User Manual for EMEET models including: B087FRNS6P Wireless Speakerphone, B087FRNS6P, Wireless Speakerphone, Speakerphone

RayBit POD 3 Manual

• Google Docs
• Google Drive
• Download [pdf]



File Info : application/pdf, 6 Pages, 3.26MB

Document Document

Wireless Speakerphone
User Manual

What's in the box

Wireless Speakerphone X 1

Wireless Receiver X 1 Optional
Wireless Speakerphone

USB Cable X 1

User Manual X 1

Overview

Indicator

Bluetooth

Answer / end call

Volume 

Mute/unmute

Power On/Off

Volume +

Type C

Silicone Pad

Easy Set-Up

1. On/off
Long press ON/OFF with beep notice.

for 2s, device will be turn on/off,

2. Connect to speak 100 USB & BT
2.1 Connect by Bluetooth Long press Bluetooth button for 2 seconds to start pairing modethen turn on Bluetooth of mobile phone or computer and select device Speak 100 USB & BT to connect. When connection is completed, the lamp ring will be fully on in blue, with voice notice.

2.2 Connect by USB Connect Speak 100 USB & BT with computer by USB cable. After connection, the green circle light will increase clockwise one by one showing charging status. Green circle light will be on in full when charging completed.
USB Cable

2.3 Connect by Wireless Receiver Connect the USB wireless receiver to your computer, and start Bluetooth pairing mode on speakerphone. Wait for about 10 seconds until the pairing is completed, then the speakerphone is connected and ready to go.
Wireless Receiver

3. Audio source switching function

When device is connected by Bluetooth and USB simultaneously,

short press / tap the Bluetooth button

to switch between

Bluetooth and USB transmission.

4. Answer /end calls
Press button to answer callspress

button to end calls.

5. Volume increase/decrease
When volume increase /decrease the green lights will on/off one by one.When adjustment completedlights will off after 4s.

6. Mute
6.1 Press Mute , microphone audio input will stop.
6.2 Long press the mute key for about 2s to switch VoiceCap mode. The Voicecap function is for eliminating surrounding noise automatically and only voice within radius range of 1.5 meters will be picked up and transmited. Also speaker volumn will be adjusted automatically according to surrounding noise. VoiceCap model is only suggested in open space. Please disable this function when in conference rooms.

7. Auto Power Of
When device is not connected by Bluetooth or USB in 15mins, it will shut down automatically.

8. Power indicator
When device is not connected by USB, short press / tap power button , the green circle light will indicate power condition.