Xavax JEWEL Digital Precision Scales

Introduction

Thank you for choosing a Xavax product. Take your time and read the following instructions and information completely. Keep these operating instructions in a safe place for future reference.

1. Explanation of Warning Symbols and Notes

⚠️ This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.

2. Package Contents

• Digital precision scales
• 2 CR2032 batteries
• These operating instructions

3. Controls and Displays

The device features a weighing surface, a digital display, and several control buttons.

Diagram Description: The scale has a circular stainless steel weighing surface. Below this is a digital display showing "282.2". To the left of the display is a button labeled "UNIT" with a light symbol. To the right of the display are buttons labeled "TARE" and a power symbol.

• 1. Unit button: Selects the units of measurement (g, ct, gn, oz, ozt, dwt).
• 2. Backlight switch: Switches the display backlight on or off.
• 3. Display: Shows the weight measurement and other indicators.
• 4. TARE button: Activates the tare function to zero the scale.
• 5. Power on/off button: Turns the scale on or off.
• 6. Weighing surface: The platform where items are placed for weighing.

4. Safety Notes

This device is intended for private, non-commercial use only.

• Protect the device from dirt, moisture, and overheating; use only in dry locations.
• Do not drop the device or expose it to major shocks.
• Do not operate the device outside its specified operating limits.
• Do not open the device or operate it if damaged.
• Keep packaging material out of reach of children due to suffocation risk.
• Dispose of packaging material according to local regulations.
• Do not modify the device, as this voids the warranty.
• Avoid using the product near heaters, heat sources, or in direct sunlight.
• Do not use the product in areas where electronic devices are prohibited.
• Do not attempt self-service or repair; use qualified experts.
• Keep this product, like all electrical products, out of reach of children.
• Use the item only in moderate climatic conditions.

⚠️ Battery Warnings

• When inserting batteries, ensure correct polarity (+/-). Incorrect polarity may cause leakage or explosion.
• Use only batteries matching the specified type.
• Clean battery contacts and product contacts before inserting batteries.
• Do not allow children to change batteries without supervision.
• Do not mix old and new batteries, or batteries of different types or makes.
• Remove batteries from products not in use for extended periods (unless for emergency).
• Do not short-circuit batteries.
• Do not charge batteries.
• Do not throw batteries into fire.
• Keep batteries out of reach of children.
• Never open, damage, swallow, or dispose of batteries in the environment. They can contain toxic, environmentally harmful heavy metals.
• Immediately remove and dispose of dead batteries.
• Avoid storing, charging, or using the device in extreme temperatures and low atmospheric pressure (e.g., at high altitudes).

⚠️ Button Cell Warnings

• Do not ingest battery; risk of burns from dangerous substances.
• This product contains button cells. If swallowed, severe internal burns can occur within two hours, potentially leading to death.
• Keep new and used batteries out of reach of children.
• If the battery compartment does not close securely, stop using the product and keep it out of reach of children.
• Seek immediate medical assistance if batteries are suspected to have been swallowed or inserted into the body.

5. Getting Started

5.1 Insert the batteries

Open the battery compartment on the back and insert two CR2032 button cell batteries. Ensure correct polarity (+/-); the positive pole (+) must point upwards. Close the battery compartment securely.

5.2 Units of Measurement

Available units are: g (gram), ct (carat), gn (grain), oz (ounce), ozt (troy ounce), and dwt (pennyweight). Press the Unit button to cycle through the units in the order: g-ct-gn-oz-ozt-dwt-g.

5.3 Weighing

• Place the scales on a clean, level, and stable surface.
• Switch on the scales by pressing the Power on/off button. All symbols will appear on the display. Wait until "0.0 g" is shown.
• Place the item to be weighed onto the scales and read the weight value.

5.4 Using the Tare Function (TARE)

Place an empty container on the scales; its weight will be displayed. Press the TARE button to zero the scale. Then, place the item to be weighed into the container. Only the net weight of the item will be shown.

Once the display is stable, the scales will automatically switch off after approximately 60 seconds. You can manually switch off the scales by pressing and holding the Power on/off button.

6. Error Messages

• If the error message "O-Ld" is displayed, the scale is overloaded.
• If the error message "LO" is displayed, the battery is low. Replace the battery as soon as possible.

7. Care and Maintenance

• Clean this product only with a slightly damp, lint-free cloth. Do not use aggressive cleaning agents. Ensure no water enters the scale.
• The weighing surface is made of stainless steel.

8. Warranty Disclaimer

Hama GmbH & Co KG assumes no liability or warranty for damage resulting from improper installation, mounting, misuse of the product, or failure to observe the operating and/or safety instructions.

9. Technical Data

The high-precision strain gauge sensor and powerful processor ensure extremely precise weighing.

10. Recycling Information

Note on environmental protection:

Following the implementation of European Directives 2012/19/EU and 2006/66/EU into national law, the following applies: Electric and electronic devices, as well as batteries, must not be disposed of with household waste. Consumers are legally obliged to return electrical and electronic devices and batteries at the end of their service life to designated public collection points or points of sale. Details are defined by the national law of each country. The symbol on the product, manual, or packaging indicates compliance with these regulations. By recycling, reusing materials, or otherwise utilizing old devices/batteries, you make an important contribution to protecting our environment. ♻️