SmallRig L-Bracket Operating Instruction
For Sony Alpha 7R V / Alpha 7 IV / Alpha 7S III / Alpha 1 / Alpha 7R IV / Alpha 9 II
Product Description
The SmallRig L-Bracket (Model 3660) is designed to facilitate switching between horizontal and vertical modes and to improve grip experience for Sony Alpha 7R V, 7 IV, 7S III, 1, 7R IV, and 9 II cameras. It locks the camera via a 1/4"-20 screw at the bottom and a locating pin, with rub pads to prevent scratches. A hinge arm at the battery door fits the camera curve for enhanced grip. Embedded genuine leather in the baseplate integrates with the camera body.
The baseplate features a built-in Arca-Swiss quick-release plate at the bottom, compatible with Arca-type tripods or DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro gimbals. Multiple 1/4"-20 threaded holes at the bottom support quick release plates and tripods. It includes a built-in wrist strap hole for use with Hand Strap 3848 and a QD mount for attaching a QD strap buckle. A built-in flat-head screwdriver and hex spanner are included for easy installation and removal.
The Arca-Swiss quick-release side plate allows for quick switching between horizontal and vertical modes on a tripod. A 25mm stretchable side plate allows cables to pass through during vertical shooting. The side plate is extendable to attach HDMI cables and can be adjusted back and forth to facilitate 180-degree opening and 120-degree rotation of the LCD screen of the Alpha 7 IV / Alpha 7S III.
Safety Guidelines
- Environment: Do not use the product underwater, in extreme temperatures (e.g., freezing or direct heat), corrosive environments, or excessive dust. Dry metal parts immediately after liquid contact to prevent corrosion.
- Load Capacity: Do not exceed the maximum weight capacity indicated on the product. Overloading risks structural failure, deformation, or accidental drops.
- Cleaning & Maintenance: Clean surfaces with a dry, soft cloth. Avoid chemicals like alcohol or solvents. Ensure dry and ventilated conditions for long-term storage.
- Structural Integrity: Do not modify the product (e.g., drilling, cutting) as this compromises structural integrity and increases drop risks.
- Malfunctions: Stop use immediately if you notice deformation, unusual noises, or loose components, and contact support.
In the Box
- Baseplate × 1
- Guarantee Card
Product Details
The product features:
- 1/4"-20 Threaded Hole (top and bottom)
- Strap Slot
- Allen Wrench
- QD Socket
- Flat-Head Screwdriver
- Arca-Swiss Plate
Description of diagrams:
The first diagram shows the L-Bracket from a side perspective, highlighting the 1/4"-20 threaded hole, strap slot, and Allen wrench. The second diagram shows the baseplate from the bottom, indicating the 1/4"-20 threaded hole, QD socket, flat-head screwdriver, and Arca-Swiss plate.
Easy to Use
The L-Bracket allows for easy attachment and detachment to the camera, facilitating quick switches between horizontal and vertical shooting orientations. The extendable side plate allows for cable management and screen adjustments.
Description of diagrams:
The first diagram illustrates the process of attaching the L-Bracket to a Sony Alpha camera, showing the bracket sliding into place from the side. The second diagram shows the L-Bracket attached to the camera from the bottom, with arrows indicating the movement of the side plate.
Specifications
Compatibility: Sony Alpha 7R V / Sony Alpha 7 IV / Sony Alpha 7S III / Sony Alpha 7R IV / Sony Alpha 1 / Sony Alpha 9 II
Product Dimensions: 142.2 x 65.1 x 88.8mm
Package Dimensions: 161.0 x 123.0 x 71.5 mm
Product Weight: 135g±5g
Package Weight: 255g±5.0g
Material(s): Aluminum Alloy, Stainless Steel, Silicone, Genuine Leather
Description of diagram: The diagram shows the L-Bracket with its dimensions labeled: 142.2mm length, 65.1mm width, and 88.8mm height.
Manufacturer Information
Manufacturer Email: support@smallrig.com
Manufacturer: Shenzhen Leqi Innovation Co., Ltd.
Address: Rooms 101, 701, 901, Building 4, Gonglianfuji Innovation Park, No. 58, Ping'an Road, Dafu Community, Guanlan Street, Longhua District, Shenzhen, Guangdong, China.
Consignor: Shenzhen LC Co., Ltd.
Address: Room 201, Building 4, Gonglianfuji Innovation Park, No. 58, Ping'an Road, Dafu Community, Guanlan Street, Longhua District, Shenzhen, Guangdong, China.
The product complies with RoHS and CE standards. It is made in China. Recycling instructions are provided in French (Le Tri Facile), Spanish (Recicla Al Azul), and Chinese (合格证 已检验).
