Mark 4-7 V2 Installation Manual
Packing List
The packing list includes the following components:
- Four arms
- Base plate
- Center plate
- Aluminum posts (eight total)
- Lens clamp
- Upper plate
- Screws (12 for base, 8 for upper plate)
Installation Steps
- Place the four arms onto the base plate.
- Position the center plate on top of the arms, ensuring the holes are aligned.
- Secure the base plate and arms by driving 12 screws.
- Screw the eight aluminum posts into their designated positions as shown in the diagram.
- Attach the lens clamp.
- Align the battery sticker with the holes on the upper plate. Ensure the countersunk holes face upwards.
- Mount the upper plate onto the aluminum posts.
- Fasten the upper plate by screwing in the eight screws.
