B) of 185 mm, and a height (C) of 1390 mm.
Operating Conditions
Indoor Ambient Temperature
- Maximum temperature in cooling: DB 35°C-WB 24°C
- Minimum temperature in cooling: DB 18°C
- Maximum temperature in heating: DB 27°C
- Minimum temperature in heating: DB 18°C
Outdoor Ambient Temperature
- Maximum temperature in cooling: DB 43°C-WB 32°C
- Minimum temperature in cooling: DB 18°C
- Maximum temperature in heating: DB 24°C - WB 18°C
- Minimum temperature in heating: DB -15°C
Notes
(1) Test condition: data refers to regulation EN14511 - HEATING MODE: outdoor ambient temperature DB 7°C / WB 6°C; indoor ambient DB 20°C / WB 15°C - COOLING MODE: outdoor ambient temperature DB 35°C / WB 24°C; indoor ambient DB 27°C / WB 19°C.
(2) Data test declaration in semianechoic room at a distance of 2m, minimum sound pressure with ventilation only.
By maintaining the same center to center distance of inlet and outlet holes and the possibility of installation with 162 mm diameter holes, models in the Unico Smart, Unico Inverter and Unico Act range may easily substitute previously installed Unico Star and Unico Sky models.
*Hermetically sealed equipment containing fluorinated gas with GWP equivalent 2088.
