Instruction Manual for WILTRONICS models including: 1 10 Scale, RC Big Wheel Rock Crawler with LEDs, Big Wheel Rock Crawler with LEDs, Rock Crawler with LEDs, Crawler with LEDs, LEDs
1:10 Scale R/C Big Wheel Rock Crawler with LEDs | Wiltronics
2023-02-01 — When not in use, remove the batteries from the remote and the remote controlled car. For transport it is recommended to place the car and remote in the ...
il y a 1 jour — If the car becomes dirty through use please gently wipe it down with a damp cloth. Cause of issue mud or puddles. MANUAL. Distributed by: Electus Distribution ...
File Info : application/pdf, 1 Pages, 1.65MB
DocumentDocumentOPERATED MANUAL compartment B checked to ensure correct polarities for installing; F charger After the batteries are in the controller the LED light will begin flashing, install the battery into the car and turn it on. It will then connect. If it does not connect turn both remote and car off before trying again. Cause of issue Remote control or remote control car not powering on. Make sure both the remote and the car are switched to "ON". non-responsive Do not use potential damage. 2. When not in use, remove the batteries from the remote and the remote controlled car. For transport it is recommended to place the car and remote in the existing packaging. 3. To clean the remote controlled car use a damp cloth to gently wipe the car down. area for driving use the on or in a storing car towards If the car becomes dirty through use please gently wipe it down with a damp cloth. car or remote store brightest Distributed by: Electus Distribution Pty Ltd 46 Eastern Creek Dr, Eastern Creek NSW 2766 Australia Ph 1300 738 555 Int'l +61 2 8832 3200 Fax 1300 738 500 www.electusdistribution.com.au mud or puddles.