Manuals+

Instructions for Jabra models including: Engage 75 Mono, Wireless Headphone, Engage 75 Mono Wireless Headphone, Headphone

Jabra Engage 75 Mono

prieš 1 dieną — See the user manual located in the Technical section for more details about setting up the desk phone. Use Jabra Direct, the computer application ...


File Info : application/pdf, 2 Pages, 56.51KB

PDF preview unavailable. Download the PDF instead.

How do I connect my Jabra Engage with my Nortel IP desk phone 
30/08/2022 12:05

Jabra Engage 75 Mono
How do I connect my Jabra Engage with my Nortel IP 1120E, 1140E, 1150E, 1165E desk phone so I have remote call control using my headset?
Prerequisites Jabra Link 14201-32 electronic hook switch (EHS) cable One of the following Nortel IP phones: 1120E, 1140E, 1150E, 1165E

To connect your headset: 1. Connect the USB plug of the Jabra EHS adapter into the USB port of
your desk phone. 2. Connect the 2-sided end of the Jabra EHS adapter into the Jabra base
by plugging the RJ10 (small) plug into the port marked with a blue phone icon, and the RJ45 (wide) plug into the base port marked AUX.

To configure your headset when connecting to a desk phone for the first time:
For the Jabra Engage 75, follow the onscreen setup wizard on the base. For the Jabra Engage 65, the initial setup is complete after connecting the cables.
See the user manual located in the Technical Documents section for more details about setting up the desk phone.
Use Jabra Direct, the computer application that is available free of charge, to learn more about your Jabra product. Use Jabra Direct to adjust features and functions according to personal preference or company requirements. Also ensure your Jabra product is updated to get the latest performance. Visit jabra.com/direct for more information.

https://www.jabra.com.au/supportpages/jabra-engage-75/9556-583-117/faq/1fbb9a2773f3-49c0-8496-ef9e57110e1b

Page 1 of 2

30/08/2022 12:05
Note: Additional setup information for your Jabra products:
EHS cable/adapter type: DHSG. Clear dial tone switch: set to position "A". We recommend setting the microphone volume to "7" out of 13.
Phone settings: Press the Service button twice and then navigate to Preset >Headsets>USB. In addition, you must activate the menu option Enable HID Commands as illustrated.

https://www.jabra.com.au/supportpages/jabra-engage-75/9556-583-117/faq/1fbb9a2773f3-49c0-8496-ef9e57110e1b

Page 2 of 2

References

wkhtmltopdf 0.12.6 Qt 4.8.7