Kitchen Scale Operating Instructions
For the purpose of proper using & maintaining the kitchen scale, please read this instruction completely before operating.
SPECIFICATIONS
- Equipped with a high precision “strain-gauge” sensor.
- Capacity: 1000g, 3000g, 5000g, 7000g, 10000g.
- Division: 0.1/1g
- LCD display
- Automatic zero resetting.
- Automatic switch off.
- Low power indicator.
- Over load indicator "O-LD"
- Tare function
- Two model units (g/oz)
POWER SUPPLY
- Please rapidly install the battery into the battery holder after opening the cover of the battery holder.
- Battery: AA1.5V (requires 3V total, likely two batteries)
- Work voltage: 2x1.5V=3V
- Low battery indication: “LO”
OPERATION
- STEP1: Place the kitchen scale on a hard & flat surface.
- STEP2: Press the “ON/OFF” key; the scale will show zero in 3 seconds.
- STEP3: Place the object that will be weighed into the container; the weight will appear on the display.
TARE (TO WEIGHT DIFFERENT INGREDIENTS IN THE SAME CONTAINER)
- Leave the first ingredient weighted in the container, press the “TARE” key to reset the display to “0”. Add the next ingredients to the container, and the weight appears on the display, and so on.
SWITCH OFF
- After finishing weighing, press the “ON/OFF” key.
- When you step off the scale, it will automatically switch off if no weighing is carried out while the zero is being displayed. The scale switches itself off automatically after approximately one minute.
UNIT EXCHANGE (g/oz)
- Press the “MODE” key; you can choose the unit of “g” or “oz”.
OVER LOAD INDICATOR
- When the scale is overloaded, the following will appear on the screen: “O-LD”.
Display shows: O-Ld
ADVICE FOR USE AND CARE
- Place your scale on a hard, flat surface, and make sure it is steady before use.
- Place the object to be weighed in the middle of the scale to ensure the greatest accuracy.
- Do not use chemical abrasive cleaners to clean the scale.
- Do not allow your scale to become saturated with water, as this can damage the electronics.
- Do not store the scale in an upright position when not in use, as this will drain the batteries.
- Remove the batteries if the scale is not being used for a long time.
- Treat your scale with care, because it is a precision instrument.
- Do not drop it.