FortiAP 231G & 233G Series QuickStart Guide

Before you begin

Register your device to access FortiGuard updates, cloud management, firmware upgrades, technical support and warranty coverage.

https://support.fortinet.com

This guide covers: FAP-231G, FAP-233G

Document Date: May 17, 2023

Copyright © 2022 Fortinet, Inc. All rights reserved. Fortinet, FortiGate, FortiCare, FortiGuard, and certain other marks are registered trademarks of Fortinet, Inc., in the U.S. and other jurisdictions. All other product or company names may be trademarks of their respective owners. Performance and other metrics contained herein were attained in internal lab tests under ideal conditions, and actual performance and other results may vary. Fortinet reserves the right to change, modify, transfer, or otherwise revise this publication without notice. For the latest version, visit docs.fortinet.com.

For Product License Agreement / EULA and Warranty Terms, visit https://www.fortinet.com/content/dam/fortinet/assets/legal/EULA.pdf

The Essentials

Default Logins

• FortiAP (Direct Connection):
  IP Address: https://192.168.1.2
  Username: admin
  Password: (leave blank)
• FortiLAN Cloud:
  URL: http://fortilancloud.com
  Username: user-defined
  Password: user-defined

Fortinet Documents Library

For a detailed Administration Guide, up-to-date Hardware documentation, and Reference Manuals, visit https://docs.fortinet.com/

Customer Service

For contracts, licensing, product registration, and account management, contact FortiCare Support at https://www.fortinet.com/support/contact

Technical Support

To access the Resource Center, Professional Services, and Technical Support Services, visit https://www.fortinet.com/support

Thank you for choosing Fortinet.

Package Contents

The package for FortiAP 231G & 233G (FAP-231G*, FAP-233G**) typically includes:

• QuickStart Guide
• FortiAP Device*
• FortiAP Antenna Device**
• 9/16" Ceiling Mounting Bracket
• 15/16" Ceiling Mounting Bracket
• 8x Mounting Screws with 8x Anchors
• 4x Antennas** (2x detachable, 2x non-detachable)

Setup Options

Power the FortiAP device with a 802.3af/at PoE injector, FortiGate PoE port, or the optional (not included) 12V 2.5A power adapter.

FortiLAN Cloud Setup

Step 1: Connect the FortiAP LAN Port to your network.

Step 2: Use an Ethernet Cable (not included).

Step 3: Access FortiLAN Cloud via http://fortilancloud.com.

Note: Use your FortiCloud credentials to log in, then click Inventory, Import AP Key, and enter the Cloud Key found on the device sticker.

Direct Connection Setup

Step 1: Connect the FortiAP LAN Port to your network.

Step 2: Use an Ethernet Cable (not included).

Step 3: Connect to the FortiGate Ethernet Port.

Note: To self-configure, preauthorize the FortiAP on your FortiGate. Otherwise, once connected, wait for the FortiAP to appear on the Managed FortiAP page in FortiOS.

Network Connection (General)

Step 1: Connect the FortiAP LAN Port.

Step 2: Use an Ethernet Cable (not included).

Step 3: Connect to the same network as your FortiGate.

Step 4: Connect to the FortiGate Ethernet Port.

Note: Connect to the FortiAP using 192.168.1.2 with username admin and set a password. Specify the FortiGate IP using the commands:

Where 0.0.0.0 is the FortiGate IP.

Installation

Bracket Installation

The FortiAP mounts on a ceiling using the provided T-rail mounting brackets, available in two standard sizes: 1.43cm (9/16in) and 2.38cm (15/16in).

1. Select the bracket for the T-rail size: 1.43cm (9/16in) or 2.38cm (15/16in).
2. With the ports facing you, slide the bracket left to right.
3. Hold the device against the ceiling T-rail and push until it snaps into place.

Diagram Description: Visuals show selecting the correct bracket size and sliding it onto the T-rail, followed by attaching the device to the T-rail.

Antenna Installation (FAP-233G only)

1. Insert the antenna base firmly into the appropriate antenna mount.
2. Securely hand tighten the antenna fastening collar.
3. Repeat for the remaining antennas.

Diagram Description: The diagram shows the underside of the FortiAP 233G with four antenna ports labeled A1 through A4. Antennas A1 and A4 are shown as detachable with connectors, while A2 and A3 are shown as integral. Labels indicate frequency bands and function (Service, Scanning).

Note: Antennas A1/A4 radiate Radio1/Radio2 at 2.4/5.0GHz. Antennas A2/A3 provide 6.0GHz service and scanning at 2.4/5.0/6.0GHz.

Note: Antennas A2 and A3 are non-detachable (integral). Antennas A1 and A4 are detachable (connectorized).

Interfaces - FAP 231G / 233G

The FortiAP 231G/233G features several interfaces and indicators:

1. LED Status:
   • Power: Off (Device is off), Green (Device is on and connected to a controller), Amber (Device is on and not connected to a controller).
   • LAN: Off (LAN is not connected), Green (LAN is connected), Blinking Green (LAN data activity).
   • WiFi: Off (WiFi not broadcasting), Green (SSID broadcasting), Blinking Green (Wireless data activity).
2. OPTIONAL POWER (12V DC): Optional 12V DC 2.5A adapter port.
3. RESET: System reset button.
4. CONSOLE (RJ-45): For CLI management.
5. LAN2 (RJ-45): 1 Gbps Ethernet interface.
6. LAN1 / POE (RJ-45): 2.5 Gbps 802.3at PoE Ethernet interface.

Diagram Description: Images show the top and bottom views of the FortiAP 233G, with numbered callouts pointing to the LED status indicator, optional power port, reset button, console port, LAN2 port, and LAN1/PoE port.

Cautions and Warnings

Environmental Specifications

Ambient operating temperature: 0°C to 50°C. Refer to the specific Product Model Data Sheet for detailed Environmental Specifications.

Safety

Caution: This equipment is to be used in a Network Environment 0 per IECTR 62101. This product is connected only to PoE networks without routing to the outside plant.

This product is intended to be supplied by a Listed Direct Plug-In Power Unit marked LPS or Class 2 and rated 12Vdc, 2.5A or by 54Vdc from a PoE source.

Suitable for use in environmental air space in accordance with Section 300-22(C) of the National Electrical Code, and Sections 2-128, 12-010(3) and 12-100 of the Canadian Electrical Code, Part 1, CSA C22.1.

Regulatory Notices

Federal Communication Commission (FCC) – USA

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in residential installations. If interference occurs, users are encouraged to try to correct it by reorienting the antenna, increasing separation, connecting to a different outlet, or consulting a technician.

WARNING: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment complies with FCC radiation exposure limits for an uncontrolled environment. Installation should maintain a minimum distance of 49cm between the radiator and your body. This transmitter must not be co-located or operating with any other antenna or transmitter.

For operation within the 5.925-7.125GHz frequency range, FCC regulations restrict operation to indoor use only. Operation is prohibited on oil platforms, cars, trains, boats, and aircraft (except for large aircraft flying above 10,000 feet). Operation in this band is prohibited for control of unmanned aircraft systems.

Innovation, Science and Economic Development (ISED) – Canada

This Class B digital apparatus complies with Canadian ICES-003.

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to two conditions: 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation.

For products available in the USA/Canada market, only channels 1-11 can be operated.

This equipment complies with ISED radiation exposure limits for an uncontrolled environment. Installation should maintain a minimum distance of 28cm between the radiator and your body.

This radio transmitter (IC: 7280B-3518T01236) has been approved by ISED to operate with specific antenna types. Antenna types not listed, or with higher gain, are strictly prohibited.

This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with IC multi-transmitter product procedures.

Operation shall be limited to indoor use only. Operation on oil platforms, cars, trains, boats, and aircraft is prohibited, except for large aircraft flying above 10,000 ft.

Antenna Specifications

FAP-231G

FAP-233G

European Conformity (CE) - EU

This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.

The product transmits within the frequency ranges and less than or equal to the power listed below:

• 2402-2480MHz: less than 20dBm
• 2405-2480MHz: less than 20dBm
• 2412-2472MHz: less than 20dBm
• 5180-5240MHz: less than 23dBm
• 5260-5320MHz: less than 23dBm *
• 5500-5700MHz: less than 30dBm *
• 5925-6425MHz: less than 23dBm

Note: * Only with DFS bands certification.

This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Simplified EU Declaration of Conformity: This declaration is only valid for Fortinet products provided by Fortinet or its authorized partners. Any Fortinet products not obtained directly from Fortinet or its authorized partners may not comply with EU Directives.

Declarations in multiple languages (Bulgarian, Czech, Danish, German, Estonian, English, Spanish, Greek, French, Croatian, Hungarian, Italian, Latvian, Lithuanian, Maltese, Dutch, Norwegian, Polish, Portuguese, Romanian, Slovak, Slovenian, Finnish, Swedish) are provided, stating compliance with Directive 2014/53/EU.

The device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range in specific EU countries (AT, BE, BG, HR, CY, CZ, DK, EE, FI, FR, DE, EL, HU, IE, IT, LV, LT, LU, MT, NL, PL, PT, RO, SK, SI, ES, SE).

Compliance with 2014/53/EU Radio Equipment Directive (RED)

The following table provides information on the frequency bands used and the maximum RF transmit power of the product for sale in the EU:

UK Conformity Assessed (UKCA) - United Kingdom

The product transmits within the frequency ranges and less than or equal to the power listed below:

• 2402-2480MHz: less than 20dBm
• 2405-2480MHz: less than 20dBm
• 2412-2472MHz: less than 20dBm
• 5180-5240MHz: less than 23dBm
• 5260-5320MHz: less than 23dBm *
• 5500-5700MHz: less than 30dBm *
• 5925-6425MHz: less than 23dBm

Note: * Only with DFS bands certification.

This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

This product is in compliance with Statutory Instrument 1206 Radio Equipment Regulations 2017.

The full Declaration of Conformity for this product is available at: https://site.fortinet.com/ProductRegulatory/UK

National Telecommunications Commission (NCC) - Taiwan

The document includes specific regulatory statements for Taiwan, concerning low-power radio frequency devices, frequency changes, power adjustments, and interference. It also mentions MPE (Maximum Permissible Exposure) values for FAP-231G (0.52328 mW/cm²) and FAP-233G (0.48054 mW/cm²), recommending a minimum distance of 20cm from the human body. It states that this equipment must be installed and set up by professional engineering personnel and is not for direct sale to general consumers.