CR-Scan Ferret Pro 3D Scanner

1. Specification

Wireless bridge Specification

2. Packing List

An illustration displays all 12 items included in the CR-Scan Ferret Pro package:

1. Rechargeable Handle
2. CR-Scan Ferret Pro Scanner
3. Wireless Bridge
4. Tripod
5. Phone Holder
6. Power Cable for Wireless Bridge
7. Data Cable for Wireless Bridge
8. Quick Mount Kit
9. USB Cable for Smartphone & Handle
10. USB Cable for Computer
11. Type-C Adapter
12. Carrying Case

* [Power Button] One click: ON, Double click: OFF

3. System Requirements

System Requirements

• PC: i5-Gen8 CPU and above, Windows: Windows10/11 (64-bit), RAM: 8G and above
• Mac: M1/M2 series processor, macOS Big Sur 11.7.7 and above, RAM: 8G and above
• Mac (Intel): Intel processor (i5-Gen8 CPU and above), macOS Catalina 10.15.7 and above, RAM: 8G and above
• Android: Android 10.0 and above, RAM: 8G and above
• iPhone: iPhone11 and above, iOS: iOS13 and above

* For better scanning performance, PC is recommended.

Software & Firmware Link

Creality: https://www.creality.com/pages/download-cr-scan-ferret

Google play: https://play.google.com/store/apps/details?id=com.creality.crealityscan

4. Device Attachment

Connecting Ferret Pro to PC via USB cable

Turntable mode installation: A diagram shows the scanner mounted on a tripod for turntable mode setup.

PC Connection: A diagram illustrates the scanner and handle connected via USB cable to a laptop.

Connecting Ferret Pro to Phones via Wi-Fi

Handheld mode installation with wireless bridge: A diagram shows the scanner, handle, and wireless bridge assembled for handheld use.

Wireless bridge connection: A diagram details the connection of the wireless bridge, data cable, and power cable to the scanner and handle.

To connect the Smartphone to the wireless bridge:

1. Connect the wireless bridge to the scanner and rechargeable handle. Wait a few seconds until the LED turns blue.
2. Go to your smartphone's Wi-Fi setting, search for the network called 'Ferret-XXXXXX' and connect. (No password is required).
3. Wait a few seconds for the scanner to be connected.

Facebook Group

A place to discuss, share, trouble shoot: [Link to Facebook Group]

Tutorials

Master the art of scanning!: [Link to Tutorials]

Wireless Bridge LED Indicators

LED Indicator:

• No light: Power off
• Green light: Power on
• Yellow light: Firmware update
• Red light: Initiation/Error
• Blue light: Wi-Fi ready

Connecting Ferret Pro to Android Phones via USB cable

Handheld mode installation without wireless bridge: A diagram shows the scanner and handle assembled for handheld use without the wireless bridge.

USB cable connection to Android Phones: A diagram depicts the scanner, handle, and USB cable connected to a smartphone.

Warnings

⚠️ Warning: Due to the used enclosure material, the product shall only be connected to a USB Interface of version 2.0 or higher. The connection to so-called power USB is prohibited.

Do not use the product in the environment at too high or too low temperature, never expose the product under strong sunshine or too wet environment. The suitable temperature for the product and accessories is 0°C-40°C.

This device is a low-power radio transmitter and receiver. As recommended by international guidelines, the device meets applicable national SAR limits of 2.0W/kg (10g). 10g SAR: meets low-power exclusion level, SAR test is not required.

RF band/RF power

EU Regulatory Conformance

Orbbec Inc. declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. This product can be used across EU member states.

This device is restricted to indoor use where operated in the European Community using frequency in 5150MHz-5350MHz to reduce the potential for interference.

⚠️ Warning: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. Federal Communication Commission (FCC) Radiation Exposure Statement: Power is so low that no RF exposure calculation is needed.

According to the Radio Law, the 5GHz band is limited to indoor use within Japan.

Orbbec Inc.

Company Address: 12/F, Hi-Tech Zone Union Headquarters Building, No.63 Xuefu Road, Nanshan District, Shenzhen, Guangdong P. R. China